Hello. I bought a panel with your Huidu hd-w00 controller. The panel worked perfectly, but after about 10 starts it stopped working. The red "Power" light on the controller is on, but the "Run" light is not. What could be the problem? Thank you
In the LED display, the ratio of the number of lines lit at the same time to the number of lines in the entire area is called scanning mode. The scan is also divided into 1/2 scan, 1/4 scan, 1/8 scan, 1/16 scan and other driving methods. That is to say, the drive mode of the display screen is different, so the settings of the controllers are also different. If the controller was originally used on the 1/4 scanning screen, but now it is used on the static screen, the display on the display screen will be lit every 4 lines. Generally, different scan mode of LED display, the controller settings will be different. After connecting the control card, display screen, computer and other main components, you can enter the Huidu software on the computer or APP to set by smart settings. let me also teach you details of the scanning mode and principle of the LED display. 1. LED display scanning method: Classification of LED display scanning methods: Scanning mode means that in one single LED module, the ratio of the number of lines lit at the same time to the number of lines in the entire area. (1). Static scanning: Static scanning is to implement "point-to-point" control from the output of the driver IC to the pixels. Static scanning does not require control circuits, and the cost is higher than dynamic scanning, but the display effect is good, stability is good, and brightness is lost. The advantages of being smaller, etc. (2). Dynamic scanning: Dynamic scanning is to implement "point-to-column" control from the output of the driver IC to the pixel points. Dynamic scanning requires a control circuit, and the cost is lower than that of static scanning, but the display effect is poor and the brightness loss is large. .
2. Classification by model: (1). Scanning mode of indoor full-color LED display: P2.5, P3, P4, P5 are constant current 1/32 or 1/16 scan, P6, P7.62 are constant current 1/8 scan. (2). Scanning mode of outdoor full-color LED display: P8, P10, P12 are constant current 1/2 or 1/4 scan, P16, P20, P25 are static scan. (3). The scanning mode of single and double color LED display screen is mainly constant current 1/4 scan, constant current 1/8 scan, and constant current 1/16 scan.
1/4 scan: Under the same other conditions, the 1/4 scan display is only half the brightness of the 1/2 scan display, which is suitable for semi-outdoors and indoors. The control method is to increase from 1/2 of two LEDs to 4 LEDs. The current is swept across the 4 LEDs. 1/8 scan, 1/16 scan: These are driving methods with lower brightness, and are generally only used indoors. They are controlled in the same way. 🙏🙏
W0 control range is 32x320 pixels, that means that if your P10 module is 16x32 pixels, it can max can support 20 boards. when any requirements, also welcome consult wechat and whatsapp: +8613510540791, you can be had answer in time there.
Hi, iam programming hd-w00 controller prayer program using HD2020 . Its mention about prayer audio module that can play mp3? Where to upload the mp3 and where is the loudspeaker output? Thanks
Hello, I am using Huidu W00 wifi controller...How to update its firmware using the mobile app ? I am unable to update its firmware using mobile ...need your help
hello, first need download newest firmware in the mobile APP ledart, then connect the controller wifi by mobile and run ledart, you will very easily find the option of "firmware update" in the APP interface, then just click it and choose firmware to update. You also can message us on WA: +8613510540791 ,we will show you screenshot instruction.
Hello, please help, there are 10 scoreboards of the same, how can I send all the files at once with one button, without manually attaching to each scoreboard. Because when you change the speed voltage, you need to change the settings file for each scoreboard 10 times, connect to the Wi-Fi board 10 times and send the file 10 times. I use the hd2020 program
yes, in setting, you can switch language to English. When any requirements, also welcome contact HUIDU wechat and whatsapp: +8613510540791 directly, you can get respond there quickly.
W00 doesn't have button input function. Had better use W6x series card, such as W60, W62..., they support to add button on board, this is tutorial details 👉th-cam.com/video/f0xOz4laQqQ/w-d-xo.html
@@HuiduController worship times or worship schedules on the HD2020 / HD2018 PC application like this video, in the 8.47 minute section. My city doesn't exist, and I can't find it even though I update the HUIDU app th-cam.com/video/Q4seWCtoKM8/w-d-xo.html
@@HuiduController ок. спасибо! столкнулся с проблемой калибровки на контролерах HD-WF2, не получается откалибровать для модуля P8 3535 320Х160 5S YSV1.0., хотя с контролером BX-6Q1 без проблем калибровалось, в чем может быть проблема?
Reset up steps: 1) Disconnect the power of the controller first; 2) Then press and hold the S1 test button on the control card and do not release it; 3) After the display is powered on, wait for about 10 seconds, if the running light flash fast, then release the test button. When the firmware version is above v4.24, there is another method: Under power on, just press and hold the test button for 10 seconds, the password will be restored to 88888888 (this operation will only change the password, won’t reset the screen parameters)
I have exactly this board. But somehow the password is not working. I guess that the former user changed the password. Is there a masterpassword or something like this or an opportunity to reset the password? I really appreciate your help!
Madam Aap English bohot acchi bolte ho. ☺️
Thank you😄
Green p10 module which model to select
How to reset control board
Merci
Peut on commander un compteur
Avec commande manuelle au bouton
Il y a des sortie sur la carte sensore
How to make a daily countdown using the Huidu HD-WF2 Wifi Controller ?
How can a connect my huidu to have two side display
It's wifi is not working so what's it problem
Hi, which card do you use and how is it not working? ? can you tell us details on whatsapp: +8613510540791, we will help you in time.
Hello. I bought a panel with your Huidu hd-w00 controller. The panel worked perfectly, but after about 10 starts it stopped working. The red "Power" light on the controller is on, but the "Run" light is not. What could be the problem? Thank you
please try to reset it up more times, until the running light blinking. Also can contact whatsapp/wechat: +8613510540791
What is 4scan,8scan,16 scan etc.pls explain the process.
In the LED display, the ratio of the number of lines lit at the same time to the number of lines in the entire area is called scanning mode. The scan is also divided into 1/2 scan, 1/4 scan, 1/8 scan, 1/16 scan and other driving methods. That is to say, the drive mode of the display screen is different, so the settings of the controllers are also different. If the controller was originally used on the 1/4 scanning screen, but now it is used on the static screen, the display on the display screen will be lit every 4 lines. Generally, different scan mode of LED display, the controller settings will be different. After connecting the control card, display screen, computer and other main components, you can enter the Huidu software on the computer or APP to set by smart settings. let me also teach you details of the scanning mode and principle of the LED display.
1. LED display scanning method:
Classification of LED display scanning methods:
Scanning mode means that in one single LED module, the ratio of the number of lines lit at the same time to the number of lines in the entire area.
(1). Static scanning: Static scanning is to implement "point-to-point" control from the output of the driver IC to the pixels. Static scanning does not require control circuits, and the cost is higher than dynamic scanning, but the display effect is good, stability is good, and brightness is lost. The advantages of being smaller, etc.
(2). Dynamic scanning: Dynamic scanning is to implement "point-to-column" control from the output of the driver IC to the pixel points. Dynamic scanning requires a control circuit, and the cost is lower than that of static scanning, but the display effect is poor and the brightness loss is large. .
2. Classification by model:
(1). Scanning mode of indoor full-color LED display: P2.5, P3, P4, P5 are constant current 1/32 or 1/16 scan, P6, P7.62 are constant current 1/8 scan.
(2). Scanning mode of outdoor full-color LED display: P8, P10, P12 are constant current 1/2 or 1/4 scan, P16, P20, P25 are static scan.
(3). The scanning mode of single and double color LED display screen is mainly constant current 1/4 scan, constant current 1/8 scan, and constant current 1/16 scan.
1/4 scan: Under the same other conditions, the 1/4 scan display is only half the brightness of the 1/2 scan display, which is suitable for semi-outdoors and indoors. The control method is to increase from 1/2 of two LEDs to 4 LEDs. The current is swept across the 4 LEDs.
1/8 scan, 1/16 scan: These are driving methods with lower brightness, and are generally only used indoors. They are controlled in the same way. 🙏🙏
What would be the max amount of connected p10 boards this would control. Each p10 board and HD-w0 would have 5v regulated power?
yes, use 5V DC power supply.
W0 control range is 32x320 pixels, that means that if your P10 module is 16x32 pixels, it can max can support 20 boards. when any requirements, also welcome consult wechat and whatsapp: +8613510540791, you can be had answer in time there.
Hi, iam programming hd-w00 controller prayer program using HD2020 . Its mention about prayer audio module that can play mp3? Where to upload the mp3 and where is the loudspeaker output? Thanks
hello my friend, W00 can not support prayer audio function, Only E62, E64, W63,
W64 supported.
@@HuiduControllerthanks for the reply
Hello, I am using Huidu W00 wifi controller...How to update its firmware using the mobile app ? I am unable to update its firmware using mobile ...need your help
hello, first need download newest firmware in the mobile APP ledart, then connect the controller wifi by mobile and run ledart, you will very easily find the option of "firmware update" in the APP interface, then just click it and choose firmware to update. You also can message us on WA: +8613510540791 ,we will show you screenshot instruction.
Hi, thanks for the reply... I will do it asap... Thanks for the fast response 🙏🙏🙏
How to adjust time for p10 clock with W.series controller single colour ?
can do time correction on mobile APP "ledart" or PC software "HDSign"
Hello, please help, there are 10 scoreboards of the same, how can I send all the files at once with one button, without manually attaching to each scoreboard. Because when you change the speed voltage, you need to change the settings file for each scoreboard 10 times, connect to the Wi-Fi board 10 times and send the file 10 times. I use the hd2020 program
For in time support, welcome contact whatsapp/wechat: +8613510540791
12v power supply shorts the board?
Hi, the power supply for controller and module is 5V.
How to make adjustable digital clock used the w00 how to use the adjustable switches This controller with RTC?
The digital clock can be adjustable by software HD2020, but can not support adjust with switches.
@@HuiduController okay
How to use this card for countdown
you can use mobile APP LedArt for setting countdown
I brought a w00 controller it S2 switch connection onlythare and j13 and j15 how to control switching
W00 doesn't support S2 button function
Which wifi controller will work with p6 or p3 full rgb
HD-WF1, WF2, WF4, D16, D36, C16C, C36C all can work
i need control card use for run 30meter Smd whit 1/4scan
is it single color or full color smd?
@@HuiduController single color
؟؟؟
@@Elhendawee1 one modules high, and 30 meters long, right? if yes, it can use our wifi card W64A.
@@Elhendawee1 welcome contact our whatsapp or wechat: +8613510540791
W00 controller program 1 run but program 2 can't run ????
please check program settings. Any question, please consult WhatsApp: +8613510540791
Dear sir,
With this controller (W00 or W03) is can display the time and calender?
Hi dear, yes our Huidu all controllers can display the time and calender.
helooo Huidu,,I have a huidu w00 controller, there are pins P1. can you explain the function of the pin,,thankyu
P1 is empty, no function
hello, please can you help me. how to change language on mobile app (its chinesse) need english display
yes, in setting, you can switch language to English. When any requirements, also welcome contact HUIDU wechat and whatsapp: +8613510540791 directly, you can get respond there quickly.
I am using 3 P0 10 panels but only 2 scroll
thank you so much. I mean this very nice
Thank you, we will keep updating more tutorials
Is it possible to make a counter display with W00 V7.0.2 ? How ? i have tried with digit function but cant find any input on board
W00 doesn't have button input function. Had better use W6x series card, such as W60, W62..., they support to add button on board, this is tutorial details 👉th-cam.com/video/f0xOz4laQqQ/w-d-xo.html
Hi, Need a help from you for a problem regarding P10 RGB Module. Font color Red on App, but appearing Blue on display, pl suggest how to solve.
Hi my friend, which controller do you use? let me help you
HOW MUCH Amperage POWER SUPPLY IS REQUIRED ???
Output 5V, 40A or 5V, 60A is the most popular power supply in the market usually
Actually we are only manufacturer of LED controller, welcome contact us on Whatsapp: +8613510540791
Untuk 4 p10 berpa amper dipergunakan
@@salfiiyan4501 it is enough to use one power supply with 5V 40A or 60A.
What can I do if I can't connect to the Wi-Fi because it doesn't appear?😢
Is the running light on the card blinking?
how to add temperature sensor ?
there is port hole which marked P5 for connecting temp, please find it on the board.
@@HuiduController ok
@@Yogabpaudio When any need, welcome contact us on whatsapp and wechat: +8613510540791
how to add city in my country in worship schedule on PC? I'm having trouble because the format is .PTD file
Hi my friend, you mean pray function?
@@HuiduController worship times or worship schedules on the HD2020 / HD2018 PC application like this video, in the 8.47 minute section. My city doesn't exist, and I can't find it even though I update the HUIDU app
th-cam.com/video/Q4seWCtoKM8/w-d-xo.html
@@armantape You can click edit and modify the city name by yourself, can you message to whatsapp: +8613510540791, we can teach you by screenshot.🙂
@@HuiduController ok thanks for information 🙏 good luck for you
@@armantape Thanks, can you please subscribe our this TH-cam channel, we will keep update more tutorials?
how to double-sided with the HD W00 using four P10 panels
Just connect them as one screen, then set two area for each side.
@@HuiduController Thank you
I will try it
@@pakcheret885 you're welcome, when any help, welcome contact whatsapp: +8613510540791
Initially there were no issues, but now lot of issues in control cards of new lot
Please give details feedback to WA:+8613510540791
Thank you 🙏
welcome friend
Very nice 👌
Thank you! Cheers!
Any help, welcome contact us on Whatsapp or wechat : +8613510540791 .
I use hd2018 .but thehd2020 is not available in 3DTEXT. why
If need 3D text, please just continue to use HD2018, because HD2020 is made some simplifications.
@@HuiduController Thank you
Wifi controller not showing wifi single
can you show us a short video of the card working status on Whatsapp? let us help to check. Whatsapp: +8613510540791
Hi i am venkatraman from india .
How to send the program of HD2018 IN PC To send the mobil phone LED ART
you can send program in mobile APP LedArt directly
Bagaimana cara merubah ke bahasa Indonesia?
example : Friday --> Jum'at
yes, our software interface language can be set to Indonesian. Any question, please contact whatsapp: +8613510540791
@@HuiduController Terima kasih.
Nice video
Thanks
Msg can't display on p10 board
single color or full color?
I want to connect to w04 Module and it says wrong password please help me
App name?
LedArt
Any questions, welcome consult WA: +8613510540791
Thanks....
thanks bro
зачем там разъем Р1 ?
It is empty, no any functions.
@@HuiduController ок. спасибо! столкнулся с проблемой калибровки на контролерах HD-WF2, не получается откалибровать для модуля P8 3535 320Х160 5S YSV1.0., хотя с контролером BX-6Q1 без проблем калибровалось, в чем может быть проблема?
Blank problem kaise solve kare
For in time support, welcome contact whatsapp/wechat: +8613510540791
👌👌👌
🥰🥰
Okey sir but program not readback sir
because of W00 IC limited, it is unable to support function of readback.
Price mem
pls message us on WA: +8613510540791
Super
😀
super
thanks, let's keep moving
❤
How to change password & Card name ?
you can change the wifi password in wifi setting in mobile APP "LedArt"
@@HuiduController ok.... But how to do pls kindly tell me in which option we can change the pw & Card name ?
@@SpectrumTechnologies Ok, please check whatsapp, I sent you screenshot
@@HuiduController not received yet
@@SpectrumTechnologies please message me on WA: +8613510540791
Default password is wrong
How to solve this problem
reset up the card
Welcome
How to reset HD -w01. Single colour. Forgot password. Please tell to me. And any videos Link.
How to reset wifi password
Reset up steps:
1) Disconnect the power of the controller first;
2) Then press and hold the S1 test button on the control card and do not release it;
3) After the display is powered on, wait for about 10 seconds, if the running light flash fast, then release the test button.
When the firmware version is above v4.24, there is another method:
Under power on, just press and hold the test button for 10 seconds, the password will be restored to 88888888
(this operation will only change the password,
won’t reset the screen parameters)
Ok
welcome subscribe, we will update more tutorial😁
teu ngarti bahasana neng duh, coba atuh ku bahasa jawa pasti ngarti kula
teu ngarti bahasana neng kula mah,
I have exactly this board. But somehow the password is not working. I guess that the former user changed the password. Is there a masterpassword or something like this or an opportunity to reset the password? I really appreciate your help!
I found already in an older comment the solution. I will try it :) thanks anyway!
@@snakebros9012 👍 Ok, good!