Anet Upgrade - Marlin 1.1.9 - Chris's Basement
ฝัง
- เผยแพร่เมื่อ 23 เม.ย. 2024
- We upgrade an ANET printer to Marlin 1.1.9.
00:00 Intro
00:43 Install
04:10 X and Y Minimum
08:19 Conclusion
Marlin link:
marlinfw.org/meta/download/
Arduino IDE version 1.8.5:
www.arduino.cc/en/Main/OldSof...
Skynet board definition:
github.com/SkyNet3D/anet-board
CH340 driver:
sparks.gogo.co.nz/ch340.html
ANET E10 config I create in this video:
drive.google.com/open?id=1Q3i...
ANET A8 config:
drive.google.com/open?id=1f5R...
SUPPORT THE CHANNEL BY CLICKING THESE LINKS!
OpenBuilds - Great CNC and 3D Printer Parts (aff)
openbuildspartstore.com/?ref=...
Slice Engineering - Mosquito Hotends (aff)
www.sliceengineering.com/?p=r...
Wham Bam Systems Flexible Beds (aff)
bit.ly/2HoS1cV
Amazon (aff) [US DE GB CA IT ES FR JP]:
www.amazon.com/?tag=chrisbase...
Banggood(aff) ban.ggood.vip/7vm3
Aliexpress(aff) s.click.aliexpress.com/e/UrRbCm8
Buy me a coffee to keep me going!
buymeacoff.ee/Wc0DouFbl
You can support my work on Patreon
/ brotherchris
One Time Tips, You Can PayPal Me:
www.paypal.me/ChrisRiley3D
----------------------------------------------
Find Me Over On Twitter!
----------------------------------------------
Twitter : / chrisriley3d
FTC Disclaimer: A percentage of sales is made through Affiliate links
As an Amazon Associate I earn from qualifying purchases. - วิทยาศาสตร์และเทคโนโลยี
Another great tutorial! and this time I understood what you were doing, Marlin is getting easier every time, my practicing with it has helped me tremendously.
Thanks man, I am glad it's helping.
Some helpful stranger recommended this channel and I'm so glad to have found it. Firmware stuff used to be a lot more intimidating to play with. Not anymore. Thanks Chris!
Awesome! Thanks for watching!
Hi, Chris'
you have definitively the best tutorial for updating printers.
thank you
Thank you so much!
Awesome Chris, great video and upgrading isn’t that hard I went through all that almost by my self, but thanks to you help I got it working. Btw, I already receive the proto pasta highblue filament from your giveaway, and it’s awesome ! Thanks!
Awesome! I love that color. Thanks for watching as always!
This video as well as the one you did about setting up the Nimble extruder made it possible for me to upgrade the firmware on my E16 and configure it for the Nimble. I was getting good quality from that machine before but now it's approaching perfection. Thank you and keep doing what you do.
Awesome Chuck, I am glad the content has helped you out.
It really has. I had no experience with firmware or custom g-code at all and with the information you offered in your videos I was able to configure and tune my machine and have it working better than ever in a single day. Thanks again!
Hey Chris! I really love your videos, you have given me so many inspirations for my 3D printer and I just love the way how you explain everything step by step.
Have you ever considered to make a tutorial how to add an additional small LCD display to show the nozzle and bed temp from far away?
Thank you, I am glad you like the videos. Have you seen this one? th-cam.com/video/Rm-l1FSuJpI/w-d-xo.html Maybe this is what you are looking for.
Chris Riley I have, good Sir ... two of them are standing in my living room after I followed your “How to” ;) I was more thinking about a small display which I can attach to the frame.
@@TheAMGSL63 Hmmm, that's interesting, like a big number display so it's easy to read maybe? I know there is code in Marlin now to output codes to and LED matrix, I will have to dig around, that could be cool.
@@ChrisRiley I didn't know Marlin had that option. I'd be very interested in it too.
Thanks Chris, I will have to try this when time permits.
Thanks John, let me know how it goes.
Awesome as always! Thanks for showing just how easy it is to get it going! Now i can link this video to everyone that asks "How do i upload?"
Thanks Brandon! This was a video out of necessity, hopefully it is helpful.
@@ChrisRiley I would have done one... but you are better at this!! and been doing it longer... plus i haven't put 1.1.9 on my E10 yet... but i do have almost all the cr10 "features" except for power off resume cause the extra writing to sd card has me on the fence of reliability...
@@TekkieDad Thanks man! Agreed, power off resume, not great.
thanks for the tutorial, helped me alot. My printer squished my prints toward the end of the printbed, because it didn´t want to go further than 270mm from it´s incorrect defined zero.
You're welcome, glad it helped you.
Finally I found clear and correct instruction how to do upgrade and successfully got my A6 with Marlin, thanks a lot.
You bet, glad it helped you.
@@ChrisRiley FW is amazing, bed leveling now is so easy and result is perfect, I even took off bed springs and fixed it, now bed is more stable.
@@DmitryFedotov Very nice, glad it's working out for you.
Great video Chris. I recently upgraded my E10 to 1.1.9 using a version from Thingiverse for the E12 but watching your video I can now go through it to make sure everything is set right. I'm pretty sure it is, but best to make sure.
Awesome, thanks for watching Andy!
Wow thank you very much! Well done Chris!
Thanks for watching!
Another Good One... and thanks for the ending... Swack!
Thanks Mike, that was just for you. :)
lol. Right timing m8. I was thinking of upgrading the marlin firmware on my anet a8.
Awesome!
Thanks men really helped me out
You're welcome!
Very cool! Always like your vids..keep em coming!
Is this for the Anet V1.5 board?
Thanks! I think that is a 1.0v, I would have to go look.
@@ChrisRiley I have a A6 board 1_5 too, and I wonder if the skynet hardware config for a 1_0 board will be ok?
@@christofhagedorn I am not 100% sure, but I think it would be ok. The hardware differences are minimal.
Thanks buddy I really needed that...lol
You are very welcome!
BIG thanks! My E10 now have 119 Booojaa! 😁👍
Very nice!
Hi Chris! Your videos are awesome!
Recently I bought an Anet E-10 and every time I try to print the heated bed is uneven. I dismounted the heated bed and tried to align the metal pieces the straight as possible but it continues to be uneven. If I level the margins the center stays too high and the nozzle can't extrude, if I level the center the margins stays too low. Can you help me to adjust the bed leveling? What should I do? The 3D printer version is ANET V2.0. Do you recommend me to upgrade it to Marlin 1.1.9?
Marlin 1.1.9 is good, but probably won't help you with your bed. Is the bed flat? How it is un-level? Is it random spots or low or high on one side or another?
@@ChrisRiley Hi Chris! Yesterday I bought a piece of glass with the same dimensions of the bed and I leveled it the best I could. Now it seems to be leveled right. Just need some adjustments in some points, but it's much better than before! Do you recommend me to upgrade the firmware to Marlin 1.1.9? Thanks for your reply!
@@0trog Great! If you are on stock ANET Marlin, then yes, it's much safer then stock. If you are on another version of standard Marlin, like 1.1.6 and up, then it's probably not worth the hassle.
Thank! Today I will try to update my Anet E10.
Sweet!
@@ChrisRiley
Now, if I type, via octoprint, then I get the following error:
Unexpected error while reading serial port, please consult octoprint.log for details: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2605
Please see faq.octoprint.org/serialerror for possible reasons of this.
Changing monitoring state from "Printing" to "Offline (Error: SerialException: 'device reports readiness to read but returned no data (device disconnected or multiple access on port?)' @ comm.py:_readline:2605)"
Connection closed, closing down monitor
You do not know what it can be?
@@DD-cb1ln The update to your board was successful? Everything still working from the LCD screen? Is your baud rate/serial port set to auto?
@@ChrisRiley
>The update to your board was successful?
Yes
>Everything still working from the LCD screen?
Yes
> Is your baud rate/serial port set to auto?
No. Octoprint see printer only like /dev/ttyUSB0.
I also set #define POWER_LOSS_RECOVERY
@@DD-cb1ln You might be push the memory to close to the limit on your board. Try turning power loss recovery off and re-flash, see if it starts working.
Great video. You have a really good presentation, all the facts and quite quickly too! I have a new A8M dual extruder type and it has the BIQU KFB 2.0 control board. I did not believe it uses Skynet? Can you help with this upgrade?
I think that board is supported by Marlin. If not, you can probably use the MKS Gen L setting. They are almost the same thing.
Hi Chris, I am new to 3d printing, I see lots of vids on how to get the Merlin firmware on my Anet A8, however I don't see any vids on how to actually do a print, as in , I want to lower the bed temperature to 20 degrees so I change it in PLA conf in the LCD and save changes but when I go to print from sd card it heats up to 60 degrees, do you have any vids that can explain this ? Thanks p.s. doing a great job
Thanks! That is controlled by the slicer. Check out this video th-cam.com/video/d4alPrZ3wG4/w-d-xo.html this might help, let me know, I have a few others as well.
Thanks Chris. Great video. I just got an Anet E16 and want to put Marlin on it. You are saying that on the Base Anet code, there IS a bootloader, so no need to mess with a programming device? Just connect, make sure drivers are correct and flash away?
The boards have changed over the years. Some have boot loaders, some don't. It is worth a try though before flashing a bootloader on, just give an upload a try.
@@ChrisRiley whats the worst that can happen, just fail right?
@@markferrick10 Yep, if it doesn't load, it will just through an error, no harm no foul.
@@ChrisRiley Just fyi, the E16 does NOT have a bootloader. Used a USBasp to install one.
@@markferrick10 Thanks, good to know.
Thankyou very much cool. I seems it the samething with anet E12 because it's same motherboard
Yep, should be almost exactly the same steps.
Hallo Chris, very nice Video. thanks for that. I have an Anet E12 with Version 1.0. Have i Bootloader? Would I change parameters on E12 the same as E10 ?Thanks
It should have a bootloader. E12 should be really close to the E10. The steps might be a little different, but that's it. Count the teeth on your pulleys is about all you will need to do.
Hi Chris, Will I be able to use Bltouch bed leveling sensor? Would I change parameters on E12 to 80 as well ( 80 from 100 for E10)? Thank you very much for making this video.
To add a Bltouch you would have to hack the LCD cable and use those pins. As far as the steps, you will have to count the teeth on the pulley. I am not sure what which one the 12 uses.
what I would like to know is, how do I set the retraction when the printer changes color I am looking at about 160 mm retraction
You should be able to change that in the advance pause feature settings in configuration_adv.h
Chris, can I request a video/time-lapse on that incredible failed dragon print that you had? I hope you got that on video!!
I did, it's not great, but ask and you shall receive. th-cam.com/video/Z4HgA_yBeIk/w-d-xo.html
Hi Chris. You are my go to 3d printing guru. Can you tell me if the bootloader you describe here will work on my Tronxy X5. It has the standard board with Marlin 1.1.5 installed and I want to go to 1.1.8 or 9.
It depends on what chip it has, but if it's the 128 chip, it should work fine.
@@ChrisRiley Thanks Chris.
I have been trying to understand Marlin a bit, especially with respect to dual z stepper motors. The anet E10,12 and 16 have dual z steppers, but I cannot find where dual z steppers are enabled. There is a setting in configuration_adv.h, but it is not enabled. Do you know? Thanks
Hey Mark, you really only need to enable something if you are using 2 Z stepper drivers or 2 Z endstops. If you don't have either of those, you can just hook both Z motors up to 1 driver and you should be all set.
@@ChrisRiley So the steppers on the Anet V1.7 board are x,y,z1,z2 and e . We Flashed with 1.1.9, nothing I can see enables it, but it works. I'm confused...
@@markferrick10 More than likely the Z1 and Z2 are driver off the same driver, so they are different plugs but Marlin see them as one device, nothing to enable at that point.
@@ChrisRiley OK, Thanks...........................
Do you recommend upgrading to Marlin 2.x.x ? i'm using Anet A8 Plus.
Probably not until the official release comes out.
Good job Chris! Do you know how to upgrade the Anet model E16 with Marlin Firmware? If you do, would you mind explain step by step or via video! Thank you for any advice you can give to us!:-)
Thank you! It should be really close to this upgrade, just with the build volume a little bigger.
@@ChrisRiley I'm being trying to upgrade but no success so far! You made look too easy 👍 My hard time is such that even communicating with the printer through direct connection cable has not been achieved yet😨 oh well, I guess I'll just wait till see more info out there about it! Thanks Chris!
@@SidneyOlleJr See if this helps your connection issues. th-cam.com/video/y_p8UzLXUXI/w-d-xo.html
Hi, I have an Anet A8M double extruder with the motherboard PCB KFB 2.0 from Bigtreetech; I would like to know if you have the original firmware or Marlin firmware. Please make a video explaining how to upgrade. Thank you
Hey, I really don't know anything about that board. Sorry about that.
@@ChrisRiley thank you
I’ve tried to install marlin with just the regular usb cable, but the Anet 1.0 board in the Arduino IDE didn’t work. I then tried selecting atmega as board and it did upload the files... but the LCD is just blank and the buzzer in the LCD keep on buzzing really loud... did I kill my Anet 1.7 board?! Or am I able to restore it using a usbasp? :) hope you can help me, because I don’t know what to do
You should be good, you just need to use the skynet board option. That should fix your problem.
It worked with the usbasp :)
@@jonasborneland5808 Good deal!
hello, I have an e12 anet, to which the motherboard was burned.
I bought the motherboard of an anviz a6. What I need is to install the firmware of the anviz e12 on it, can you help me with that? thank you.
You mean an ANET A6 board? If so, it should be the same as the video.
I agree, the motherboard who y bought is v1.5
Hi Chris, ive followed your video which has been great, but when i go into cura, all the x,y,z are moving correctly but if i home all im hitting the bed, how do i set this, im new to this :)
With none of the endstops triggered, run a M119 command. It will tell you the endstop status. If Z in not triggered, put your finger on the Z endstop and run m119 again to see if it is. The logic might be messed up for that endstop.
@@ChrisRiley Thanks ive got that part sorted now, my other problem is when i home all the home point is not in the center, i follow what you say then it goes in the centre, but then when i do the auto leveling its starts too far away from the front causing it to probe off the back of the bed, can you help with this also please :), and when i shut the printer down is it right that i have to then load the last settings
@@carolewhite9632 I am not sure what you mean about loading the last setting. The probing location is all about the probe offset settings. Make sure your home settings are correct as well. If you are out side of the bed when you home, make them negative values.
hi! i see your video but Can you install marlin 2.1 in your anet e10? plz
Hey, I no longer have the E10, but it's very much the same as this install. studio.th-cam.com/users/videoIb188-ACa08/edit
is this code on the board or is this cura 3.5.1 the old board would print to scale right of out cura
This is Marlin, it should work as expected on a A6 or A8, the E10 needs a little tweaking.
Hi Chris I purchased a new Anet 3D V1-5 , Installed the board and all it does the light starts flashing on the board, the buzzer starts intermittently buzzing and does that for about 5 to 10 seconds , the led goes off the buzzer still keeps buzzing, nothing on the control screen, is the board bad and needs to sent back or is it firmware, still learning
Wow, that doesn't sound good. I should already have firmware on it I think. I am thinking there is a problem with the board.
Chriswell it was the firmware, put a bootloader on it ,uploaded the firmware and now it is working fine. Used TH3D the board did not come any thing on it.
@@markshipman8897 Great! Glad it's working.
Hi Chris, after installing Marlin 1.1.9. I have printed several items without problems from the board SD card, I then connected to my pc via a 1 metre usb cable, I then started getting garbled lcd displays and prints going wrong ie printing in the wrong place, have you had any problems like this ? thanks
Strange, what program are you using to print?
@@ChrisRiley I am using Cura 4.0 when sending from the pc
@@acestu Cura is probably setting the center of your printer. The garbled LCD is pretty common. Does it clear up if you hit the controller button?
@@ChrisRiley The LCD garbled is there until a restart, and what I meant by printing in different places is I was printing out 1 of 4 wingnut big dials for the bed and just after half way it started printing about 6mm out on the y axis, strange I know, it's as if serial info from the pc is getting garbled, sd card no problems
@@acestu Really strange, bad cable or something maybe, not sure.
Hi Chris,
I've got some problems in upgrading the firmware of my Anet A8 to the Marlin Firmware 1.1.9. I've done everything according to your description, but when compiling the firmware, I always get a lot of error messages regarding redefining of timers (see example):
In file included from C:\Program Files (x86)\Arduino\hardware\arduino\avr\cores\arduino/Arduino.h:257:0,
from sketch\HAL.h:36,
from sketch\MarlinConfig.h:39,
from sketch\G26_Mesh_Validation_Tool.cpp:27:
C:\Users\Michael\Documents\Arduino\hardware\anet\avr\variants\sanguino/pins_arduino.h:43:0: warning: "TIMER2" redefined
#define TIMER2 5
at the end of the compilation, the message says:
Der Sketch verwendet 104094 Bytes (81%) des Programmspeicherplatzes. Das Maximum sind 126976 Bytes.
Globale Variablen verwenden 4096 Bytes des dynamischen Speichers.
So lack of memory space seems to be not the problem.
I'm using the arduino IDE 1.8.5 (but also tried 1.8.8). When I compile the firmware for a MKS Gen 1.4 Board, there is no problem at all.
Any idea, what could solve the problem?
Michael
Interesting, it has to be the sangino library. I would try to reload that.
Hi Chris! Great videos mate! Very professional and pleasant tutorial! However I am having a really hard time trying to flash my Anet A8 with a v1.0 board. Can't get either my Toshiba Satellite A300 running windows7 Ultimate 64bit or MacBook Pro running OS Mojave to see the board! On Windows there seems to be an issue with the CH340g driver, won't install the driver. The installation program shows "error code 10" and when I try to update the CH340 driver it says "the driver is successfully Pre-installed in advance" and in the device manager it shows up with the yellow exclamation mark. This is really frustrating! I have tried every method I could find on the net. I have even partitioned my hard drive and installed a second Windows 7 but a 32 bit. Still the same problem. I have been at it three weeks now day and night!!! Please, "Help me if you can, I'm feeling down" as the Beatles would say.
I have fought this before, and it is really frustrating. Can Pronterface connect to it to control the printer? Have you tried a couple of different cables?
@@ChrisRiley Hi Chris! Thanx for responding so quickly. Yes I have tried different cables. I haven't tried Pronterface. Atm. I have just managed to burn the bootloader with a USBASP and I just got this: " vrdude: stk500_recv(): programmer is not responding"
@@user-uc1vc5xw3g This isn't the first time I have heard of this issue. I am not really sure how to get around it. I think it might be an issue with the ISP interface on the board. About the only other thing I know to try is to cable up to another Arduino and try to get in that way.
What if I was to get myself a better board, what would you suggest. In a moderate price range. We have been under extreme austerity measures here in Greece for close to two years now! That's beside the point...
@@user-uc1vc5xw3g I would probably look at something like an MKS 1.4, you'll need some motor drivers to go with it, but they are pretty cheap.
Chris can you elaborate on the issues you have had with 1.8.6 and 1.8.7 of the Arduino IDE - is it documented somewhere?
I don't know if it is documented or not. When I try to compile Marlin with .6 or .7 it complains about the comments next to some of the lines in the code. If you go through each line and delete the comment, eventually it will compile, but it's a lot of headache so I am just staying on .5 for now.
@@ChrisRiley I am trying to config for a Hypercube Evolution with a RAMPS1.4 so I have no example starting point. With a vanilla configuration.h and configuration_adv.h it compiles in 1.8.6 fine but there may of course be a small section of your config enabled that is causing the issue. Did you note *what* parts were troublesome?
@@havenview I ran into it last when I tried to compile a sangino board for a CR10. I don't remember what it called out that it didn't like, but I will give it another try and see what happens.
@@ChrisRiley thanks. I've looked at several methods of marlin config and it's certainly not as easy as the Repetier web config tool. I just hope the effort will be worth it
@@havenview I think you will be very satisfied with the change over.
can the e10 config be used on a anet e12?
Sure, you'll just have to make a few updates. Not sure what pulleys the E12 uses.
Hey! I have that printer! Does this mean I have the new Marlin on this Anet board? I was planning to change out the board for a Ramps/Mega I have sitting around the house, but if I already have it set up, then bonus!
Where the Heck is that filament coming from? It's just hanging there in mid-air! :-)
Yep, you have the most current config of 8bit Marlin on that machine. You are all set.
@@ChrisRiley hey, I ordered one of those inductive probes for this project. Is that going to work on the pei covered glass bed you sent me?
@@JohnDStrand I think it will probably be to thick, but with the probe you might be able to print right on the metal bed.
Chris Riley ok, thanks! I have a few weeks before it arrives, so I’ll play around with it and let you know.
Hey i have a problem on my mks gen 1.4 my Extruder 0 (heater) it's broken, un the moment i turn on the machine And start heating but i don't ser anything so can you help me and chance the pins from heater 0 to heater 1?
All you should have to do is swap them in pins_ramps.h Change this to D7 #define HEATER_0_PIN RAMPS_D10_PIN
@@ChrisRiley i'm gona look for and m
Later i'm gona tell you thanks
@@ChrisRiley i have an error called 'RAMPS_D7_PIN' not declared in this scope
Hey, what board do you have configured in configuration.h?
@@ChrisRiley don't worried i fixed by set 2 extruders in marlin
Chris, off the subject but I have a LESHP Z1 printer and it is stopping at random places, going over the same spot, the extruder runs filament in and out. Was running with octoprint but it would lose communication, time out. now I went to just using the SD card and this happens. Is it the motherboard or softwere( noobie) need help
Wow, yeah that sounds like a processing error. Is it stock? Anything changed?
mother board is stock, I have made a bunch of upgrades to x y and z axis. I guess what would you do, we are talking rookie here ,or recommend as what I should do. the board is something I have not found, but it is running Marlin V1.0 , is there anyway put pictures on here ?
@@markshipman6633 You can post a link from google photos or something, if it blocks it I will let it through.
ok
@@ChrisRiley I ended up replacing the motherboard so I'm not gonna try to do anything with the other old board but thank you for Listening , Probably gonna be listening to more of your channels cause I'm thinking I'll have to update these Anet A6 boards, I ended up replacing it with an Anet A6 board, Unless you recommend some different board that might be better
my problem is the mk2 have a 2.0v anet board
¿no matter?
Yeah, probably no bootloader.
tryinng to update my Anet A6 and getting a error U8glib.h:no such file or directory
Hey Mark, you need a library. Check this out. docs.google.com/document/d/1-9qrvoH3oKmzG-ViZOhR2FxJUBQVTUmlIaJ9zQ-Ppqc/edit?usp=sharing
now I am up to using 99%of my memory must of put something in there that used it up, thankyou for the info, did figured it out, newbie
@@markshipman8897 Cool, yeah 128 doesn't go very far.
Another benchy for the stack, how high can Mrs Riley go :)
Exactly! Still waiting to see someone do more than 9. ;)
Hi Chris,
I try to update my Anet A8 but get the next error by compiling the files (downloaden from your site :-) ) not thts the problem i think, but can you help me im stuck in the problem and can`t find out where te look.
Arduino: 1.8.5 (Windows 10), Board:"Anet V1.0"
In file included from sketch\endstops.cpp:35:0:
sketch\endstop_interrupts.h: In function 'void setup_endstop_interrupts()':
endstop_interrupts.h:121: error: non-constant condition for static assertion
static_assert(digitalPinToPCICR(X_MIN_PIN) != NULL, "X_MIN_PIN is not interrupt-capable");
^~~~~~~~~~~~~
In file included from C:\*\*\AppData\Local\Arduino15\packages\arduino\hardware\avr\1.8.2\cores\arduino/Arduino.h:258:0,
from sketch\HAL.h:36,
from sketch\MarlinConfig.h:39,
from sketch\Marlin.h:35,
from sketch\endstops.cpp:27:
d:\Program Files (x86)\Arduino\hardware\anet\avr\variants\sanguino/pins_arduino.h:117:66: error: reinterpret_cast from integer to pointer
#define digitalPinToPCICR(p) ( (((p) >= 0) && ((p) = 0) && ((p) = 0) && ((p) Voorkeuren.
Thanx in advance :-)
Looks like there is a bunch of stuff going on there. You just want to upgrade Marlin? It would probably be easier to grab a newer version.
@@ChrisRiley No its still the stock software on the board.
Its going to be used for a xy-core printer DIY.
I would love to see a tutorial on how to do an update for anycubic i3 mega, because with this printer it is difficult for a beginners (like me: D) due to the touch screen
Ah ha, I have a buddy with one of those. Maybe he will let me borrow it for a video. Thanks for the suggestion, I will look into it.
Oh yeah... I can't wait to watch that, together with the rest of the i3 mega and chiron owners (same motherboard and display), also greetings from Poland: D
Please can I install on anet ET4? Do I need a video or do I need something more?
I don't know, you might lose the use of your touch screen, what mainboard does it use?
@@ChrisRiley The printer motherboard is ET4-MB_V1.1 The motherboard of the LCD panel is LCD28-ET_V1.0
@@mara987_ it doesn't appear to be currently supported.
@@ChrisRiley I decided to install merlin firmware because of the extruder calibration. Anet ET4 cannot specify another step of the extruder motor with the M92 function, nor does the M501-503 function (read and write to EEprom). If there is no merlin support on ET4 then I can't install it :-( Is there something wrong with this problem?
@@mara987_ There is no pins file for it, so a lot of stuff isn't going to work. I would go back to ANET firmware and wait a little longer.
I didn't have a problem updating my Anet A8 with Arduino Version 1.8.7 once I disabled real time scanning in my anti-virus program.
Cool, good to know, I have had some unpredictable results with different boards.
You whacked the Benchy of the plate?!? Finally! #LikeRidingABike? #Whack-a-Benchy #OldeTimeSake #Nostalgia.
lol, I have had requests to bring it back, it feels good. :)
The Mk1 And the mk2 use the Same screen?
I am not sure on that. I don't own a later version.
so chris when i get to marlin ino it's there but read only nothing else is there ? what am i missing ?
Most of the time, this is caused because I forgot to do an extract all on the package file after I downloaded it.
Chris Riley well I thought I did do that I will try again after work tonight ! Plus I’m having issues with it when I print old firmware it doesn’t stick and pulls up
did the same chris so i have no idea wth !!
@@michaelkozakowski8094 Strange, is it 1.1.9?
Chris Riley yeah it is
hi Chris, will you please do the same for CR10S ?
I would, but I don't have a CR10S.
I have done the 1.1.9 with my CR10S , all seems to be OK but something really wrong with homing. it does X and Y homing fine but as soon as it starts to move to Z zero, does some 10mm move and than all stops - "printer halted". cannot get the reason why.
@@edishergiorgadze4413 Does it have a bed probe? What does the M119 output look like?
@@ChrisRiley Thanks Chris for coming back. No, no probe whatsoever. M119 - classic
SENDING:M119
Reporting endstop status
x_min: TRIGGERED
y_min: TRIGGERED
z_min: open
filament: TRIGGERED
@@edishergiorgadze4413 If you hold your finger on the Z endstop and do M119, does it now say triggered?
Forgot mention it is designed after Anet A6
mark again, printing with the anet board, the size change about 25% bigger , help agian
It has to be pulley size. Is this the A8? I think it has 18 tooth, your M92 X and Y should be set to 80.
no it is a LESHP Z1 model, it has a 20 tooth pulley , and the Anet A6 has a 16 tooth pulley, Didnt look far enough , rookie again, i am assuming the other axis has the same pulley but i will check so what am going to do is purchase two pulleys instead of playing with firmwear for right now. still a rookie, if you argee with what I going to do, that way i have two printers the same boards,stepper motors 42SHDC3025-24B, same pulleys. thankyou for your advice,appreciated very much
Anytime Mark, do a M503 and look and see what the M92 line says, then I can confirm what pulley you would need.
OK that sounds good I'm not really good with firmware yet so I don't know how to do them commands in cura or where I have to do the commands at, Going to try the pulleys on the other printer and see what I come up will 1st I will let you know
And again thank you very much
How you doing Chris
Great Paul! How are you?
for anet a8 plus
???
chris i am at my end here i can not get my 3d printer to upload the marlin firmware. i have done all, if my anet e12 is v1.0 and not v1.5 will i need to get a boot loader. it compiles when i verify but when i go to upload it says after 10 attempt not able to upload and give me a website to go to find further information!! i just want my anet e12 to have the thermal runaway active. you know so my house doesn't burn down. the exact error
Using Port : COM5
Using Programmer : arduino
Overriding Baud Rate : 57600
avrdude done. Thank you.
Problem uploading to board. See www.arduino.cc/en/Guide/Troubleshooting#upload for suggestions.
Donald, this can be extremely frustrating. So what does it do when you cable up USB to the board? Unplug it, open up control panel and expand COM ports. When you plug the board in, what com port does it come up as and what does it say next to it?
@@ChrisRiley well, before it would say unknown device, i fixed that problem, but the port it would use is what ever usb slot i would plug into. so does it matter that the anet e12 i have is verision v1.0 and v1.5
@@donaldkratzer4877 Does it call the com port a ch340? From what I have heard the 1.5 doesn't have a boot loader. But the 1.0 does.
@@ChrisRiley no it is sometime port 3, or 4
@@donaldkratzer4877 You might just need to reinstall the CH340 driver. Try a couple of different USB cables as well. sparks.gogo.co.nz/ch340.html
Hi
A8 Plus - I bought a new motherboard (1.7).
What is the problem?
Short video link: th-cam.com/video/hM_t6l24e4s/w-d-xo.html
It almost looks like there is no firmware on the board. It's just send voltage to the screen.
Hi, I need help I was buying the Marlin 1.1.9 compilation, this error came out, could you help me "Error Arduino Anet A8 Marlin Ramps 1.4" docs.google.com/document/d/14Fy1K4CSxbY7LL26fd_TYprl0j0u9rTts-w6q6mWmZQ/edit?usp=sharing
This might be the problem. docs.google.com/document/d/1-9qrvoH3oKmzG-ViZOhR2FxJUBQVTUmlIaJ9zQ-Ppqc/edit?usp=sharing
Config for Anet a8+ github.com/jonasborneland/anet-a8-marlin-config-file
Thanks for the link, there is also and example config in the marlin project as well.
Chris Riley Yes. But that’s for the normal A8 model, this is for the plus model A8+ that’s why I wanted to share this 😊
@@jonasborneland5808 Ah ha! Thank you, now I see.
Hi Chris!. Earlier this month I bought an Anet E10 Printer. I am a beginner to this machine. its heat bed is not leveled and when I start a print filament is not feeding. I am unable to print anything until today. just now I have upgraded my machine with merlin 1.1.9 successfully without a single error. but there is another problem not X direction is not working at all.
Please help me fix this issue.
I used this version of merlin to upgrade my machine.
From the description of this video.
ANET E10 config I create in this video:
th-cam.com/users/redirect?v=2csiT3S0qZc&redir_token=Pl1zuWI1a_HAHY0Fk5E061dJ1Sd8MTU3OTk5NzIzMEAxNTc5OTEwODMw&event=video_description&q=https%3A%2F%2Fdrive.google.com%2Fopen%3Fid%3D1Q3iZDynKvGVxXifS_Jt_PhwW1AuXYEl_
So your X is moving in the wrong direction or not moving at all? Adjust your endstop inverting and see if that gets it moving.
@@ChrisRiley thanks. All is good. Accept print quality
OK I must be doing something wrong I'm not real familiar with TH-cam yet
You can try and email me, brotherchris81@gmail.com
@@ChrisRiley ok
anet a8 config file
Do you need the default file?
@@ChrisRiley the file already configured if possible
@@PauloHenrique-hg7iw Here you go: drive.google.com/open?id=1f5RTusELkbKHjtqIHCitz4TWu1xh9-eI
@@ChrisRiley thx
This marlin firmware seems a little fishy if you ask me.
lol, now that one I like. Nice one James!
I'm seeing major issues with either Marlin 1.1.9 or Octoprint 1.3.9. I upgraded to both at the same time and there are lots of issues I'm coming across. Very frustrating.
Well that's no good, what kind of things is it doing?
it dosent work
Newer board? Probably needs a bootloader.
because my anet us the anet 2.0 and not 1.0
Correct.
drive.google.com/file/d/1-fu75fPsPRDQB1QGr3xyb83TZYuKKmGs/view?usp=drivesdk
drive.google.com/file/d/1T8L1KILCNTxtCoXkPu5KRub2m2w34FPM/view?usp=drivesdk
I want to thumbs down just for use of the word "dot"!
I deserve it.
drive.google.com/file/d/1f8HihXANz1lEEKg_qpkMe_G1TD_tjErS/view?usp=drivesdk
drive.google.com/file/d/1f8HihXANz1lEEKg_qpkMe_G1TD_tjErS/view?usp=drivesdk
I can't seem to access these links.