Thanks for the video. I have the priest 2 with three barrels including the .22 long range barrel for the JSB monster pellets. Will these barrels work in the P3 also? Also, my bottle leaks air when filling when fully tightened or loose. This began after a flight across America. Is this an o-ring issue? Thanks
Depends on the caliber, .22 I would go with JSB monster redesigned and slug about 25 grain .218 size, for .25 JSB Kind Heavy and slug about 35 grain in .250 size.
Hi Gregor does this have the 1 in 32 twist lr barrel? On the Rti website it says the prophet 2 has a 1 in 16 twist RPB barrel? Really like the look of the p3. Looking for something to shoot light slugs and heavy pellets. Thanks
All new RTI guns in .22 and .25 cal have RPB barrel with fast twist (close to 1/16") and they are designed to be used for slugs as well as pellets. RTI was offering the .22 cal 1/32 barrel barrel that was designed specifically for pellets (and is till this day in my opinion one of the best barrels for shooting pellets at high velocities), but I don't think they are anymore because of lack of interest. Everyone wants to shoot slugs now :). That barrel was called 5,5 long range (had engraved 5,5LR). RPB is just as accurate with pellet as it was 5,5LR, you just need to be careful not to have too high velocity (typically under 900 fps but it depends on the pellet). The 5,5LR can hand 100 + yards MOA accuracy with JSB Monster redesigns at 1050 fps!
Thanks Gregor. Do you think the p3 is more efficient than the original prophet with the steamer valve. The prophet one in some reviews gave 90 shots over 50ft lb. Will the assisted valve do more? Thanks
There is no point for additional plenum on P-3 as it already has more than enough volume for all calibres. Maybe if they release 9mm but even with 9mm, I got about 900 fps with JSB pellets.
Standard twist for airguns is about 1/17" (+-). That is a relative fast twist for pellets. The LR barrel has 1/32" twist. This twist is excellent for pellets (you can shoot pellets up to or even over 1000 fps and still retain pellet stability) but it is not good for slugs... Since there is all the rage about slugs now, they had to move to something that shoots both well even it it means that it shoot both slightly worse than a dedicated barrel would. This resulted in our development (RTI and I) of the RPB barrel. This barrel will shoot pellets just as accurately, but you cannot shoot them at that high velocity (if you still want accuracy)... You can check my other videos for more in depth explanation.
Not too bad, RTI have Finally started delivering a rifle worthy of the price they charge. BTW, Still waiting on your video showing detailed parts and function of the balanced valve...
@@gregorkamensek3923 Excellent! I'm actually counting the days to see your video. Very excited, Gregor. I'm sure it will be detailed with excellent resolution video 🙂
@@redgum1340 Thanks. Resolution will be high, that is for sure as I am kind of camera gear nerd :) I wish that I could put out videos faster, but it is a lottery when I am able to go and record with day job and crazy rainy weather this year...
@@gregorkamensek3923 Yes Gregor, I know you love camera gear, that's why I knew it would have great resolution. You always do a very good job with your videos. Indeed, the weather has gone mad and it will only only get worse. The greed of man has just about ruined this planet and our children will suffer badly. The world, as we know it, is in its last days...
hi gregor , I've been trying the p 3 for 2 weeks, I added the 2 plenum kit. I watched your videos to help me with the adjustments. for some reason mine is inconstant. shooting at 880 fps, every 10 shots or so, someone drops to 587 fps. this doesn't always happen.I don't understand why?I'm using jsb monster redesigned 5.5 - 25.39 . do you have an idea?
Hi. My first guess would be that you have the hammer spring tension set too low. Try to increase it for about 2 revolutions. Also, keep track of the regulator pressure. If this happens because of too low hammer spring tension, then it is highly likely that the pressure when that happens is slightly higher than with other shots that are the correct speed.
@@gregorkamensek3923 thanks Gregor, I made your correction and now the problem is gone. I look forward to your next video on the p3 with all the best adjustments. best regards
I have a RTI P3 Performance .30 in fde comig from Aoa, got the acra rail adaptor too. Can't wait.!!!!!! I'll be trying JSB 50.15 & ZAN 56gr 1st ring out to see what it does at my 100 yard range.
Hi Gregor, sorry to bother you but I have a question about the p3. I bought a p3. I don't know if this is normal but I noticed the following. for example: if I set the pressure regulator to 100 bar, then fill the tank to 300, I can notice that the exit speed of the projectile is never constant. As the tank empties, the velocity of the projectile drops. at 300 bar I will have 289 mts, at 250 I will have 270 mts, at 150 I will have 260 mts. this prevents me from having consistency in my shots, especially in benchrest. I mounted the 2 plenum upgrade on my p3. could they be the cause? or do you think everything is normal?to have more consistency I am forced to connect an additional cylinder to the rifle, which keeps the pressure always constant. What you think?
The plenum should not be the reason for this. Does you regulator operate correctly? Is the regulated pressure the same when you fill your bottle to 300 bars and when it is at 200 bars?
@@gregorkamensek3923 the regulated pressure of the regulator is always stable and constant but the speed of the pellet in some stages is inconsistent. as I could see, the consistency is better from 210 to 190 bar of charge. I'm having a lot of trouble getting accuracy on benchrest. the most precise dot is monster redesigned. with slug you can't go to benchrest. If I can ask you for an email, I would like to be able to speak with you privately to get detailed advice.
thanks Gregor. Some excellent improvements on the P3, credit to RTI. Constant development. Hopefully some of the upgrades will be able to fit the P2. Especially the cheek rest and the rail. My income won't stretch to a new Prophet 3 years in a row 😢😅. One can dream and lust though.😂 The additional machine work on the rpb barrel now makes sense. Another puzzle sorted 👍.
What a great video , I learnt lot la from this . I can’t wait to get my P-3, I am very interested to see how your gun shoots pellets and slugs . I will be using JSB redesign’s in competition and I have been told that I can get over 1000 fps using them and still stay accurate. Can’t wait to find out
With RPB barrel, I would use slightly lower velocities with redesigns for competition, somewhere around 950 fps. At 1000 fps, they might start to spiral at longer ranges. If you want 1000 + fps accuracy with redesigns, you would need RTI long range barrel (LR 5.5)...
Hello Gregor Can you tell me About rear power wheel. How to set it up correctly. Is it same like hammer adjustable on prophet 1. Do you have any video on this. Keep up good work
Pressure assisted valves are different. I have explained this in the video for P2, basically, you adjust the power only by pressure. The hammer spring need just to be adjusted to high enough tension to be able to open the valve at the highest pressure you intend to use. For lower pressures, you can leave the hammer spring tension as it is.
What about weight, is it lighter than the P2 and if so, what's the weight? It looks a tad leaner than the P2. Not sure if I like the extra height on the scope rail. I think I'd prefer the P2 scope rail because it's closer to the barrel and still has enough MOA for my needs.
I don't have the exact weight of it but it is probably exactly the same as P2. Regarding scope height, I am kind of on your side. I do like the adjustability although the fixed 20 MOA was already great and I don't like high scopes, although they are quite often preferred with long range shooters...
@@tenseken Trust me, I am the king of getting faulty products. I actually quite known withing my close friends about that :) So I know how it is. Maybe that is the reason why I become such a DIY guy... LOL
@@tenseken I wouldn't wait... I have already shot the P-3, in terms of performance, it is the same as P-2, sam barrel same performance. I would go for it right away!
@Gregor, Thanks for these awesome videos you changed my mind and now i'm in the hunt to buy one! 😁 Please could you tell me what is the low possible working pressure and the highest? with their new regulator, ao the gun shoots fine and no Valve lock! Thanka in advance buddy... great work! 👍
I decided that I will only make a video about disassembly and valve operation as the rifle is basically the same in terms of operation, power and accuracy as Prophet 2...
My only complaint with the prophet was the magazine , especially the space between the barrell and how it squeezes in , to get a tight fit when changing barrels ( 177 to 22) for example I had to constantly keep adjusting it so I didn't get any air release from the back of the barrel , I could feel it on my eye when shooting . If i moved the barrel forward even 1mm the air would stop leaking but the magazine felt loose , still an awesome super accurate rifle even for benchrest, but just didn't have that slickness that my air arms had when loading pellets , has any of this been improved ?
I assume you issue was not due to barrel position but rather that the screw for fixating the barrel was without o-ring. This was solved now, I mentioned in the video that there are three screws now and the first one has an o-ring. The gun also has more slick feeling, the only thing that is quite sharp are the two side covers but you can only feel that if you grab the gun by the barrel/hose between the body and the front, but that almost never happens in my case.
@@gregorkamensek3923 Thanks for the reply , yes my barrel screw doesn't have an O-ring , I am on my 3rd barrel screw , they wear out pretty quickly but I am always switching barrels . Hopefully someone at the range picks one of these up and I can try before I buy . I am just looking for accuracy these days for bench shooting .
Gracias Gregor tengo una de las primeras P2 estoy muy dolido con el resultado, el señor Rok me gustaria que me ayudase creo que deberia hacer algo por los que sufrimos el problema desde el primer momento, un saludo.
Me entregaron el prophet 2 hace un mes y veo que tiene múltiples fallas de perdidas de la válvula de disparo. La marca se hará cargo de retirarlos del mercado y reemplazarlos???
I wonder if RTI will keep on producing the Priest 2 with the same upgrades that are made to the frame of the P3 such as the picatinny rail that can be angled and the new regulator. I love the Priest 2 and it's simplicity. It just works. I run mine with the LR barrel and it's a beast. My power figures are just as high as the Prophet 2 and it's extremely efficient with air.
Valve and reg on KRAIT recalled twice so we had to buy the HUMA regs for our KRAITS. Airmaks will never see our money again. Epic TWO seen at IWA on TH-cam with Giles Aurgun 101 about 40 minutes into vid. Now that could be worth waiting for. But that's me
@@mrfishfreak66If I understand correctly, the regulator does have two gauges and it is adjustable, but it does not have the bleed valve? If this is true, then it is the correct regulator of the performance P-3.
@gregorkamensek3923 thank you. Just not sure why others have a bleed valve on their regular, and I dont. in all the videos I have watched they do too. But I believe you. Thank you for taking the time to answer my questions.
what's the minimum needed psi per shot ? i cant get a straight answer from anyone regarding the actual psi work , i personally only use 70 - 80psi to get 400fps arrows from my homemade 10mm smooth bore air rifle...👍🏻
The reason why you don't get a straight answer is because no one is using the gun with such low pressure, it is not designed for it. Manufacturer states that it operates from 80 to 180 bars I believe. That is the operational pressure where the regulator works best. It is also the pressure where the valve and all the forces in the firing cycle are correctly balanced.
Iv got my p3 compact performance in the uk running 11.5ftlb in .22 on 105bar. But im pretty sure iv got restrictors in which is why reg is a tad high in my opinion. But it shoots very good 😀
Not yet. As you can imagine, that rifle combination is still a prototype and I have to get confirmation form RTI if and when they intend to release it.
I am wokring on a valve operation video now... so I don't know. I assume you are interested in accuracy? The accuracy will be exactly the same as P2 as the barrel is the same.
I have excuses, but they are just excuses. The gun works excellent for me, regarding accuracy, it is the same as P2 as it uses the same RPB barrel... I will get to it eventually :(
@@ruslankuschnir2141 Hard question to answer. Any and every airgun has potential to have problems. In my experience, RTI is reliable. I cannot compare them simply because I am not using FX.
Hi Gregor, thanks for your excellent videos. I have owned a Prophet Performance 1 for 2 years. I am very satisfied with it, it is an extremely reliable and robust weapon. I did not buy the version 2, because I found that the improvements were not sufficient .... I am happy to discover the modifications on the version 3. It is nevertheless regrettable that RTI does not propse a 100% slugs gun in 600 and 700mm ... maybe in the furur ? I was thinking of buying a Panthera because I want to shoot slugs between 150m and 250m... I'm looking forward to your next videos of this Prophet 3 shooting before I decide ... When will the Prophet 3 be available for sale ?
@@gregorkamensek3923 Thanks Gregor . Very good news, so I will wait for the 700mm slug gun . I hope you will have time to present it in one of your videos...Keep up the good work ....
@@TheCraigy83 Yeh, I made a mistake last time, it is total of 50 kg... 2x10kg + 4x5kg + 2x2,5kg + 5kg (bar). But the reason why it is bent is because the bar is made of 3 parts and is not a perfect fit on its joints. It also flexes a bit.
@gregorkamensek3923 thank you. I've got replacements for the pellet pusher arriving today. It looked dry with smalls cracks but no visible damage. Hopefully that's all it needs.
@@metiu5239 I don't know when I will be able to make it. If you are interested in power, accuracy and efficiency, I can say that those things are absolutely the same as on P2, so you can check out those videos. Next video with P-3 will be about the valve operation...
Hi Gregor, I'm not interested at the power, but I would like to know the consistency of the P-3; moreover I would like you to explain in detail how the balanced valve works. Thank you
the rifle is awsome but price wise in my country Saudi Arabia it's same as FX, urgan, Vulcan. so why i pay this much of money while i can get high end rifle. 1870 USD. nah
p3 the worst garbage I bought, bad trip valve, hammer breaks, bad pressure regulator, bad sidelever, rti must change all the engineering if you want to continue selling because they are a disaster
great video but keep waving the gun around back and forward very off putting for a good video stop waving the gun around be a bit more steady would be greatest video then
I like the minimalist structure, where everything is tied together through the shroud tube.
Oh Gregor! Thanks for this video, I feel like I'm behind on this one, I didn't even see it coming!
No worries! RTI surprised me as well with this one :)
Nice.
An adjustment knob for the scope rail in 5mrad clicks would be a real gem!
hope the regulator works well eventually, and no creeping, will see in future videos how it goes... thanks for this very entertaining video.
Thanks for the video. I have the priest 2 with three barrels including the .22 long range barrel for the JSB monster pellets. Will these barrels work in the P3 also?
Also, my bottle leaks air when filling when fully tightened or loose. This began after a flight across America. Is this an o-ring issue? Thanks
The barrels are interchangeable. The leak is most probably an o-ring issue.
Great review on the P3. It’s exactly the video I was looking for.
Have you determined the best pellets and slugs for the P3?
Depends on the caliber, .22 I would go with JSB monster redesigned and slug about 25 grain .218 size, for .25 JSB Kind Heavy and slug about 35 grain in .250 size.
Great video and amazing gun. Finally it fills all the gaps
Forget the difference of m.s. that varies from minimum to maximum with the new valve adjustment roulette, thank you.
Hi Gregor does this have the 1 in 32 twist lr barrel? On the Rti website it says the prophet 2 has a 1 in 16 twist RPB barrel? Really like the look of the p3. Looking for something to shoot light slugs and heavy pellets. Thanks
All new RTI guns in .22 and .25 cal have RPB barrel with fast twist (close to 1/16") and they are designed to be used for slugs as well as pellets. RTI was offering the .22 cal 1/32 barrel barrel that was designed specifically for pellets (and is till this day in my opinion one of the best barrels for shooting pellets at high velocities), but I don't think they are anymore because of lack of interest. Everyone wants to shoot slugs now :). That barrel was called 5,5 long range (had engraved 5,5LR). RPB is just as accurate with pellet as it was 5,5LR, you just need to be careful not to have too high velocity (typically under 900 fps but it depends on the pellet). The 5,5LR can hand 100 + yards MOA accuracy with JSB Monster redesigns at 1050 fps!
Thanks Gregor. Do you think the p3 is more efficient than the original prophet with the steamer valve. The prophet one in some reviews gave 90 shots over 50ft lb. Will the assisted valve do more? Thanks
Do you recommend an additional plenum? Thanks for the informative review.
There is no point for additional plenum on P-3 as it already has more than enough volume for all calibres. Maybe if they release 9mm but even with 9mm, I got about 900 fps with JSB pellets.
Gregor, what do you think of fast Twist rate for .22 for this gun? Why did they walked away from LR barrels?
Standard twist for airguns is about 1/17" (+-). That is a relative fast twist for pellets. The LR barrel has 1/32" twist. This twist is excellent for pellets (you can shoot pellets up to or even over 1000 fps and still retain pellet stability) but it is not good for slugs... Since there is all the rage about slugs now, they had to move to something that shoots both well even it it means that it shoot both slightly worse than a dedicated barrel would. This resulted in our development (RTI and I) of the RPB barrel. This barrel will shoot pellets just as accurately, but you cannot shoot them at that high velocity (if you still want accuracy)... You can check my other videos for more in depth explanation.
Not too bad, RTI have Finally started delivering a rifle worthy of the price they charge. BTW, Still waiting on your video showing detailed parts and function of the balanced valve...
Coming...
@@gregorkamensek3923 Excellent! I'm actually counting the days to see your video. Very excited, Gregor. I'm sure it will be detailed with excellent resolution video 🙂
@@redgum1340 Thanks. Resolution will be high, that is for sure as I am kind of camera gear nerd :) I wish that I could put out videos faster, but it is a lottery when I am able to go and record with day job and crazy rainy weather this year...
@@gregorkamensek3923 Yes Gregor, I know you love camera gear, that's why I knew it would have great resolution. You always do a very good job with your videos. Indeed, the weather has gone mad and it will only only get worse. The greed of man has just about ruined this planet and our children will suffer badly. The world, as we know it, is in its last days...
@@redgum1340 Yep, you couldn't said it better...
hi gregor , I've been trying the p 3 for 2 weeks, I added the 2 plenum kit. I watched your videos to help me with the adjustments. for some reason mine is inconstant. shooting at 880 fps, every 10 shots or so, someone drops to 587 fps. this doesn't always happen.I don't understand why?I'm using jsb monster redesigned 5.5 - 25.39 . do you have an idea?
Hi. My first guess would be that you have the hammer spring tension set too low. Try to increase it for about 2 revolutions. Also, keep track of the regulator pressure. If this happens because of too low hammer spring tension, then it is highly likely that the pressure when that happens is slightly higher than with other shots that are the correct speed.
@@gregorkamensek3923 thanks Gregor, I made your correction and now the problem is gone. I look forward to your next video on the p3 with all the best adjustments. best regards
@@SerenaFranchi-v6tHappy to hear that.
Dang great improvements to the gun!
I have a RTI P3 Performance .30 in fde comig from Aoa, got the acra rail adaptor too. Can't wait.!!!!!! I'll be trying JSB 50.15 & ZAN 56gr 1st ring out to see what it does at my 100 yard range.
Thanks for another great video, could you please cover adding plenum extensions
With P-3 the plenum is already enlarged... so no need to add any extensions
Hi Gregor, sorry to bother you but I have a question about the p3. I bought a p3. I don't know if this is normal but I noticed the following. for example: if I set the pressure regulator to 100 bar, then fill the tank to 300, I can notice that the exit speed of the projectile is never constant. As the tank empties, the velocity of the projectile drops. at 300 bar I will have 289 mts, at 250 I will have 270 mts, at 150 I will have 260 mts. this prevents me from having consistency in my shots, especially in benchrest. I mounted the 2 plenum upgrade on my p3. could they be the cause? or do you think everything is normal?to have more consistency I am forced to connect an additional cylinder to the rifle, which keeps the pressure always constant. What you think?
The plenum should not be the reason for this. Does you regulator operate correctly? Is the regulated pressure the same when you fill your bottle to 300 bars and when it is at 200 bars?
@@gregorkamensek3923 the regulated pressure of the regulator is always stable and constant but the speed of the pellet in some stages is inconsistent. as I could see, the consistency is better from 210 to 190 bar of charge. I'm having a lot of trouble getting accuracy on benchrest. the most precise dot is monster redesigned. with slug you can't go to benchrest. If I can ask you for an email, I would like to be able to speak with you privately to get detailed advice.
@@zaruan What pellet weight are you using?
@@gregorkamensek3923 JSB MONSTER REDESIGNED CAL. 5,5 1,645 G . Or slug knock out .216 .217
thanks Gregor.
Some excellent improvements on the P3, credit to RTI. Constant development.
Hopefully some of the upgrades will be able to fit the P2. Especially the cheek rest and the rail.
My income won't stretch to a new Prophet 3 years in a row 😢😅. One can dream and lust though.😂
The additional machine work on the rpb barrel now makes sense. Another puzzle sorted 👍.
There are not many interchangeable parts between P2 and P3 unfortunately. The really redesigned most of the gun for P3.
What bi-pod are you using here?
(Great video!)
Thanks. I am using Accu-tac bipod.
Very complete review....!!!!!!🇨🇱👍
What a great video , I learnt lot la from this . I can’t wait to get my P-3, I am very interested to see how your gun shoots pellets and slugs . I will be using JSB redesign’s in competition and I have been told that I can get over 1000 fps using them and still stay accurate. Can’t wait to find out
With RPB barrel, I would use slightly lower velocities with redesigns for competition, somewhere around 950 fps. At 1000 fps, they might start to spiral at longer ranges. If you want 1000 + fps accuracy with redesigns, you would need RTI long range barrel (LR 5.5)...
@@gregorkamensek3923 Thank you for that . I am looking forward to getting my P-3, I am looking forward to taking it to EBR , will you be going ?
@@TripleGRogerLait I hope, but I am not sure yet...
RTI finally did it. Informative video as usual.
Thanks!
Hello Gregor
Can you tell me
About rear power wheel.
How to set it up correctly.
Is it same like hammer adjustable on prophet 1.
Do you have any video on this.
Keep up good work
Pressure assisted valves are different. I have explained this in the video for P2, basically, you adjust the power only by pressure. The hammer spring need just to be adjusted to high enough tension to be able to open the valve at the highest pressure you intend to use. For lower pressures, you can leave the hammer spring tension as it is.
What about weight, is it lighter than the P2 and if so, what's the weight? It looks a tad leaner than the P2. Not sure if I like the extra height on the scope rail. I think I'd prefer the P2 scope rail because it's closer to the barrel and still has enough MOA for my needs.
I don't have the exact weight of it but it is probably exactly the same as P2. Regarding scope height, I am kind of on your side. I do like the adjustability although the fixed 20 MOA was already great and I don't like high scopes, although they are quite often preferred with long range shooters...
I just wish all the issues on the p2 will be resolved in the p3. The leaking valve. Mine still out for service and it’s already a month
I am sorry to hear that.
@@gregorkamensek3923 yeah I respect and follow that’s what made me buy an Rti product but my experience and expectations were different
@@tenseken Trust me, I am the king of getting faulty products. I actually quite known withing my close friends about that :) So I know how it is. Maybe that is the reason why I become such a DIY guy... LOL
@@gregorkamensek3923 i was offered for an upgrade to a p-3 but im still waiting for your shooting test to decide on it
@@tenseken I wouldn't wait... I have already shot the P-3, in terms of performance, it is the same as P-2, sam barrel same performance. I would go for it right away!
Ambidixtross side liver must be installed also for a right or left handed......
@Gregor, Thanks for these awesome videos you changed my mind and now i'm in the hunt to buy one! 😁 Please could you tell me what is the low possible working pressure and the highest? with their new regulator, ao the gun shoots fine and no Valve lock! Thanka in advance buddy... great work! 👍
Thanks. Reg. goes from 80 to 180 bars. You might be able to stretch it a bit but I would stick to these limits.
Great review Gregor. Have you completed Part 2 yet?
I decided that I will only make a video about disassembly and valve operation as the rifle is basically the same in terms of operation, power and accuracy as Prophet 2...
Is the power level for this P3 the same of the P2 ? Just curious to see some chrony numbers expecially in .25 cal.
Yes, it is the same.
Good morning, what updates can be brought to prophet 2, thank you.
I will try to get some info about that but I doubt there would be much to bring as P3 is completely redesigned...
My only complaint with the prophet was the magazine , especially the space between the barrell and how it squeezes in , to get a tight fit when changing barrels ( 177 to 22) for example I had to constantly keep adjusting it so I didn't get any air release from the back of the barrel , I could feel it on my eye when shooting . If i moved the barrel forward even 1mm the air would stop leaking but the magazine felt loose , still an awesome super accurate rifle even for benchrest, but just didn't have that slickness that my air arms had when loading pellets , has any of this been improved ?
I assume you issue was not due to barrel position but rather that the screw for fixating the barrel was without o-ring. This was solved now, I mentioned in the video that there are three screws now and the first one has an o-ring. The gun also has more slick feeling, the only thing that is quite sharp are the two side covers but you can only feel that if you grab the gun by the barrel/hose between the body and the front, but that almost never happens in my case.
@@gregorkamensek3923 Thanks for the reply , yes my barrel screw doesn't have an O-ring , I am on my 3rd barrel screw , they wear out pretty quickly but I am always switching barrels . Hopefully someone at the range picks one of these up and I can try before I buy . I am just looking for accuracy these days for bench shooting .
Between the RTI P3 and the Huben KI. Which would be your preferred air rifle?
This is probably the most frequent question I give and by now, i think it deserves a video or "shorts" on its own...
@@gregorkamensek3923 I hope you do make a comparative video on the two platforms.
More P3 reviews needed for me
The mount where the viewfinder goes comes with 20 moas, it can be left at 0 moas, thanks
Yes, the adjustable rail on P-3 can go down to 0 MOA.
why hammer adjuster with assisted valve ? Hammer have not effect on my Uragan 2
Gracias Gregor tengo una de las primeras P2 estoy muy dolido con el resultado, el señor Rok me gustaria que me ayudase creo que deberia hacer algo por los que sufrimos el problema desde el primer momento, un saludo.
Hi. I would suggest that you contact RTI directly about the problem you are having. I am sure they will help you...
I was saving up for a p2 but now this is out . if you could only buy one would it be the P3?
Yes, I would go for P-3 for sure.
Hi. Great job. Thanks
Možes li preporuciti tu pusku? Dvoumim se između nje i FX Dynamic Expres
Ne mogu usporediti jer nisam pokušao FX Dynamic ali meni se P-3 sviđa...
Me entregaron el prophet 2 hace un mes y veo que tiene múltiples fallas de perdidas de la válvula de disparo. La marca se hará cargo de retirarlos del mercado y reemplazarlos???
Don't know, you will have to ask RTI...
I hope to get mine soon😍
I wonder if RTI will keep on producing the Priest 2 with the same upgrades that are made to the frame of the P3 such as the picatinny rail that can be angled and the new regulator. I love the Priest 2 and it's simplicity. It just works. I run mine with the LR barrel and it's a beast. My power figures are just as high as the Prophet 2 and it's extremely efficient with air.
They said that right now, the Priest 2 will stay as it is. But that might change in the future (so no answer to your question :)).
@@gregorkamensek3923 Thanks for the feedback. I guess we'll see.
Nice video! What bipod is that?
it is Accu-Tac
@@gregorkamensek3923 thank you
Real nice advancements
Hopefully no assisted valve problems now was going for airmaks because of the prophet 2 problems, but maybe wait for the p3 to come out?? Who knows!
Valve and reg on KRAIT recalled twice so we had to buy the HUMA regs for our KRAITS.
Airmaks will never see our money again.
Epic TWO seen at IWA on TH-cam with Giles Aurgun 101 about 40 minutes into vid. Now that could be worth waiting for.
But that's me
We need this gun in sub 12 for uk immediately👍
I bought a P3 in the states and noticed that my regular did not come with a bleedport on the regular. Is this normal? Should there be one??
That is normal. The revisions of the regulator are independent of the RTI rifle models...
@gregorkamensek3923 ok, even if it supposed to the performance version?
@gregorkamensek3923 it's supposed to be the performance one, so far, the ones that have it all have the one with the bleedport on the regular
@@mrfishfreak66If I understand correctly, the regulator does have two gauges and it is adjustable, but it does not have the bleed valve? If this is true, then it is the correct regulator of the performance P-3.
@gregorkamensek3923 thank you. Just not sure why others have a bleed valve on their regular, and I dont. in all the videos I have watched they do too. But I believe you. Thank you for taking the time to answer my questions.
What barrel is the P3 using , and what calibers with what barrels?
The barrel remained the same as on P2
Good morning, you can put the strip where the viewfinder of the p 3 is mounted to zero moas, thank you.
You mean like a red dot?
@@gregorkamensek3923 The mount where the viewfinder goes comes with 20 moas, it can be left at 0 moas, thanks
what's the minimum needed psi per shot ? i cant get a straight answer from anyone regarding the actual psi work , i personally only use 70 - 80psi to get 400fps arrows from my homemade 10mm smooth bore air rifle...👍🏻
The reason why you don't get a straight answer is because no one is using the gun with such low pressure, it is not designed for it. Manufacturer states that it operates from 80 to 180 bars I believe. That is the operational pressure where the regulator works best. It is also the pressure where the valve and all the forces in the firing cycle are correctly balanced.
@@gregorkamensek3923
Thanks for replying m8 👍🏻
Iv got my p3 compact performance in the uk running 11.5ftlb in .22 on 105bar. But im pretty sure iv got restrictors in which is why reg is a tad high in my opinion. But it shoots very good 😀
Gregor...do these barrels have polygonal rifling?
No, these are custom barrels made by LW for RTI called RPB (RTI proprietary barrel) with conventional rifling.
Did you do a video on the 35 prophet
Not yet. As you can imagine, that rifle combination is still a prototype and I have to get confirmation form RTI if and when they intend to release it.
Will this be available in sub 12 ft pounds for the guys in the uk!
I confident that it will be.
Good job putting this video together. Very useful. Thanks for your work
Thanks :)
When is part 2 coming?
It is coming, just not sure when. Sorry. If there is any consolation, the performance is virtually the same as P2 with added plenum...
when will Part 2 come out?
I am wokring on a valve operation video now... so I don't know. I assume you are interested in accuracy? The accuracy will be exactly the same as P2 as the barrel is the same.
How much is the price
The MSRP is 1.399,00 €, but you should check with local retailer: www.rtiarms.eu/retailers
What happened to Part 2?
I have excuses, but they are just excuses. The gun works excellent for me, regarding accuracy, it is the same as P2 as it uses the same RPB barrel... I will get to it eventually :(
Where is the bleed screw on the P3
When you remove the but pad rubber, you will see it under the hammer adjustment wheel.
Is that same barrel as prophet 2?
Yes
Hi Can this rifle shoot 20grn in 177 caliber?
I haven't tried it yet, but I don't see any reason why it wouldn't. It definitely has enough power.
I want to buy a rifle, but whether FX or RTI.? RTI is reliable? 177 k
@@ruslankuschnir2141 Hard question to answer. Any and every airgun has potential to have problems. In my experience, RTI is reliable. I cannot compare them simply because I am not using FX.
Hi Gregor, thanks for your excellent videos.
I have owned a Prophet Performance 1 for 2 years. I am very satisfied with it, it is an extremely reliable and robust weapon. I did not buy the version 2, because I found that the improvements were not sufficient .... I am happy to discover the modifications on the version 3. It is nevertheless regrettable that RTI does not propse a 100% slugs gun in 600 and 700mm ... maybe in the furur ? I was thinking of buying a Panthera because I want to shoot slugs between 150m and 250m...
I'm looking forward to your next videos of this Prophet 3 shooting before I decide ...
When will the Prophet 3 be available for sale ?
P-3 will be out in April 23. 700mm slug gun is also coming :)
@@gregorkamensek3923 Thanks Gregor . Very good news, so I will wait for the 700mm slug gun . I hope you will have time to present it in one of your videos...Keep up the good work ....
@@ragotphilippeh6496 Of course... I am waiting for it as eagerly as you are :)
how about a tuning guide for the prophet 3?
Yeah, some day, cannot promise when... :(
Hi Gregor, Great review. Any idea of a release date? Thanks, keep up the great work!
Hi. Yes, they will start shipping in April. Thanks :)
When is the part two my friend ?
Not sure exactly, first I intend to make a video about valve operation...
@@gregorkamensek3923 I really look forward to it buddy 👍
rti is extraordinary
Yp
Gregor, that weight bar will bend forever if you leave those weights on it. Anyway, I love your videos. Thank you.
I was think Gregor must be strong to lift those weights. I would start with just the small ones on the ends...
🤣😂
theres like 25kg on it i have the same weights 😂
@@TheCraigy83 No, it is exactly 92kg. Bar 12kg, 2x15kg, 4x10kg, 2x5kg as I see. 😊
@@TheCraigy83 Yeh, I made a mistake last time, it is total of 50 kg... 2x10kg + 4x5kg + 2x2,5kg + 5kg (bar). But the reason why it is bent is because the bar is made of 3 parts and is not a perfect fit on its joints. It also flexes a bit.
RTI ARMS Prophet 2 - that's leaking joke, not airgun. Never again RTI!
I'm having some air escape from between the buttpad and body at the top of butt pad into my ear. Also a ping
Check the o-ring on the pellet pusher and the barrel, These are the most likely reasons for what you described.
@gregorkamensek3923 thank you. I've got replacements for the pellet pusher arriving today. It looked dry with smalls cracks but no visible damage. Hopefully that's all it needs.
Hi Gregor, I wait for a video test and a video where you disassemble the P3
Coming.
@@gregorkamensek3923 Hi Gregor,
do we have to wait much longer for the new video?? Come on, I'm super super curious!
@@metiu5239 I don't know when I will be able to make it. If you are interested in power, accuracy and efficiency, I can say that those things are absolutely the same as on P2, so you can check out those videos. Next video with P-3 will be about the valve operation...
Hi Gregor,
I'm not interested at the power, but I would like to know the consistency of the P-3; moreover I would like you to explain in detail how the balanced valve works.
Thank you
@@metiu5239 You will get these answers... Sorry if it takes so long for me to finish testing and make videos...
the rifle is awsome but price wise in my country Saudi Arabia it's same as FX, urgan, Vulcan. so why i pay this much of money while i can get high end rifle. 1870 USD. nah
Hello MR l one air gun p3 have vLve okey no
great, thinking of as 4,5mm but it is so expensive here...
p3 the worst garbage I bought, bad trip valve, hammer breaks, bad pressure regulator, bad sidelever, rti must change all the engineering if you want to continue selling because they are a disaster
great video but keep waving the gun around back and forward very off putting for a good video stop waving the gun around be a bit more steady would be greatest video then
Thanks for the tip.
Hello Gregor, I have a few questions about Huben K1. What is your email so that I can write it to you?