Thank you for this detailed tutorial. I Spent time and resources last year because of this problem. And it just happened tonight and I was able to unfreeze it following your tutorial. Thank you. 😊
Haa you really save me from disgrace this means alot after severall call to engineer 2000 workmanship 500 for tfare not until now i watch your video and i was able to achieve it you are blessed sir
Omo, baba you just saved me bro, was just sewing all of a sudden the machine froze, thank God and thank you for the help🙏🏾🙏🏾. I think say ma machine done knock😅😅
Thank you dear brother. I sincerely appreciate. I literally followed you step by step and now my machine is free. Just that it isn't catching thread. God reward you handsomely bro
Many thanks for this stress and money saving video I have been waiting for my machine mechanic for two weeks now to come and fix this for me. With the video now I and my son can fix it. God bless you really good.
Thanks for sharing this knowledge. My machine locked as I was sewing and I didn't want the stress of looking for a repairer. As I followed step by step of what you are doing on the video. the machine started rolling again but the thread is still tight, I hope it will fall out on it's own. I really appreciate your saving me time and money too.👍👏
Thank you, its very helpful. Is just that, once you loose the main screw, you may need to reset the timing between the needle and the hook. if not the needle will stuck or break.
Thank you so much for this video but I wish I found your video before I decided to try it on my own. Now my needle keeps jamming with the stopper and where the bobbin case stays because I removed all of them, and I can’t seem to figure out what to do. Please help 🙏🏼
Thanks for this video. Please i couldn't get the bobbin case rolling continuously... what do i do to rectify this, thanks as I anticipate a helpful response
Happy sunday.you are doing an amazing work. I learnt a lot when I was fixing my weaving machine. But I have a challenge . I mistakingly pulled the presser foot lifting handle too high. How can I fix it back
Hello thank you so much for this. I had this same issue and got it fixed by a repairer but over time the machine doesn't see any stretching fabric again regardless of the needle type. Please what can I do to fix this
It is new machine, and it was freezed. I have watched the video till the end and I am stucked while applying your teachings. I have loosen the 3 tiny screw, yet the machine is not rolling 360 degrees I don't know what to do next because no thread is hidden in the bubin case for me to remove. Kindly guide me through, thanks
My machine is new, and the hand wheel is not moving too, when I press the treadle the clutch motor will drop and once I take my feet off it will pick up again.
This is just amazing!!! Thank you so much!!! Please, sir, these parts you loosed in your video are rust in mine. Since then, the machine has always gotten stuck if I don't use it for some days. Please, what can I do to resolve this issue paymently
Thanks,,pls when am backstitching my emel sewing machine,the thread usually cut.but if am to sew without back stitches,it will not cut.what is the problem? and how can I fix it
Sir I did all this except for those three screws because it is too tight. It didn't loosen. But the machine was moving then when I placed back the bobbin case it didn't work again. It was affecting that big screen we remove above the bobbin case.
I am currently at my machine trying to fix this problem, I have loosened the first big screw but that silver attachment is so hard to pull, and now I cannot proceed to loosen the smaller screws. 🤦♀️
Please I have an issue my hand lifter for the foot is moving up and down but it's not going far up like it's surpose to like a fabric can't pass through it with out me forcing it Please I need help!!!
Hi I don’t know if this is same as what happened to my machine, but my handle froze and when I called a repairer he asked whether my needle got broken and I told him yes. He promised to come and have a look but it’s been a week now I checked on TH-cam if I can find solution to it. Please help
Please sir I have auto direct drive machine I was pressing the button to adjust my speed and the machine start running on it’s own and i off and on again then it can’t move since then
I don't know how to thank you sir Aluko, I later got longer screw driver and was able to unscrew the screw, my machine is working perfectly now, may God bless you beton your imagination. Thanks so much sir
This tutorial just saved me after so many weeks that I couldn't use my machine. God bless you 🙏🏻
Words can’t describe how grateful I am for this video. Just fixed mine I’ve been paying 5k everytime this happens 😭
Please share to others
Baba u have saved 155.000 people with just This ur tutorial
Thank you for this detailed tutorial. I Spent time and resources last year because of this problem. And it just happened tonight and I was able to unfreeze it following your tutorial. Thank you. 😊
This is just amazing!!! Thank you so much brother . Very educating and helpful video. God bless you abundantly.
Haa you really save me from disgrace this means alot after severall call to engineer 2000 workmanship 500 for tfare not until now i watch your video and i was able to achieve it you are blessed sir
Please do share and subscribe
Thanks so much for this wonderful tutorial.... It's so much helpful.... You're the best
Omo, baba you just saved me bro, was just sewing all of a sudden the machine froze, thank God and thank you for the help🙏🏾🙏🏾. I think say ma machine done knock😅😅
Thank you dear brother. I sincerely appreciate. I literally followed you step by step and now my machine is free. Just that it isn't catching thread. God reward you handsomely bro
Massage me in WhatsApp please
@@alukosewingmachines3782hello please after everything I hear some small noise when sewing so please what should I do
Thank you very much too ❤
Please message me on WhatsApp
I need to know how it sound
Thank you for this tutorial, but I have an issue raising my machine up
@ElegbedeBukola okay
God bless you, I have watched several videos to no avail, I didn't even finish watching your tutorial and my machine is working fine now. Thank you
Wonderful!
U are a life saver,just followed ur instructions and boom!!it unfrozen.thank u so much
You are the best
A life saver
Thank you uuu💛
You are a life saver!!!. Thank you soooo much for this.
Many thanks for this stress and money saving video I have been waiting for my machine mechanic for two weeks now to come and fix this for me. With the video now I and my son can fix it. God bless you really good.
Amen thank you ma. Please do share like and subscribe
God bless you brother 🙏🏿
Thank you very much.
I actually paid 7k to fix this the last time.
Thank you for this video.
I just unlocked my machin myself.
Wow. God is great. Ensure you share and subscribe
I spent exact same December last year excluding transport fare. This tutorial just saved me similar stress tonight. 😊
U just saved me my brother. Thank you very much.
God bless you sir. Thank you very much
Thank you ..🎉you made my day ...god bless you
Thanks for your message
God bless you sir… my Machine is back…loosing nuts was difficult though.
Thanks for this video, it made life easy!
Thank you so much. I am so grateful
God bless you for this ❤
Amen
Thanks so much my friend, it was very helpful and it worked for me
❤❤thanks so much Sir God bless you for me
Amen
It was really helpful, thanks alot
Thanks a million times
Thanks for the tutorial, it really save me today.
Wow. Ensure you subscribe and share with friends
Thanks for sharing this knowledge. My machine locked as I was sewing and I didn't want the stress of looking for a repairer. As I followed step by step of what you are doing on the video. the machine started rolling again but the thread is still tight, I hope it will fall out on it's own.
I really appreciate your saving me time and money too.👍👏
Pls how did you fix the issue of it hitting something? I'm there at the moment. Pls help me
Thank you, its very helpful. Is just that, once you loose the main screw, you may need to reset the timing between the needle and the hook. if not the needle will stuck or break.
That why I make emphasizes on it. That done touch what I didn’t touch
Thank you
It works . Thank you 💃💃💃
Thank you very much for this..really Helpful
Thank you so much👌, you just came to my rescue🙏.
thank you bro.... very helpful video.. India
Thank you so much for this video but I wish I found your video before I decided to try it on my own.
Now my needle keeps jamming with the stopper and where the bobbin case stays because I removed all of them, and I can’t seem to figure out what to do.
Please help 🙏🏼
Message me on WhatsApp
I missed the last step
@@alukosewingmachines3782 I need help in my sewing machine
Thank you so much, this video really helped me out today
Amen
Thank you sir . I’m learning as a hobbyist
It was really helpful, thanks
Thanks for the video, I've not seen a naija video on TH-cam and be able to trust but i had a problem loosing the three screws
Chai😁, the same problem I'm having since yesterday that I've watched this.
Thanks for this video. Please i couldn't get the bobbin case rolling continuously... what do i do to rectify this, thanks as I anticipate a helpful response
I can’t get you right but please ensure you finish the procedures
Wow, thanks for the video, I’ve loosened the first screw, however the machine is not still rolling to remove the screw that comes with the riller
WhatsApp 08174520114
Thank you, but after loosing the first screw my machine is not moving so it’s making it hard to lose the next 3 screws
Thank you sir 🙏
Happy sunday.you are doing an amazing work. I learnt a lot when I was fixing my weaving machine. But I have a challenge . I mistakingly pulled the presser foot lifting handle too high. How can I fix it back
Send the pictures to me. Because their are many ways to it depending on the fault.
WhatsApp 08174520114
Hello thank you so much for this.
I had this same issue and got it fixed by a repairer but over time the machine doesn't see any stretching fabric again regardless of the needle type. Please what can I do to fix this
Same machine emel
Whatsapp 08174520114
Let do video call to rectify it
Thank you so much God bless you
You've really safe me today 🙏
Amen
Thank you for this
I am finding it hard to loose the screw after raising the head of the machine up,i.e the one before the bobbin case,please what can I do?
It is new machine, and it was freezed.
I have watched the video till the end and I am stucked while applying your teachings.
I have loosen the 3 tiny screw, yet the machine is not rolling 360 degrees
I don't know what to do next because no thread is hidden in the bubin case for me to remove.
Kindly guide me through, thanks
I’m sorry for late reply please call me on video call WhatsApp
My machine is new, and the hand wheel is not moving too, when I press the treadle the clutch motor will drop and once I take my feet off it will pick up again.
Pls where can I get the screw 🪛 you used to loose the 3 nots
Yes you can. At anywhere they sell sewing machines
Thank you very much
Does this work on all machines or only emel? Please help I'm in this situation right now and my machine is hudong
Yes it does
O thank you so much
This is just amazing!!! Thank you so much!!! Please, sir, these parts you loosed in your video are rust in mine. Since then, the machine has always gotten stuck if I don't use it for some days. Please, what can I do to resolve this issue paymently
Please send it to my WhatsApp 08174520114
Please, how can this be done in Post Bed sewing machine?
The settings is different please message me on WhatsApp
Thanks,,pls when am backstitching my emel sewing machine,the thread usually cut.but if am to sew without back stitches,it will not cut.what is the problem? and how can I fix it
Loose the thread tension a bit
thank you a bunch. you just saved me
Glad I could help!
My God will surely bless you
Very amazing
Thank you! Cheers!
Thanks for sharing. This was really helpful to me
Sir I did all this except for those three screws because it is too tight. It didn't loosen. But the machine was moving then when I placed back the bobbin case it didn't work again. It was affecting that big screen we remove above the bobbin case.
Ma.
You will have to loose those small screws and finish the process
@@alukosewingmachines3782 ok Sir 🙏🏿
I am currently at my machine trying to fix this problem, I have loosened the first big screw but that silver attachment is so hard to pull, and now I cannot proceed to loosen the smaller screws. 🤦♀️
Sorry 😣 please WhatsApp me
@@alukosewingmachines3782 Thanks soooo much. I eventually figured it out and it saved me 7k.
🥰🥰🥰😊
Thank you bro, your tutorial really helps but please my industrial sewing machine is giving unpleasant sound at the bobbin side
Try and remove your needle and confirm if it’s still making noise
Is there any way you can help me fix it
WhatsApp 08174520114
Oh so it’s the thread inside that makes it jam/freeze?
Yes
Thanks for this video sir
My machine is showing E-01 on the motor what does it mean pls
Product is BUDDYFLY STRAIGHT SEWING MACHINE
WhatsApp please
We will need to have a video call
Please I have an issue my hand lifter for the foot is moving up and down but it's not going far up like it's surpose to like a fabric can't pass through it with out me forcing it
Please I need help!!!
WhatsApp 08174520114
Thank you soo😢😢😢
What if after doing this the needle is still hitting the shuttle carrier
You need to be sure you follow the instructions strictly and then adjust the carrier timing
Pls which part is carrier timer@@alukosewingmachines3782
God bless you sir
May God reward u, thank u so much
Please help me out Sir, my emel industrial sewing machine is sewing backward, how can I correct it?
Tutorial on how to change industrial sewing machine clutch motor direction.
th-cam.com/video/NIUy9AB9UyQ/w-d-xo.html
Check this video
I still can't loosen the 3 nuts......the screwdriver seems too big for them. Help please 🙏
Try and get the small size. It will work easily
Mine didn't work out... The bobbin keeps hooking with needle after turning pls help me out 😭😭😭😭😭😭😭😭😭😭
Start again please
Chat me up on WhatsApp
Thanks for the video.. I tried losing the 3 screws to no avail
🤕. So sorry please get someone with a bit of experience on how to deal with bolt
@@alukosewingmachines3782 thanks I've gotten someone but the bobbin holder is not separating from the outer part, they are still turning together
I was able to follow your instructions and it unfreezed but now my needle is hitting the bobbin case 😢 what can i do
Restart the process and make sure you complete it
Alright sir , can you send your WhatsApp link so we can communicate better please
Thank you sir
Pls what can I do i can't reel thread with my mechine any More
Check my page
Their is a video on that
My bobbin case is stucked in and the handle is broken, I don’t know what to do rn😢
Ha sorry for late reply
Chat my WhatsApp
Thank you for an incredible video!
But I think my tiny screws are too hard to crew out despite using the tiniest screw driver for it idk what to do
You are welcome. Please ensure you subscribe and share
It's the same thing with mine. I can unscrew mine too
Me too, I can't unscrew
Bro, please why thread is too close to the needle and making it difficult for rotary hook to catch thread unless the hook tip touch the needle ?
Hi I don’t know if this is same as what happened to my machine, but my handle froze and when I called a repairer he asked whether my needle got broken and I told him yes. He promised to come and have a look but it’s been a week now I checked on TH-cam if I can find solution to it. Please help
The same process
Check people’s comments.
It the same process
All right, I will.
My apologies for the late response.
Thanks I just managed to sort it out
How did you manage to loosen the first but with ease, I'm still struggling here 😭😭
😒😒 somethings the nut will check out for your endurance level. Get an experienced person that know a little or more on how to loose nuts
Same problem here 😢
I cannot loose mine
I can’t loose my too😢😢😢
Thank you so much....
But what if the nut isn't loosing?
Apply force or get someone who has mechanical experience
@@alukosewingmachines3782 God bless your hands. Thank you
Pls sir how many pulley does Emel industrial machine come with
One
I’m still struggling to looose the second boot
Ha.
Come to my WhatsApp
Please the pulley meant for reeling my machine is fixed and not moving
Check this video out th-cam.com/video/RZeOBkI7dSw/w-d-xo.html
Kindly help me reduce the loud sound on the machine if possible
Sir pls I need ur help,I followed d process ND removed d thread bt is still not moving bt if I remove d blockage is moving perfectly fine
It seems d blockage is stopping it from moving
Please sir I have auto direct drive machine I was pressing the button to adjust my speed and the machine start running on it’s own and i off and on again then it can’t move since then
😳 which brand
I'm unable to unscrew those 3 tiny screw😢😢😢😢😢😢
😂😂😂🤣
As in am still battling with it since afternoon, I don get head ache on top am😢😢😢😢😢😢
I'm stuck like the machine itself
WhatsApp
Chat me up
I don't know how to thank you sir Aluko, I later got longer screw driver and was able to unscrew the screw, my machine is working perfectly now, may God bless you beton your imagination. Thanks so much sir
Thank you so much for this video, it was helpful.
Thank you! It was a broken needle!
Thanks
sir i am having problems returning the stop
e won't move after i put it back
Please message on WhatsApp ASAP
How do I get your WhatsApp number sir
Great. Thank you
Why is it that after I unfolds the machine the carrier started going 360
Complete the procedure please
How pls explain
See the video to the end and do everything instructed. If the machine is not working fine message me on WhatsApp please
See the video to the end and do everything instructed. If the machine is not working fine message me on WhatsApp please
See the video to the end and do everything instructed. If the machine is not working fine message me on WhatsApp please