Build Your Own DIY Soldering Fume Extractor || How to Make Fume Extractor by Using PC Fan
ฝัง
- เผยแพร่เมื่อ 15 ก.ค. 2021
- DIY Fume Extractor by using a 120mm PC cooling fan and 3D printed enclosure.
#diyFumeExtractor #3dpruntedFumeExtractor #opengreenenergy
This project is successfully completed because of the help and support from NextPCB. Guys if you have a PCB project, please visit their website and get exciting discounts and coupons.
Only 0$ for 5-10pcs PCB Prototypes：www.nextpcb.com/?code=greenen...
Register and get $100 from NextPCB: www.nextpcb.com/register?code....
See more info about PCB Assembly Capabilities: www.nextpcb.com/register?code....
Here are mid-summer sales at NextPCB :
1. Up to 30% off for the PCB orders
2. Up to 20% off for the PCBA orders
Download the STL files: www.thingiverse.com/thing:491...
Instructables Link: www.instructables.com/Build-Y...
If you are an electronics hobbyist, soldering is essential in almost all of your project, but the smoke/fumes from burnt solder and flux isn’t something you want to breathe. It smells bad and can be very dangerous to your health but you can reduce the hazards by employing a fume extractor. Even if you only solder things once in a while, it's a good idea to have a solder fume extractor to suck in those toxic fumes.
Credit:
I found online an amazing 3D printed model that I tweaked and customized in Autodesk Fusion360 according to my needs (source: "www.instructables.com/Minimal..." by rdmmkr used under CC BY-NC-SA 4.0 / Modifications: size, 120mm fan, speed control ).
CC BY-NC-SA 4.0: creativecommons.org/licenses/...
I have used a 120 x 25 mm fan whereas the original design is suitable for an 80 x 38 mm fan.
=====================================
Components Used:
1. 12V Fan: amzn.to/3rcaEpJ
2. DC Jack: amzn.to/2Ug8c5q
3. Rocker Switch 15 x 10 mm: amzn.to/36Lh4mf
4. 5mm LED: amzn.to/3kziI2r
5. Resistor - 580Ohm: amzn.to/3eAgE6u
6. 22 AWG Wires: amzn.to/3hVt4YV
7. Heatshrink Tube: amzn.to/2VYtmpf
8. Activated Carbon Filter: amzn.to/3evAcZG
9. Double-sided Tape: amzn.to/3ippWDq
10. M3 x 12 Screws: amzn.to/3kDJVB1
11. M5 x 8 Screws: amzn.to/2UVznTd
12. Rubber Feets: amzn.to/3y3mmW0
Tools Used:
1. Soldering Iron: amzn.to/3y3mmW0
2. 3D Printer: amzn.to/3Bfpgt7
3. Wire Cutter: amzn.to/3zcaama
4. Wire Stripper: amzn.to/3BfptfT
5. Hot Air Blower: amzn.to/3kA9d3c - วิทยาศาสตร์และเทคโนโลยี
Amazing 👍🏼👍🏼 and very cute
I just need a $300 3D printer to build my $20 fume extractor 😆
💪💪💪💪 very useful unit
Great build as always!
I'm impressed.. 🍒🍒🍒🍒💓💓💓💓
This is impressive
Thank you
Thanks for sharing
Very nice and very helpful project 👍👍 👍👏👍👏
Thank You dear
First view
Built one of these fume extractors a while back with a colleague. It really served us well a long time.
We didnt have a 3D Printer then so we used a wooden housing. Your build is really cooler. Big ups
Thank You dear
@@opengreenenergy Don't mention fam. Keep up the good work.
Well done! I’d like to build this myself. Do you think the speed control is really necessary? Seems like full speed on the fan should be fine.
Yeah, after making I have also realized, there is no requirement of speed controller. You can skip it
I like how you matched the colors of your soldering Iron with the fume extractor nice touch!. I agree no need for a speed controller since you want the fume extractor to suck as much fumes as possible that is why I prefer the simplicity of the original design, by rdmmkr www.thingiverse.com/thing:3474360.
Mr devashish Your work is excellent and super fine
Thank You
Sir your DIY projects are awesome 👌
Thank you dear
Super proffesional...
Thank you
Nice
Thanks sajid
Great project! You should really add a couple of 18650 battery's to it.
Thank you ☺️
Your feedback is appreciated.
Good design. One point I'll make is that it's generally not a good idea to insert tinned wires into screw down connectors like that. Over time, tinned wires can and will come loose from the connectors which can risk shorting out your components. Ideally you'd want to crimp connector pins to the ends of your wires like those found in dupont crimping sets.
Wooow kiale bay
You don't need an off/on switch because the speed controller can be used to turn it off/on. Try to turn it to the lowest speed and then continue to turn the knob and you will hear a click.
I’m excited to build this. Looking forward to your stl files!
Keep in touch, I will share the details with few days
www.thingiverse.com/thing:4910949
@@opengreenenergy Thank you, OGE!
👌👌👌👌
Good video, I have been looking for a 3D printable solder fume extractor. Though I will go with Jp Toto’s suggestion to remove the speed controller. Question when do you replace the filter?
Great project, will be printing one this weekend! Why no long to the variable speed control? Its also missing from the Instructables site.
Hello many days past over. When will you announce the 3d printer giveaway. Please reply
Please electrical components ka giveaway kijiya
Nice work. Subscribing as well. I would like to know about the 3D printer you use. Do you have a link as to where I can get one from?
Thanks. :)
printed your hood, but my fan is 120/120/25 mm. does not fit because I measured the size on the model, it turned out not 25 but 24 mm
It's due to printer tolerance which vary from printer to printer. No worry, sand the edges with sand paper.
Open Green Energy Ok ✅
OK let's see if you can do the impossible
Build bga rework station machine
Which cutting mat you use?
Hi sir, which soldering iron or kit you are using ! Thanks for the video
I am using Hakko Soldering Station.
Is there any store in India that sells lead free solder?
I saw a few on Amazon but all were fake
CNC machine buy kayse Kary jo aap use karty ho please link CNC laser machine buy please form India buy aur Bluetooth speaker bany form 3d printer main
Hi, I have nearly finished building my extractor. Wonder if you can help me? I don't have 580 OHm resistor, wich value can I use safely instead ? Many thanks
You can use any value above it and below 1k
Many thanks, will put a photo on instructables when finish
Just posted my photo on Instructables, Froggy86, many thanks again for your help
Looks great, i am going to do the same, thanks for giving everyone the blueprint to your 3D-Printed Soldering Fume Extractor.
Sir please giveaway a 3D Printer
No STL files?
I am writing an Instruactables , I will post all the details there soon
Good Solder fume Extractor, but one thing i do not like, that the top part cannot be screwed, i made a little 3D plate,
and put that on top with 4 little screws, because otherwise the top remained at a crack.