Mazda BT50 Fourbie Sessions Australia

แชร์
ฝัง
  • เผยแพร่เมื่อ 10 ก.ย. 2016
  • We had been getting a lot of questions about the mazda and what we had done so we thought we would do a short video of it with a run down of what was on it.
    / fourbiesessionsaustralia
    / timmyotoole
  • ยานยนต์และพาหนะ

ความคิดเห็น • 48

  • @jasonbriggs2572
    @jasonbriggs2572 5 ปีที่แล้ว +1

    Absolutely beautiful.

  • @motaman2541
    @motaman2541 6 ปีที่แล้ว +1

    I quite like the blue myself, what’s the biggest tyres you can get under with stock lift, my Mazda need bigger tyres to fix speedo. Cheers

  • @michaeltoomer4090
    @michaeltoomer4090 6 ปีที่แล้ว +1

    Tough Rig! Nice place for the light bar behind the grille. 👍

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  6 ปีที่แล้ว

      Michael Toomer thanks mate. Stops thieves to as you don’t see it unless your looking at it at night :)

  • @beast_mode2662
    @beast_mode2662 6 ปีที่แล้ว +1

    Gday mate! Beautiful beast you have there!
    Are you running a 4” Suspension lift and 1” Body lift?
    Did you have to make any major changes to do the sus lift?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  6 ปีที่แล้ว +3

      Beast_ Mode it ended up being 3.5in after the springs settled and one inch body yes , but no changes was all stock underneath. I could of done diff drop and upper control arms but choose not to and I got 240,000kms out of that setup with no issues

  • @ADHDBunyip
    @ADHDBunyip 7 ปีที่แล้ว +2

    Seriously LOVE that tyre gate, always looking for options to get my spare out from under the tub of my Triton. It's not an ideal place if you're off road and in an awkward spot.

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  7 ปีที่แล้ว +2

      BunyipDemi thanks mate glad you love it. Ben from off road fabrications did a great job. The 35in tyre just won't fit underneath so this was a great idea 💡.

    • @porky3384
      @porky3384 7 ปีที่แล้ว

      Fourbie Sessions Australia Big Blue looks great! Mate did you have to cut the corner off your guard when you took the honeycomb plastic out mate?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  7 ปีที่แล้ว

      Paul Qualischefski once I pulled that out I tapped the corner in a little and then cable tied the inner guard back to the chassis

  • @dratempest610
    @dratempest610 5 ปีที่แล้ว +1

    Looks awesome mate , great vid

  • @Bushrookie820
    @Bushrookie820 5 ปีที่แล้ว +1

    Hey mate I’m from central coast too lol heard you mention lake haven haha. Think I’m about to buy a BT-50 but I’ve heard some pros and cons. Have you had any problems with yours that you’ve had to fix and was it expensive to fix?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  5 ปีที่แล้ว +1

      Dylan Law hey brother coast life man 🙌. Mate yeah there is heaps of pros and cons. I sold big blue with 240,000kms and in that time it did a Input shaft bearing in the gear box and that’s all. I broke one cv and did a diff but this was over 150,000kms when I did it. I wish I bought another the np is good but I’ve had to spend double the money on it to do as much as what this did. Hope that helps man.

  • @Lcr34
    @Lcr34 6 ปีที่แล้ว +1

    Hows 35" doing? Feeling loss of power? Ive scoured the webs and couldnt find regearing option for bt50/ranger.

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  6 ปีที่แล้ว

      Lcr34 mate they go great. You do lose some power and fuel economy but the advantages off road are endless.

  • @GrozOutTV
    @GrozOutTV 5 ปีที่แล้ว +1

    Bull bar without a hoop is nice man cant wait to get my first 2013 bt-50 xt

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  5 ปีที่แล้ว +1

      GrozOutTV still the best ute I’ve owned

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  4 ปีที่แล้ว

      GrozOutTV I blocked the egr at 100,000 and from then had clean oil every change. I serviced it every 10,000kms and ended up selling it with 250,000kms and no issues. Was a great ute

  • @chrisrobinson2563
    @chrisrobinson2563 6 ปีที่แล้ว +1

    hey mate i saw in a previous comment you have a 3inch lift in the front. have you dropped the front dif to do so?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  6 ปีที่แล้ว

      Chris Robinson hey mate no I haven't done a diff drop as yet mate. I've had it up to 4inch with no diff drop :)

  • @zanenelson7641
    @zanenelson7641 4 ปีที่แล้ว +1

    Have you had any issues with the engine what so ever, and how’d ya go with the body lift, what did you have to modify to fit the body lift up

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  4 ปีที่แล้ว

      Zane Nelson never had a single issue. Loved it ended up with 250,000kms on it when I sold it. It was only one inch body which ment nothing needed to change which was great.

  • @ericjansevanrensburg4995
    @ericjansevanrensburg4995 9 วันที่ผ่านมา

    That is insane nice ute bud

  • @simonpalajda7507
    @simonpalajda7507 6 ปีที่แล้ว

    hey mate, did you have to change front brake lines for 4 inch lift???

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  6 ปีที่แล้ว

      Simon Palajda hey mate no I didn’t all standard. 👌

  • @dylanb1604
    @dylanb1604 7 ปีที่แล้ว +1

    Hi mate, what size and offset d lockers are you running?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  7 ปีที่แล้ว +1

      Dylan Berglund they are a size 16 man and pos20 offset 👌

  • @vevohoeyo
    @vevohoeyo 7 ปีที่แล้ว +1

    hey how do those tyres go? do you get many kms on the road out of them?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  7 ปีที่แล้ว

      vevohoeyo very well off road on road they are a little slippery but still good. I have over 60,000kms on them and they are still going.

  • @psy06
    @psy06 7 ปีที่แล้ว

    whats needed to run 35's on it mate ? any rubs ?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  7 ปีที่แล้ว +1

      psy06 mate not a lot really I have had it set at 3in or just over in the front and you take a honey comb plastic out of the inner front guards pin the guards back and that's it really. The bigger the lift the better tho but it doesn't have to be crazy they fit well

  • @dangleeson7917
    @dangleeson7917 7 ปีที่แล้ว +1

    Happy with that exhaust mate? I'm going to get the same one

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  7 ปีที่แล้ว

      Dan Gleeson yeah mate it's still going strong. No leaks or cracks either 👌

  • @braedenkludass2517
    @braedenkludass2517 4 ปีที่แล้ว +1

    Looks great, has it let you down lately tho? I wanna know ..

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  4 ปีที่แล้ว

      i ended up selling that one with 270,000kms on it and was still going.

  • @lukedontknow9283
    @lukedontknow9283 2 ปีที่แล้ว +1

    Would you recommend a bt 50 for a hard core 4wd?

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  2 ปีที่แล้ว

      I loved it. There was nothing that twin locked Bt couldn’t do. I use to say to friends when they asked how’d it go and my response was the car has bigger balls then I ever will 😂. Thanks for the comment Luke

  • @thunderbox91
    @thunderbox91 6 ปีที่แล้ว +1

    Looks good mate, but can i suggest you get a camera with video stabilization will make the videos a lot less jerky and more enjoyable

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  6 ปีที่แล้ว

      thunderbox91 thanks mate not a bad idea this was by iPhone so wasn’t to bad better ones to come. Thanks for watching

  • @serg_end9801
    @serg_end9801 6 ปีที่แล้ว +1

    прикольная машинка

  • @ozyrob1
    @ozyrob1 5 ปีที่แล้ว +1

    Nice mods 👍

  • @Abu7929
    @Abu7929 5 ปีที่แล้ว +1

    I like these. I was gonna buy one, but the salesman was some kind of fuckin smart arse so I went to Toyota and got a Hilux instead

    • @f.s.aearthmoving4x4
      @f.s.aearthmoving4x4  5 ปีที่แล้ว

      Abu7929 oh really that sucks man. How’s the lux tho

    • @Abu7929
      @Abu7929 5 ปีที่แล้ว +1

      Beautiful ute mate, would do it over again. Other than maybe a Silverado

  • @Primelegend1
    @Primelegend1 7 ปีที่แล้ว +1

    Warning!! Their is a Martian that is working for Dobinsons at Sydney, you could say that he has been sprung!