How To Make A Table Saw Fence For Homemade Table Saw
ฝัง
- เผยแพร่เมื่อ 16 มี.ค. 2017
- This time I will shop you, how to make a simple and accurate table saw fence for homemade table saw.
T track rail: shorturl.at/rvBFT
How I made a homemade table saw: • How To Make A Homemade...
How I made a crosscut sled for table saw: • How To Make A Crosscut...
You could support me and my content creation by buying Well Done Tips official outfit: teespring.com/welldonetips
Due to factors beyond the control of WellDoneTips, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. WellDoneTips assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. WellDoneTips recommends safe practices when working with the tools or equipment seen or implied in this video. Due to factors beyond the control of WellDoneTips, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not WellDoneTips. - แนวปฏิบัติและการใช้ชีวิต
one of the best and simple solution to realize a diy fence on the web, very good and useful job.
Thank you for a really simple design, with clear instructions.
Love your clean and easy tutorials!
i must have watched 20 table saw fence vids. your is the simplest
Detr
D
.trabajo de carpintería sobre la fi, gii
Just the thing I was looking for. Thanks for the tip!
fantastic, i've been searching for homemade tablesaws the last few days and your solution is the best I found. simple and efficient. congratulations.
simple pero epektibo....ang galing mo bro.
I made similar thing years ago when I was young, but yours is much better than I made.very well done
I was looking at buying a T track but getting one in the UK is difficult, they're so expensive, but your idea of just cutting your own from a square tube is brilliant.
Great job! So clear and concise. Thank you for sharing this
Very nicely done . Step by step. Thank-you I will try to make one I know it won't be as good as yours.
Good idea, but there's the introduction of flex to the far end of the fence. It would need to have rails and fasteners at each end, both requiring individual adjustment.
Thank you, congratulations !!
An excellently produced video. Thanks.
simplicity and elegant design well done
good idea , well demonstrated, hope to make this for my old tired table saw!
Great job.
really nice job mate, enjoyed that.
Mark McCluney i⑧itsok
One of the best hand made fence and easiest too till now I have been observing on U tube, thanks and best regards!!
Great job and simple to build. Very nice.
Without a clamping mech on the other side, would your fence not flex if you were to rip a long board?
Hey these videos and pictures are great and useful thanks for everything
Magnífico el soporte, me has dado la idea para hacerme una igual. Like
Opino que en el otro extremo debe llevar con soporte que ajuste a la mesa, pues la vibración o algún otro factor puede abrir la regla y causar un error de corte.
Pues hay firmeza al inicio y no a la salida
buena observacion amigo suerte en tu negocio es muy lindo la carpinteria
De acuerdo
Completamente de acuerdo. Algo asi como una varilla roscada que jale y ajuste el otro extremo. Saludos
Absolutely brilliant 😊😀😊👍👍👍👍👍, ace design in its simplicity, a few odd additions when I make mine, (in materials only), many thanks, liked,subscribed. I'm in the U.K.
Very very good easy and it’s plenty room to use hard wood thank you very much
Works great. I did add a rail at the top end of the table though.
Excellent Demo!
Thanks for the video, the fence that came with my saw broke, so intend making this fence.
track on opposite side will make it very stable since its placed longer side of the table and fence is pretty long and rather lightly constructed.
am, but is it ok to have wobling other fence end ?
Nice but you can buy the T-track and T-bolts. Can your table saw do angle cuts?
A clean and neat visual tutorial without all the preamble waffle I'm used to hearing on most other sites. Did i miss the handle being put on?
No , That's the only thing left out, I never saw it either !
Buenisimo video una gradisima lecion me a encantado gracias por estos videos tan buenos. Un saludo desde Asturias, España
For me it's great. I am from Poland with us all too much complicated projects
S
Albine
muy buena idea
Vrlo jednostavno ali odlicno prikazano Zasluzuje svaku pohvalu.
este señor lo considero mi maestro .y le doy muchas gracias
SIMPLE, NICE, EASY, AND ACCURATE....MOST IMPORTANTLY COST IS CHEAP
What were the pupose of the t bolts if the middle carriage bolt was the porviding the locking action? Great job.
very nice job
Nice tablesaw 👍 what's the name of bolt you're using for slide ?
guys cut a bigger hole out for saw then your safety guard will pop up on your table if using a plundge saw 😃💪👍
It is the best method, good on you
good, thanks you
where did you buy the aluminum tubing and what dimensions? also your bolts are 5/16?
Thank you so much for your so nice show !
Ficou um espetáculo muito bom mesmo brigadão VALEU
The most practical and simple saw fence
Thx man this is what i was needed ;)
Did You use a special saw blade for aluminium, or standard for wood for cutting the grove?
Nice job
bonjour
simple et efficace, bravo
Really well done! :)
Great Video, but one question please . When inserting T nuts, to holes, Why not do T nut recess first after drilling, rather than in the piece without the T nut, just makes sense to me ! Just asking. ???
If you're using T-nuts more or less often, it's worth to buy a counter-bore drill bit to drill the hole and recess for the t-nut in one go. Trend for example has them for 6 and 8 mm t-nuts. I love those drill bits... :)
Awesome...100% 👍👍👍🍻
Hello Friend. good video and beautiful circular saw table. what is the name of the part you used to make the cutting guide. the one that is fixed to the side of the table.
really easy to understand thank you a very good job
super !!!!
ottima soluzione.. bravo
Muito bacana ficou excelente seu projeto guia de Serra de bancada foi uma ótima apresentação e muito boa à demonstração valeu obrigadao
Спасибо✌
Hi there, does your saw fence stay straight even at the end? It's a very long fence and i've seen guy's make shorter ones and complain that they moved left to right at the end ...you have the same problem?
Excellent video! Well done!
Really nice work there
what are the dimensions of your table top and the rough placement of the saw on it? (I've seen the other videos)
Perfect, Show 👏👏🇧🇷
Thanks I will try to make my
Excelent!
You have to apply the five cut method to test the correctness.... right?
Awesome job, does this fence hold sturdy for heavy ripping?
that's what i'm concerned too
Seems like you could clamp the far end of the fence down ...or just screw it to the deck.
motoman22atgmail You could add another aluminium rail on the far end, attach a small toggle clamp that slides and it will hold end tight enough.🇬🇧
so gooood, thanks you
*انت رائع يا عزيزي تحياتي من مصر*
Perfect tip
Сэр, может я ошибаюсь, но мне кажется, что вы мой соотечественник и я безумно рад за вашу смекалку, что вы ведёте канал на не родном для вас языке, оно и понятно почему! Надеюсь, что я не ошибаюсь, т.е. делаю выводы по знакомому мне акценту и произношению "р"!)
Собственно хотел вам предложить приделать линейку сбоку и пусть это будет ещё одной идеей для нового отличного видео! =) Пока ещё не посмотрел всех видео, может быть идея уже была воплощена! Подписался! Искренне желаю успехов и развития!
Very simple, but effective
Hi very good video I have a table saw but the fence is not that good so I will make yours well ill give it a go well done its nice to share and help each other
A mi place mult , toate vizionate , mulțumesc mult o zi buna
Simple and smart...very nice
Perfect work .. i can make the same system using aluminum .. it will be like a factory work
I like you adaptation of t track and slot screws
So middle bolt head will clamp in against with front wall rail? Thanks Sir
Great video, great solution. Can’t believe you got so many thumbs down.
Thanks you
Very nice design 🎉
What is the type of saw blade you used to rip the aluminium?......thank you
how do you adjust the height of the saw?
Thank you so much!
You give me an insight to improve my table saw fence!
You prolly dont care at all but does someone know a trick to get back into an Instagram account..?
I somehow forgot the account password. I would love any tricks you can offer me.
@Jameson London Instablaster ;)
@Gus Jaxtyn Thanks so much for your reply. I got to the site through google and I'm trying it out atm.
I see it takes quite some time so I will get back to you later when my account password hopefully is recovered.
@Gus Jaxtyn It did the trick and I finally got access to my account again. I am so happy!
Thank you so much, you saved my account !
@Jameson London no problem :)
excellent job
please tell us about all the wooden peace dimentions ....
Excelente, los videos con respecto a la armada de los diferentes accesorios que uno necesita para la realización de trabajos de manualidades o labores de ebanisteria. El único problema que veo es que soy colombiano y no tengo conocimientos de inglés.
Sería bueno que se tradujeran al español.
Esa es mi inquietud
, de resto muy buenos felicitaciones y muchas gracias
Отлично! Просто и быстро! Удачи!
How do you adjust the blade height?
3:52 from this point on forward you can see the fence wiggle on the top side. I would do what you first did on the other side as well to keep it more intact.
maybe not. it jiggles when he moves the fence, not when its fastened. the only play will be in the elbow at the near end. i suggest bulking up the area where the slide joins the fence.
How was the blade rigged? Is that a circular saw turned upside down? And how did you rig the on/off switch? Nice video, thanks
see his homemade tablesaw video yup it is a circular saw and a powerstrip with a on/off switch
Great job,
Great as always, thanks for sharing
How do you cut the alluminum without the fence we are currently making to make the cut straight??
very interesting and a cheap way to make saw fance
بہترین ورک
عمل ممتاز عاشت ايدك
Cool design..
Well done..👍🏽