Hi Good Morning Time depends on the capacity of the sump tank/bore pump. If the decent capacity pump is used then the overall process takes around 20 to 25 min. But you can't use a more capacity pump also, because it may throw resin into the overhead tank. Thanks :)
ನಮಸ್ತೇ SALT water ತೊಗೊಳೋ Valve block ಆಗಿದ್ಯಾ ಅಂತ check ಮಾಡ್ತೀರಾ ಒಂದು ಸಲ? ಇನ್ನೊಂದು ಕಾರಣ ಏನು ಅಂದ್ರೆ air block ಆಗುತ್ತೆ ಒಂದೊಂದು ಸಲ, ನೀವು ಎಲ್ಲ on ಇದ್ದಾಗ Regeneration step ಇಂದ Rinse ಸ್ಟೆಪ್ ಗೆ move ಮಾಡಿ, ನಿಮ್ಗೆ air bubbles ಕಾಣಿಸುತ್ತೆ ಉಪ್ಪಿನ ನೀರಿನ ಬೇಸಿನ್ ಅಲ್ಲಿ. 5 sec ಆದ್ಮೇಲೆ ಮತ್ತೆ ವಾಪಸ್ regenearion step ಗೆ move ಮಾಡಿ ನೋಡಿ.
Hi good afternoon If you don't have bypass value, while changing one mode to another mode, water pressure may build inside which could damage your setup. Bypass valve won't allow this to happen. Thanks you :)
@@CoolHomeTech ನಾನು softened water ಉಪಯೋಗಿಸುತ್ತಿರುವೆನು. ಮತ್ತು ಗಿಡಗಳು ಬೆಳೆಯುತ್ತಿಲ್ಲ ಮತ್ತು ಮೆಲ್ಲನೆ ಸಾಯುತ್ತಿದೆ. ಗೊಬ್ಬರ ನೀರು ಸರಿಯಾಗಿದೆ. ನೆರಳು ಮಾಡಿರುವೆನು. Rose Anthurion ferns- indoor plants ಯಾವುದು ಬರುತ್ತಿಲ್ಲ. google ಮಾಡಿದರೆ softher water ಒಳ್ಳೆದಲ್ಲ ಎಂದಿದೆ. ಅದಕ್ಕೆ ನಿಮ್ಮ ಸಹಾಯ ಕೇಳುತ್ತಿದ್ದಿನಿ.
Hi Saleem Good day As per the ISO standard For RO water allowed max acceptable TDS is 80 PPM For Borewell water allowed max acceptable TDS limit 500PPM I think your borewell water TDS is under the limit. Regards Praveen
@@CoolHomeTech Thanks Praveen for ur quick response. So do I need a softener to be installed? Actually I'm building a new house may be my tiles and water taps will get spoiled. Please suggest.
Dear Sharath Please send me a email to below E-mail ID. Will send the details. Need some information from you on water quality before answering your question coolhometechpraveen@gmail.com Regards Praveen
After the most recent regeneration, I noticed that that the output from water softener has slowed down. As a result, overhead tank is filling up very slowly and motor is running for too long. Have you faced any such issue where output from water softener is slowing down considerably? Could it be due to air block or some kind of block inside the water softener? Is there a way to clean up or perform maintenance to improve the flow of water through the water softener?
@@CoolHomeTech can you share the details? i am based in chennai but the filter guys we are working with can't seem to debug the issue. i will may be interact with this person on the phone, get his instructions and may be pay him appropriately.
Hi Dinesh Hardness is bit higher side. I feel you need close to 10kg salt. This will increase regeneration time since you need to use close to 50 liters of water (for 10kg salt). Also 50 liter softener is bit smaller I feel. For this hardness you need to perform two regeneration cycles per month. (Again depends on how much water you use per day) Thank you.
Moin.. guter Beitrag! Thanks. :) Hast du schon mal dieses spezielle Wasserstoffwasser von einem solchen Wasserstoff Generator jemals probiert? Dieses Getränk ist echt richtig gut! :) Wir trinken es vor allem Training !! ☺
Thank you ,very informative But one doubt sir, Actually the regeneration in my house is done by the maintainence guy, he always make us turn onn the water pump before he starts and tells to turn off after it's done Can you please explain why is that? Because I'm planning to do it myself from now on.
Hi The water pump must be ON throughout this process. You can do it yourselves for your house. Go through this video a few more times if you need it. You will master it within 2-3 attempts. Regards
@@CoolHomeTech and I need help with another thing sir, in my case the step names around the multi-port handle have been erased as it's quite old. Is there anyway I can figure out the slot names or do I have to experiment and find out what slot does what?.
@@CoolHomeTech hi Sir Can you explain why in both process Rinse and Regeneration the system still using the pump but the flow rate of the regeneration is much lower than the rinse as can be seen in the video? Also I see that the water coming from the height, is there any pump up there while on those processes?
Thanks for the subtitles as I don't understand kannada 😊
Thumba thanks sir. Very crystal clear explanation straight to the point. And thanks for the tip about cleaning regeneration pipe
Very good video, adre neevu motor ON madbeku antha hellila
Which softner is good
Good video bro, easy simple process.. I could do it on my own
Thanks for you Sir, very good response. We are very happy Sir. So many helpfull to me..
❤🌄🌹🌹🌹🙏🙏👋💐🇮🇳👍
Very nice ur detailed information.
Thanks a lot.
Pretty good job man....
Very useful. Thank you.
Super explanation 👍
Very good description step by step. I did it successfully. Now my multi port valve is leaking. Is there any one to repair it in Bangalore?
Super sir
Great job vedio Sir how minutes in service and rinse
Hi
Good Morning
Time depends on the capacity of the sump tank/bore pump. If the decent capacity pump is used then the overall process takes around 20 to 25 min.
But you can't use a more capacity pump also, because it may throw resin into the overhead tank.
Thanks :)
@@CoolHomeTech my pump water softener motor is a 1hp 1 host power
My tank softener is 400liters
Salt 50kilos .
Explain supper sir..
Super explaination sir
How much cost of this water softner incuding charesames of instalation with all matirialofyouers at faridabad haryana
Sir Only 30/40 ground floor home ge 5 members , Yavdu company water softener akisbeku neevu helidre adanne akistivi, pls Tilisi,
Namastee Vihan
Company softners bagge idea illa. Yenadru tilidare heltini nimage.
Dhanyavaada
@@CoolHomeTech Dhanyavadagalu
Sir solt yast dinkke change madabeku
Hi
Please watch this video.
th-cam.com/video/iR2lypiE7uY/w-d-xo.html
Regards
Sir regenerate nalli valve itrunu salt water thagothilla nam Maneliro softener yen madodu
ನಮಸ್ತೇ
SALT water ತೊಗೊಳೋ Valve block ಆಗಿದ್ಯಾ ಅಂತ check ಮಾಡ್ತೀರಾ ಒಂದು ಸಲ? ಇನ್ನೊಂದು ಕಾರಣ ಏನು ಅಂದ್ರೆ air block ಆಗುತ್ತೆ ಒಂದೊಂದು ಸಲ, ನೀವು ಎಲ್ಲ on ಇದ್ದಾಗ Regeneration step ಇಂದ Rinse ಸ್ಟೆಪ್ ಗೆ move ಮಾಡಿ, ನಿಮ್ಗೆ air bubbles ಕಾಣಿಸುತ್ತೆ ಉಪ್ಪಿನ ನೀರಿನ ಬೇಸಿನ್ ಅಲ್ಲಿ. 5 sec ಆದ್ಮೇಲೆ ಮತ್ತೆ ವಾಪಸ್ regenearion step ಗೆ move ಮಾಡಿ ನೋಡಿ.
Sir this proses time water controller on or off madabeka ??
Hi
Namastee
Yes. Water should be flowing contineously till everything completes.
Thank you
Regeneration Alle salt water complete out aadhmele ,Rinse madbeka.
Or
Rinse Alle salt water out maadbodha
Regeneration process alli salt water full kali admele, Rinse operation madbeku. Amele Service mode
@@CoolHomeTech thank you sir
Sir regeneration maduvaga motor on madbeka
Hi
Good afternoon
Yes. Pump should be ON throughout this process.
Regards
Why bypass valve needs to be opened everytime the mpv mode is changed?
Hi
good afternoon
If you don't have bypass value, while changing one mode to another mode, water pressure may build inside which could damage your setup. Bypass valve won't allow this to happen.
Thanks you :)
Sir, how much time is required to fill 1000 ltrs water tank in service mode
Hi Satya
Not measured this exactly. I have 1 HP Texmo sump tank pump, could take 10-15 min l guess to fill 1k liters.
Regards
Why using salt for filtering
Naavu softner water gidagalige upayogisa bahudhe. ... Kelavaru sayuthadhe endhu heluthare?
Regeneration maduvaga horage hoguva water bagge keltidira?
@@CoolHomeTech illa. Hora hoguva neerina bagge kelilla. Badhalaagi soft aagi baruva neerina bagge keluthidhene
ಇಲ್ಲ. ಆ ತರ ಏನು problam ಇಲ್ಲ. ನಾನು 4 ವರ್ಷಗಳಿಂದ use ಮಾಡ್ತಿದೀನಿ ಗಿಡಗಳಿಗೆ.. Regeneration ಮಾಡುವಾಗ ಬರುತ್ತಲ್ಲ ಅದು use ಮಾಡಿದ್ರೆ problem ಆಗಬಹುದು.
ಧನ್ಯವಾದ
@@CoolHomeTech ನಾನು softened water ಉಪಯೋಗಿಸುತ್ತಿರುವೆನು. ಮತ್ತು ಗಿಡಗಳು ಬೆಳೆಯುತ್ತಿಲ್ಲ ಮತ್ತು ಮೆಲ್ಲನೆ ಸಾಯುತ್ತಿದೆ. ಗೊಬ್ಬರ ನೀರು ಸರಿಯಾಗಿದೆ. ನೆರಳು ಮಾಡಿರುವೆನು. Rose Anthurion ferns- indoor plants ಯಾವುದು ಬರುತ್ತಿಲ್ಲ. google ಮಾಡಿದರೆ softher water ಒಳ್ಳೆದಲ್ಲ ಎಂದಿದೆ. ಅದಕ್ಕೆ ನಿಮ್ಮ ಸಹಾಯ ಕೇಳುತ್ತಿದ್ದಿನಿ.
Can you pl arrange to send a technician for our pentair water softener to our farm house in HD kote, unable to get an experienced person,
Hi Nagalakshmi
Pentair company service center check madi?
Regards
Sir,
My house borewell water is 120 TDS .
Please advice.
Hi Saleem
Good day
As per the ISO standard
For RO water allowed max acceptable TDS is 80 PPM
For Borewell water allowed max acceptable TDS limit 500PPM
I think your borewell water TDS is under the limit.
Regards
Praveen
@@CoolHomeTech Thanks Praveen for ur quick response.
So do I need a softener to be installed? Actually I'm building a new house may be my tiles and water taps will get spoiled.
Please suggest.
Hi Saleem
What is the hardness of your borewell water?
Regards
Hi
TDS won't damage your taps and tiles. Only hardness do. Please check the hardness value in your water test report.
Thank you
sir nam mane softner capacity is 200 lts, yest salt mathe water quantity use madbeku heli.
Dear Sharath
Please send me a email to below E-mail ID. Will send the details. Need some information from you on water quality before answering your question
coolhometechpraveen@gmail.com
Regards
Praveen
Thank you sir , will mail it !!
Sir, please tell me Resin should be changed frequently or only regeneration is enough and resin stay in the cylinder permanently
Hi Puneet
Only regeneration needed frequently. Resin life is upto 6 years.
Regards
After the most recent regeneration, I noticed that that the output from water softener has slowed down. As a result, overhead tank is filling up very slowly and motor is running for too long. Have you faced any such issue where output from water softener is slowing down considerably?
Could it be due to air block or some kind of block inside the water softener?
Is there a way to clean up or perform maintenance to improve the flow of water through the water softener?
Hi
Good evening
Could be blockages in the softner due to silt. If you are in Bangalore I have a contact who can get it fixed.
Regards
@@CoolHomeTech can you share the details? i am based in chennai but the filter guys we are working with can't seem to debug the issue. i will may be interact with this person on the phone, get his instructions and may be pay him appropriately.
Hi
Please check once with this guy
Vijayprakash
+917022725836
Haw many days need between regenerations
Hi
Please watch this.
th-cam.com/video/iR2lypiE7uY/w-d-xo.html
Regards
Hi.
Please watch this.
th-cam.com/video/iR2lypiE7uY/w-d-xo.html
Regards
How much salt required for 50lit resin, regeneration madi??
Hi Dinesh
How much hardness you have in your bore water? It depends on your water hardness level.
Regards.
@@CoolHomeTech 900ppm sir. Total hardness
Hi Dinesh
Hardness is bit higher side. I feel you need close to 10kg salt. This will increase regeneration time since you need to use close to 50 liters of water (for 10kg salt).
Also 50 liter softener is bit smaller I feel. For this hardness you need to perform two regeneration cycles per month. (Again depends on how much water you use per day)
Thank you.
@@CoolHomeTech sir, appreciate ur reply.. Thanks a lot. Your great work should continue.
Moin.. guter Beitrag! Thanks. :)
Hast du schon mal dieses spezielle Wasserstoffwasser von einem solchen Wasserstoff Generator jemals probiert?
Dieses Getränk ist echt richtig gut! :)
Wir trinken es vor allem Training !! ☺
Hi
Thanks for your comments also Thanks a lot for this additional information.
Regards
Thank you ,very informative
But one doubt sir,
Actually the regeneration in my house is done by the maintainence guy, he always make us turn onn the water pump before he starts and tells to turn off after it's done
Can you please explain why is that?
Because I'm planning to do it myself from now on.
Hi
The water pump must be ON throughout this process. You can do it yourselves for your house. Go through this video a few more times if you need it. You will master it within 2-3 attempts.
Regards
@@CoolHomeTech and I need help with another thing sir, in my case the step names around the multi-port handle have been erased as it's quite old.
Is there anyway I can figure out the slot names or do I have to experiment and find out what slot does what?.
Hi
Please send me an email to CoolHomeTechPraveen@gmail.com. we will discuss
Regards
@@CoolHomeTech thank you sir.
I have emailed and waiting for your response
@@CoolHomeTech hi Sir
Can you explain why in both process Rinse and Regeneration the system still using the pump but the flow rate of the regeneration is much lower than the rinse as can be seen in the video?
Also I see that the water coming from the height, is there any pump up there while on those processes?
What about 300 liters water softener
Tank
How many kilos Salt water
25 kg salt per 100 litres resin
Salt tank size ?
Could be 50 or 75 liters. Sufficient for dissolving 10-12 kg of salt in the water.
👌🏻
❤️
Hi sir iwant this item
Hi Shiva Sir
Could you please send me a mail to - coolhometechpraveen@gmail.com. I will send the contact details. Thank You
@@CoolHomeTech hi andi my nom 8187072703 plz send me details
Sir,can you give the contact no of this water softener.which brand.
Hi Shashi
Please email - CoolHomeTechPraveen@gmail.com. will send the details
Regards
ಮೋಟಾರ್ ಆನ್ ಮಾಡಿಟ್ಟು ಕೊಂಡು ನೀರು ಟ್ಯಾಂಕ್ ಗೆ ಹೋಗುತ್ತಿರಬೇಕಾದರೆ ಎಲ್ಲವನ್ನು ಆಪರೇಷನ್ ಮಾಡಬೇಕೆ ಅಥವ ಯಾವಾಗ ಮೋಟಾರ್ ಆಪ್ ಮಾಡಬೇಕು ಎಂಬುದನ್ನು ದಯಮಾಡಿ ತಿಳಿಸಬೇಕು
ನಮಸ್ತೇ
ಎಲ್ಲ ಕೆಲಸ ಮುಗಿಯುವ ತನಕ ಮೋಟಾರ್/ pump ಆನ್ ಆಗಿರಬೇಕು.
ಧನ್ಯವಾದ🙏
ತುಂಬಾ ಧನ್ಯವಾದಗಳು ಸರ್ ನಮಸ್ತೆ
Thank you sir good information
Nimma whatsapp number send madabauda
Swalpa dout clear madalikke sir
Hi Muneer
Thank you. Please email me your questions to CoolHomeTechPraveen@gmail.com
Give num sir
u r method is wrong in regeneration don't give wrong information to viewers contact me for more information
Hi sir can you share me your mail id to reach you
Hi
CoolHomeTechPraveen@gmail.com
Phone number Sri