What would you recommend for iso? My current thoughts after what you've said is 3.2 second exposure F2.0 iso 800-1000 5 second interval total time around 40 minutes for a 20 second timelaps?
You don't know what settings you need until you actually get out there and start shooting. I don't think I've ever taken an Aurora shot with less than a 6 second exposure. But others have. ISO can be 400 or 4000. So Start at 6 second shutter, your widest aperture and 1000 ISO, and the quickest interval your camera can handle. 1-3 seconds max. Not 5. .... then adjust from there. If it's fast moving Aurora you may need to have a faster shutter, like 3 seconds. If it's a horizon glow aurora then you can easily use a 10-15 second exposure. Again. It all depends. It's like asking somebody how to score a point in basketball, there's like 10 different methods. Layup, dunk, 3 pointer, free throw, fadeaway etc. Just know how to operate your camera and you'll figure it out.
If I shoot at 5 seconds exposure, with 7 seconds interval (as interval should be slightly above SS) and 2 seconds delay, How long will I need to shoot for 24fps to get a time lapse of 10 to 15 seconds?? I’ll be using f2.8/1600-2500 iso depending on the lights and shutter speed of 5 seconds. Can you suggest the time please? Also is the delay required ?I’m a bit confused but these are the settings I’ll use. Thanks again.
It should start counting the delay AFTER the picture is completed. I think. So you would get one photo every 12 seconds or five photos every minute. So it would take you almost five minutes to get one second of video and a full hour to get you 12 seconds of video.
At 3:45 you mention 2 second exposure every 2 seconds, 5 second exposure every 5 seconds etc.. For the 5 second example, do you mean an interval time of 5 seconds of no shooting between 5 second shots? or earlier you said .5 seconds between 5 second shots. Just trying to get a better understanding of the correct buffer time to set.
The overall goal is to collect light at all times! Weaker/slower moving aurora will require longer exposure times, while faster moving/brighter aurora work better in timelapses if you have a little shorter of an exposure time. In any case, it's best to match the interval to the exposure time. On Canon you can cheat a little by just using the continuous shutter mode and a remote trigger. Set your exposoure to 5 second, and then lock the remote down, you get your 5 every 5 or 10 every 10 etc without putting any thought into the interval!
Discord? discord.gg/bNMVrjf Patreon? www.patreon.com/scienceoutthere Twitter? twitter.com/ScienceOutThere
What would you recommend for iso?
My current thoughts after what you've said is
3.2 second exposure F2.0 iso 800-1000
5 second interval total time around 40 minutes for a 20 second timelaps?
You don't know what settings you need until you actually get out there and start shooting. I don't think I've ever taken an Aurora shot with less than a 6 second exposure. But others have. ISO can be 400 or 4000. So Start at 6 second shutter, your widest aperture and 1000 ISO, and the quickest interval your camera can handle. 1-3 seconds max. Not 5. .... then adjust from there. If it's fast moving Aurora you may need to have a faster shutter, like 3 seconds. If it's a horizon glow aurora then you can easily use a 10-15 second exposure. Again. It all depends. It's like asking somebody how to score a point in basketball, there's like 10 different methods. Layup, dunk, 3 pointer, free throw, fadeaway etc. Just know how to operate your camera and you'll figure it out.
In the S&Q settings, Rec frames at 24 and frame rate at 60fps?
Great
If I shoot at 5 seconds exposure, with 7 seconds interval (as interval should be slightly above SS) and 2 seconds delay, How long will I need to shoot for 24fps to get a time lapse of 10 to 15 seconds?? I’ll be using f2.8/1600-2500 iso depending on the lights and shutter speed of 5 seconds. Can you suggest the time please? Also is the delay required ?I’m a bit confused but these are the settings I’ll use. Thanks again.
It should start counting the delay AFTER the picture is completed. I think. So you would get one photo every 12 seconds or five photos every minute. So it would take you almost five minutes to get one second of video and a full hour to get you 12 seconds of video.
At 3:45 you mention 2 second exposure every 2 seconds, 5 second exposure every 5 seconds etc.. For the 5 second example, do you mean an interval time of 5 seconds of no shooting between 5 second shots? or earlier you said .5 seconds between 5 second shots. Just trying to get a better understanding of the correct buffer time to set.
The overall goal is to collect light at all times! Weaker/slower moving aurora will require longer exposure times, while faster moving/brighter aurora work better in timelapses if you have a little shorter of an exposure time. In any case, it's best to match the interval to the exposure time. On Canon you can cheat a little by just using the continuous shutter mode and a remote trigger. Set your exposoure to 5 second, and then lock the remote down, you get your 5 every 5 or 10 every 10 etc without putting any thought into the interval!
@@scienceoutthere ok thanks for the reply!
i have an iphone 14 pro max, how can i do it?
make a star timelapse. Tonight is a perfect day for northern light. So i hope you see this messege today
@@fibiger12thank youuuu