I took a closer look and see of the 3 wires, 2 bypass the bulb and one goes in and out (serial connection). So I'm a little lost with your explanation - maybe it's a diff design. Why don't the just use 2 wires in a parallel circuit?
The first 1/3 at the opposite end of the plug in a 3=wire string of 50 lights all burned out. Is there something to fix them all at once or does each and everyone need to be replaced. I replaced a bulb at the start of the burn out and one at the very end but neither lit up
What if it's been cut already and you don't know which wire goes to which? Does it matter? All videos show slightly damaged wires, so you know which one goes with which.
Well I didn’t know which ones did at first either, but I just found that there was one wire running separate from 2 other wires running together if that makes sense it’s kinda tricky to explain. Basically I found that single wire ran through the doubles if I remember correctly now and just reconnected them.
@@spensercaldwell3397 ooh okay I have miniatures so it was easy to see bc there was one single/main wire that connected from light to light with tha other 2 wrapped around.. so do the other 2 not matter which connects to which or ?
Man people are rude! I want to know why you were repairing/ re-splicing the wire? Did you see a cut / pinch? How did you find the source of your wire problem? Also a comment re the fuses.. if you have a multimeter, just check continuity of the fuse to confirm if it’s still good. :-)
dear god a whole 5 min just fix it why cant on click on hot to fix it in time line i feel like part of your family and still know nothing about fixing my lights dude......
You could just say you hate women if that’s how you feel instead of leaving passive aggressive comments..: she was asking valid questions to try to help people who are beginners at this stuff. Not stupid
Amazing! simple. You saved Christmas!!! thank you
What if somebody accidentally cut all three wires at the same spot? How do you know which ones to attach to which?
THANK you! Direct, practical, helpful - an early Xmas gift!!! 🤩
How do u put up with her?
What if I cut all three and just run 22 gauge wire .
I took a closer look and see of the 3 wires, 2 bypass the bulb and one goes in and out (serial connection). So I'm a little lost with your explanation - maybe it's a diff design. Why don't the just use 2 wires in a parallel circuit?
What are the wires for???
The first 1/3 at the opposite end of the plug in a 3=wire string of 50 lights all burned out. Is there something to fix them all at once or does each and everyone need to be replaced. I replaced a bulb at the start of the burn out and one at the very end but neither lit up
I have that exact same problem on several strings.
Thanks. I need help trying to make a hanging light decoration
Bye
What if it's been cut already and you don't know which wire goes to which? Does it matter? All videos show slightly damaged wires, so you know which one goes with which.
Well I didn’t know which ones did at first either, but I just found that there was one wire running separate from 2 other wires running together if that makes sense it’s kinda tricky to explain. Basically I found that single wire ran through the doubles if I remember correctly now and just reconnected them.
@@spensercaldwell3397 ooh okay I have miniatures so it was easy to see bc there was one single/main wire that connected from light to light with tha other 2 wrapped around.. so do the other 2 not matter which connects to which or ?
How do I know which of the three wires connects to each other if you cut the set in half by accident?
I need help on my color control switch is not working
Are all he wires hooked up (correctly at that)?
This is good, but the girl's commentary is annoying
Man people are rude! I want to know why you were repairing/ re-splicing the wire? Did you see a cut / pinch? How did you find the source of your wire problem? Also a comment re the fuses.. if you have a multimeter, just check continuity of the fuse to confirm if it’s still good. :-)
Yes they were cut like someone came by at night and just sliced them right down the middle on all of them
dear god a whole 5 min just fix it why cant on click on hot to fix it in time line i feel like part of your family and still know nothing about fixing my lights dude......
Feel for ya bra!
Step one for fixing lights!!!! Troubleshoot them all by yourself!!!!!
It might have been a simple explanation but I couldn't listen to it. Would suggest leaving cord plugged in and attach to woman with stupid questions
Yeah it was my first video I was nervous
Val is an ahole !....your wife/girlfriend's questions were filling in the blanks you were assuming and leaving unsaid for "know nothing" viewers ! ♥️🎅
You could just say you hate women if that’s how you feel instead of leaving passive aggressive comments..: she was asking valid questions to try to help people who are beginners at this stuff. Not stupid
yeah... ”.....if so.... where can you buy now?” What a stupid question 😂 Useless stupid question
ask for help at Home Depot? good luck with that
I know right. They’ll hire anyone except a felon that actually knows what he’s doing & talking about.
She completely ruined this video...lol
I know and it was my first video I get anxiety 😂
You did not ruin the video.... Screw that guy..@@spensercaldwell3397
Dude, lose the woman, her comments are anoying.
She’s trying to help any other ladies with silly questions
Sorry bro this is a bad explanation and video. Re-do
Holy shit.... a woman is mansplaining this.....
Rambling nonsense.
Dude…stop talking and show the actual splicing. Omg
shush karen