#108

Tees, Hoodies, Hats, Parts at : www.tatromachi...
donate here to support my channel
www.zellepay.com/ send to [e-mail]
/ tatro
www.paypal.com...
20230513161026 1
#108 1959 74ci panhead very hard starting kickstart tune up 38 mikuni new build harley tatro machine

[@josephkielbasa302]

I'm jealous of the people that get to work with you. Keep pushing cheers

[@romandybala]

Did this on an "unknown" rebuilt engine years ago. 4 weekends of kicking and popping.Turns out the pistons were fitted backwards and the cam timing was off. Redid the engine and set the timing and it started first kick. Was young then, didnt know much.It'll be in the timing.

[@kennethwise7108]

I've been a loyal subscriber for 10 years now and have never seen a bike kick Keenans a$$ like this before.

[@oldninjarider]

Reminds me of an old Clinton lawnmower with a rope cord starter we had when I was a kid. Once it started it ran but getting it to run took most of your Saturday.

[@alanmeyers3957]

This damn bike.

[@danjohnson4819]

I think the gas vents from the tank you have removed

[@h-dcnlimburg2007]

gascap venting?

[@kennethwise7108]

I sure don't miss those days sorry..

[@michaellfbvr]

Every time he kicks it over my abs tighten and I go uugh

[@billvandyne4685]

If that carb is a Mikuni 38mm VM-9, it should have an enrichener system on it. You shouldn't have to choke it with your hand. I can't tell from the video but could that carb be a Chinese knock-off? if it is the real deal the word "Mikuni' should be stamped into the metal on the left side of carburetor.

[@TatroMachine]

flooding a motor is one way to start one that does not want to start. what and how it deals with it gives you a clue on what to do next. you have to figuare out what it wants to start and what to do next after it does. its not like all i am doing is just kicking.
tatro

[@pony3538]

Doesn't help to have a compensator on a Kickstart

[@skippyyoung7872]

F#$% that kick start to old for that.. beautiful bike tho..🤘

[@hernandomunoz3445]

Not really a knowledgeable mechanic...
First check if there is spark on the spark plugs REMOVED and grounded, then if the carburetor is full of gas and fueling the cylinders, then you can prime the carburetor with starting fuel just to verify if it starts, buy you may want to check contact breaker points for correct timing...etc.

[@TatroMachine]

and you forgot the most important part, make sure the valves are closed and you have suction to pull the fuel in.
tatro