@@desmondmitchell5602 might have to grab a pair of corded ones to make it right. It’s like listening to kanye in 2024🤣 throw on that college drop out 🤣
I had the same issue with the Gtx black label the dock it came with didn't work. Once I got it exchanged it's been good. That Mforce blade to me is a great all-around blade
@@FaTaL1h it was cutting well just making the clients skin raise up and had to go over spots a couple times. Was really hoping to keep them but there’s other clippers I’ll replace them with 🤔
The Envy 2 is the real beast its flying under the radar but its a beast and super good for fading and its only 130$. And you can put a master blade on it so you can use the dbl magnetic andis guards and its actually quiet no lawn mower sound
@cutsbycoast atlanta barber supply. Came pretty quick for me. I highly recommend putting a master blade on it though cause the guards it comes with although they are good they dont beat the dbl magnetic purple guards!
For me they were as loud as the vector motor clippers but half the actual power. I said if I’m gonna use something loud I’ll just grab the metal instincts 🤣
The only trimmers I’ve had to that besides these are the original FX3 red trimmer launch… that barber supply told me “don’t use them on kids” i was heated
I wasn’t sure if all barber supplies had that policy. Where I’m at in KY we only have like Sally & Cosmoprof so i never buy from them but they have no return policies. If they ran for 3 hours & could cut straight hair… id still have them now. Thanks for the support bro 🦾🦾
No sir worst set I’ve reviewed yet 🗑️ i do love how they look just didn’t love them. Great for wave haircuts or undercut on dreads or braids. They were heavy and annoying sounding as well.
@@cutsbycoast Damm… I have both of them been using like 3 week already I love it cut the clipper and make more quite when I use a lot but that trimmer for me it aight it can’t cut big bulb like trying to line up the back for burst fade style or the V
@@WazzyTV a lot of them get sent clipper for free. I pay for mine, i give honest reviews. This is like my second negative review out of 20+ clippers lol. It takes 4-5 negatives for me to not like it.
!["สนธิ" ห่วงมีขบวนการปกป้อง "ทนายตั้ม" : [THE MESSAGE]](http://i.ytimg.com/vi/2GQNp3EoMc0/mqdefault.jpg)
Keep dropping bro been watching your channel dope content fr
Thanks for the support bro!! Any questions you have don’t hesitate to ask! 🦾
Thanks for keeping it real coast, thats hard to come by now a days, i already knew you wont going to like them lol
@@desmondmitchell5602 might have to grab a pair of corded ones to make it right. It’s like listening to kanye in 2024🤣 throw on that college drop out 🤣
Lol i bet the paint was going to chip on the masters to @@cutsbycoast
I had the same issue with the Gtx black label the dock it came with didn't work. Once I got it exchanged it's been good. That Mforce blade to me is a great all-around blade
@@FaTaL1h it was cutting well just making the clients skin raise up and had to go over spots a couple times. Was really hoping to keep them but there’s other clippers I’ll replace them with 🤔
your awesome bro very good and professional 🔥🔥🙏 very humble
Thank you very much!!! I appreciate your support 💯🙏🏽
Stay consistent Coast!
Thanks bro!! Got a new drop tonight
The Envy 2 is the real beast its flying under the radar but its a beast and super good for fading and its only 130$. And you can put a master blade on it so you can use the dbl magnetic andis guards and its actually quiet no lawn mower sound
@@Mike-hy8cs i thought it looked kinda slick and saw it had 200 more Spm’s + the ceramic cutter. Where did you order it from? Thanks bro!
@cutsbycoast atlanta barber supply. Came pretty quick for me. I highly recommend putting a master blade on it though cause the guards it comes with although they are good they dont beat the dbl magnetic purple guards!
@@Mike-hy8cscordless master blade ?
@@infiniteg7852 Doesnt matter you can put the corded master blade on there too if you want
@@Mike-hy8cs can you use the Andis cutting blade ? Or the envy cutting blade ?
Like the content. Just subscribed to your channel. Please improve your lighting and focusing.
Thank you sir! I will work on that!
I just got the clipper and definitely is more quiet then I thought it was going to be but only time will tell if they get loud overtime
For me they were as loud as the vector motor clippers but half the actual power. I said if I’m gonna use something loud I’ll just grab the metal instincts 🤣
@@cutsbycoast 💯
Those blades must be sharp because it's hard to scar people with any of the T-Outliner blades. They seem to be more forgiving than most other blades.
Definitely sharp af, maybe back then out if you grab this pair. First GTX Exo was the best 🔥
I told people the trimmer scars people out the box, I sent mine back instantly
The only trimmers I’ve had to that besides these are the original FX3 red trimmer launch… that barber supply told me “don’t use them on kids” i was heated
@@cutsbycoast yeah Andis missed a grand opportunity here I waited for reviews on the masters and happy I waited
I’m quick to send tools back. If I’m not FULLY satisfied, then I’m not keeping it
I wasn’t sure if all barber supplies had that policy. Where I’m at in KY we only have like Sally & Cosmoprof so i never buy from them but they have no return policies. If they ran for 3 hours & could cut straight hair… id still have them now. Thanks for the support bro 🦾🦾
@@cutsbycoast yea man. I just think we would be getting near perfect machines for that price. Great content. Subscribed
Lithium gear grease
@@japanempire24 🐐🐐🐐
Don't like the new andis clipper and trimmer?
No sir worst set I’ve reviewed yet 🗑️ i do love how they look just didn’t love them. Great for wave haircuts or undercut on dreads or braids. They were heavy and annoying sounding as well.
@@cutsbycoast Damm… I have both of them been using like 3 week already I love it cut the clipper and make more quite when I use a lot but that trimmer for me it aight it can’t cut big bulb like trying to line up the back for burst fade style or the V
Spm rpm is the same thing 😂😂😂😂😂😂
@@japanempire24 i thought so 🤣 well the master has same rpm’s as a magic clip for double the price 😱🤣
spm isnt the same as rpms. Spm is strokes per minute meaning how fast the blade is moving. Rpms is the actual power or torque of the machine.
Not impressed with this clipper thank you for the review
I still wish it had cut better than it did. I'm thinking about buying the Envy 2 & changing the blade to a Master blade.
@@cutsbycoastdefinitely, wanna see where i can buy the phaze blade separately for my envy 2, not tryna spend $300 just to get a blade
every reviewer likes the clipper only you
@@WazzyTV a lot of them get sent clipper for free. I pay for mine, i give honest reviews. This is like my second negative review out of 20+ clippers lol. It takes 4-5 negatives for me to not like it.
CutbyCoast only tells the truth‼️‼️
@@dc.cuts_ 💯
Trash set
On god, might as well grab a corded set for half the price & more power
U trash at cutting 😢
@@julesmarinas-io4ygyour comment is trash... didn't I hear your mom call you up from the basement stfu