I love the way Americans & many others try and pronounce different Australia places or citys, Melbourne always gets the Jason Bourne treatment, Poor Melbourne.
In Sydney we now have an autonomous underground rail network, partly in operation and partly under construction. It is the same gauge as existing track but they made the carriages a different width. Why? Tasmania also has a tunnel about 3 miles long, dug by hand but most of Tasmania's rail network has been abandoned in favour of road transport. Australia is a really big island, covers the continental USA but is mostly desert or at least harsh country.
I am a 75 year old Australian, I worked in all areas depicted, I congratulate you on a very thorough & accurate depiction of Aus railway history. As a Tasmanian, appreciated your inclusion of their railway system which, due to geography, did not mimic the mainland.
@@floppycheese9369Highly doubtful. We have a old railway corridor here in the north east, beautiful scenery, 150 years old, decommissioned in 2004, soon to be ripped up for a railtrail that will rarely be used as shown with the current railtrail. Rediculous
@@SassyXR6007I think that if you offered a fully connected Launceston to Derby rail trail, it might get a lot more interest than the current section from Scottsdale to Tonganah. But both sides of that project seem to be counting on a lot of funding that may never be forthcoming. I would deeply love (and also believe we have an economic and environmental need) to bring back intercity passenger rail in Tas, but given the absolute opposition to public transport and anything not car-centric, I think we're shit outta luck.
The Pilbara is also home to the first totally battery electric mainline trains - with no external power. The battery is charged by dynamic braking on the run downhill to the port and the recovered charge used to drive the empty train back uphill to the mine.
@allangibson8494 this is incorrect. There are currently no battery electric locomotives in the Pilbara. All four operators have battery locos on order but none have arrived in the country yet and it will be a long time before the area is totally battery electric. The new battery electric locos are designed to be marshalled between two diesel locomotives and will not be able to operate on regenerative braking charging only.
@@MitchellFreeway Fortescue are going to run battery only (at least on a trial basis). Roy Hill, Rio Tinto and BHP are running a more conservative hybrid consist with Roy Hill taking delivery first before Christmas this year.
As an Australian, I must say this video is very accurate! Not many commentaries from international viewers come close to achieving this level of accuracy and coverage. A few minor inaccuracies such as pronunciations, but we can't all be perfect, and I'd even say you did better than most non-Australians would.
I always read through the comments before I watch a new creator or new style of video. And you just described me, so I guess I have to watch this one! 😅
I like the huge differences in American accents. The last video I watched was narrated by someone from Oregon - very different voice to this narrator. Both distinctively American but yet so different from one another.
I wrote part of the computer control system which loads iron ore on to trains on a pilbara mine. It took control of the engine off the driver and moved the train in sync with the ore loader. The train was so long a special radio communication tower was built on a hill top to ensure the required line of sight with the front of the train.
Greetings! Typing this while sitting in a Victorian electric broad gauge suburban train set. Australia’s gauge problem came about… wait for it… because of an Irishman, an Englishman and a Scotsman. All the states hired their own engineers, who built their networks to their native gauges back home. Throw in timber tramways, private lines as well and we have at least 4 gauges in Victoria alone. Great video!
If you include timber tramways, by my count there was 14 different gauges! And if you include the rest of Australia (timber tramways included), you get to an astonishing 34 different gauges!
Whenever I hear people saying we in the UK must have it easy for using only one gauge on the mainline, the first thing that comes to mind is the sheer horror of the yards at Didcot and Swindon, where the broad-gauge (Brunel) GWR connected to the standard-gauge (Stephenson) LNWR and a *lot* of multi-gauge track and pointwork had to be kept in check. 🤯 It's for this reason when the UK railways were unified then nationalised, one of the priorities for British Rail was gauge standardisation. They took out all of the GWR broad-gauge track for standard gauge as quickly as they could, and the benefit for the GWR routes is that three standard gauge tracks can fit in the same amount of space as two broad gauge ones, effectively increasing capacity by 50% in many places. 👍 But: The British approach (Of _„Just tear it all out“_ ) - Though practical - Does sadly mean that a lot of our early railway history has been lost to progress. I suppose though that is the British way... 🫖
And one of your 18th Century Dunderheads stated a Broad Gauge ( adopted by the British in Inda) would...wait for it.. USURP LAND!! Upto 1960 pax on Melb.to Port Augusta had to disembark 3 tines because if gauge issues. ( my dates could be wrong)..
The Australian Rail Track Corporation (ARTC) is actually a federal government owned statutory corporation with passenger services having priority over freight. Rail operators pay fees to ARTC for access to the network and ongoing operations and maintenance are built into the pricing structure. Additional funding is also provided by Government.
The comments betray the fact that nobody except for Australians cares about Australia. Nearly every comment on this video starts with, "as an Australian..." Lame country
Thanks for including my Cairns Rail Cement Train clip in your video! I’m very happy you credited my clip without just taking it without credit, I really appreciate it. Now for my comments, I wish you mentioned some more of Queensland’s railways because it’s so incredibly unique even aside the huge narrow gauge railway network. First of all our 2ft (610mm) gauge sugarcane trains are kinda crazy to think about. Thousands of kilometres worth of 2ft gauge track, spread over many extremely complicated networks north to south of the state. They operate with little to no signals at all and operated by radio communication instead! The only signals used are for catch points where 3ft 6in gauge crosses 610mm gauge and mill yards to indicate when a line of full or empty cane bins is ready for import or export. They also are incredibly unique as their large 2ft gauge rail networks are the only major tramway gauge railways in the world to operate a profitable business with millions of dollars of investment each year. Sugarcane train operations can also be very peculiar and sometimes even seem safety lacking at times. Trains with a crew of 2 are allowed the co-driver to hop out of the train while still moving, switch points or add things like tail sticks to the back of trains and get back on, yet again why the train is still moving! (Mostly at low speeds of course though😉) Also with some lines of particular sugarcane railways becoming so old that they have to use tractors to haul their train wagons! The ones I speak of are Victoria Mill’s “horse lines” in Ingham. Last thing I would like to mention about Queenslands sugarcane trains, quite a few of the new rebuilds of older locomotives are being equipped with remote control technology, so the driver can control the locomotive outside of the cab with a controller, useful for shunting especially around blind corners or areas where the driver cannot see very well while shunting. Also I would just like to mention the Kuranda Scenic Railway, which should’ve definitely gotten a mention in this video! It is an engineering marvel to say the least. They built the steep and mountainous railway line in incredibly harsh tropical rainforest conditions all the way back in 1891, carving 15 tunnels by hand, blasting away rock with dynamite and even having to dangle men from ropes to the cliff side to clear the way for the line. Over 30 people died to build the rather small length of 33 kilometres of track from Cairns to Kuranda. The construction of the railway has an incredibly fascinating history. Final thing I would like to mention… Queensland, despite operating on 3ft 6in (1,067mm) gauge has their own Beyer-Garratt too! It’s the Queensland Class, with 30 built from 1950-1951, measuring at 27.43m (90 ft) long. Only 1 of 30 is currently preserved. How those locomotives got around our narrow gauge network is beyond me! Anyway, great video. I really enjoyed it! It is awesome to see some representation for Australian railways.
I lived in Cairns on and off for over 10 years. Plus, Queensland, for most of my life, it is hard to explain how extensive the Cane Rail Network is to those unfamiliar. Also, it runs all day and night during the Crush. I lived amongst the cane and you hear the harvest and loading at night. It is impressive that these things exist and work!
@@kizzjd9578 Not really as I’ve only visited the Ingham mills once and the time I did visit, it was raining. But I did get to see their raw sugar trains, making Ingham’s mills the last of the Queensland sugar mills to transport their raw sugar to a bulk sugar terminal by 2ft gauge rail!
As a West Australian, I loved your appreciation for the Pilbara's railway network [pronounced pil-buh-ruh] but it would have been really nice if you mentioned WA's expansive railway, which are also in 1067mm NG track. Here in Perth, we have a wide array of trains and lines, we've developed much differently because of our isolation from the East.
I'm a blacksmith from Ipswich Queensland, two of my Anvils are from the Ipswich rail yards that were used to maintain all the steam locomotives in the south east. The rail yard is still in use today and has quite a decent collection of engines, some fully restored and others in various stages of restoration. Well worth the trip. Also if you ever visit, make sure to go to Dorrigo NSW, it holds the largest private collection of steam locomotives in the world. Hundreds of them back to back, it's a sight to behold.
The trans-Australian railway wasn't just approved, it was constitutionally required as one of Western Australia's demands in joining the Commonwealth of Australia alongside an accompanying telegraph cable. Also, I live along the line between Perth and Kalgoorlie so get to see some impressive trains go through fairly regularly.
That's funny, that was exactly the same story in Canada. British Columbia, the westernmost province here and where I live, wouldn't join Canada without the promise of a transcontinental railway. It was very difficult to accomplish, not just because of the extreme distance, but because there are many extremely tall mountains (including the Rocky Mountains) between here and the rest of the country. I got to ride all the way through to Toronto last year and experience firsthand just how much of a winding route they had to develop to get through them, with tunnels that sometimes loop over onto themselves.
@@DevynCairns similar to the blue mountains coming out of sydney. lots of tunnels. i used to live at woodford about halfway up the mountains and waiting for the normal passenger commute train at 5.20 am would often see the empty coal trains returning from delivering the coal to lithgow power station before heading back to singleton for a reload. they also have a steam train that runs occasionally and the historic zig zag railway i believe has just reopened after losing their buildings to the bush fires of 2019
You need to come and take a look at the Zig Zag railway in the Blue Mountains about 100 miles west of Sydney. Thie line was the original NSW Railways line over the mountains which was bypassed in 1910 by a 10 tunnel deviation with an easier grade. due to inability of the single line with its switchbacks to handle increasded traffic. The line was abandoned and torn up after it closed and at one stage a roadway used the formation and the tunnels were used to grow mushrooms. The Zig Zag Railway Co-Op (non profit) obtained the Right Of Way and set about progressively relaying track - to 3' 6" gauge (originally it was standard gauge) because they were unbable to source any standard gauge locos or carriages, and running trains for many years. After a devasting bushfire wiped them out some years ago they have now returned to full operation between Clarence (the highest staion on the line) and bottom points where they meet the new main line. The Zig Zag uses ex QR steam lcos and an eclectic mix of carriages from Tasmania, Western Australia, and South Australia (from the old Broken Hill to Port Pirie narrow gage line of the SAR). There is also the 2' 6" gauge Puffing Billy Railway near Melbourne - another icon with its tiny tank engines. Queensland is also home to the oldest working steam loco in the southern hemisphere - A10 #6, built in 1865 by Neilsons in Glasgow and shipped out to Australia in pieces. The loco is presently stored, operational, at Ipswhich Workshops. There is also a very short 2" 6" gauge line at Walhalla in Eastern Victoria called The Goldfields Railway and another of similar name in central Victoria running on broad gauge. There are many heritage steam locos on the ast coast, mainly in NSW and Victoria, though there are 2 or three in Queensland inluding "The yank", an AC16 class obtained from the usa during WW2..
Great you mentioned the Blue Mountains Zig Zag Railway as my family who always had free Australia-wide rail passes while my father was alive, travelled on this rather scary mountain zig zag railway section in the 1960's.
As an Aussie who is a sectionmen in Australia, I really enjoyed this. Even a good shot of a freighter coming over the old bridge in wallerawang which is a part of the track I look after was pretty dam cool. Thanks mate👍
I know this video was mainly focussed on freight lines, but as a Sydneysider, I've got to shout out the Tangara trains on our local rail network! Not only are they two storeys for maximum passenger seatage (as opposed to standing), but also those seats can be swung to face either direction, so you're practically never riding backwards! Also, when riding with friends in an empty enough train car, you can actually swing the chairs to fit up to 6 people facing each other 😊
@@jameswassink3218 Ah sorry, I'm not across the different models enough to know which is which! I just assumed they were all called Tangaras because that's what I've heard others refer to them as? My mistake!
brisbanite here, imagine my surprise going from our trains to the big double deckers in sydney! went for the first time earlier this year to visit my sister and she had to show me how the seats worked lol
I got to go to Bunderburg on the east coast. Huge sugar cane area. They use some small gauge trains to haul the crop to the sugar mill. the molasses is piped next door to the rum factory. Such a cool network.
"Bundaberg" actually @billybob803. Have been to the Rum factory, and the smell (steam)coming from the piped molasses is nauseating, though fascinating.
Thanks for an interesting video about Australian railways. Very enjoyable to watch. I am a locomotive engineer here in Australia. My career spans from working on the New South Wales Railway in the late seventies, eighties and nineties. I am currently working with Rio Tinto. I saw the introduction of the driverless trains. I worked many autonomous test trains, testing the driving strategies. The driving strategies were developed with locomotive engineers giving feedback on each of the test runs. The autonomous trains are working well. We have locomotive engineers, who go out to attend the autonomous trains. If they have any technical issues. We still have many human driven trains. Fuel trains, maintenance of way trains. We also drive the iron ore trains for training and qualification purposes on the various routes. If you or your viewers want to know more about Australian railways? Or the autonomous trains where I work. Please let me know.
Have you ever felt like transferring to BHP, FMG or Gina’s company where they still have drivers? There was a segment on TV where they showed that BHP were so short of drivers that they started a school in Port Hedland, but to me that was PR because they even had a woman on there who was a social worker with no mechanical experience whatsoever and they accepted her. I remember there was a woman who was a star on a TV entertainment show who they were training as a driver at Rio at Dampier, and apparently she was let go because her train handling was pretty awful.
Tons of American and European train videos, but Australian train videos? Watching something about Australia is like roaming around in heaven, thanks for this great video
The ore railroads are in Western Australia where it is very desolate. The only people that live out there are people that work for the ore company's. They make the train up as we do & then switch it over to driverless. There are cameras on board with someone monitoring them from a desk. It works there because there is very little human contact. Great video
Does it also have some form of kill switch? Say it it loses connection with dispatch, I imagine it automatically stopping and turning off would be a great safety measure.
@@mattevans4377 They do. My family has driven Rio Tinto trains over there for the last 10 years or so. Funnily enough the Driverless system over time performs about 30% worse than a driver due to all of the Stoppages on extremly busy tracks requiring a driver to drive hours to basically hit a reset button. When they upgraded their brake systems to electric activated for example with drivers his depot could move around 400-450 million tons a year. Previously with full pnumatic systems they did around 300-350 million tons. With the driverless they are back down to 300 million tons. Not to mention that the development costs would of paid for their whole driver staff for around 80 years. But I guess the theory is you roll it out elsewhere like Sierra Lione that they struggle to recruit staff for.
@mattevans4377 No remote kill switch but a remote derail ‘switch’ in the event of a runaway. You might like to TH-cam various news reports of ‘BHP Pilbara ore train derailment’ on the 6th Nov. 2018 . . . what a laugh , truly !
You know that driverless trains are common on metro rail throughout the world? I rode driverless units in Singapore a few weeks ago. Some important things are separation (grade separation, platform screen doors), and high-quality electronic signalling. I'd trust these to haul freight anywhere.
Grade separation for rail traffic of any kind is a good idea, most accidents on trains occur to things being on the rails that shouldn't, like cars, people and animals, people believe the drivers are going to prevent these kinds of accidents the reality is these kinds of accidents happen all the time. Cars on tracks get hit, that's why you don't stop on the tracks, blaming the train's driver or the driverless train is a useless point. Most trains move at a speed where a driver's reactions are not good enough to not hit things that block the tracks. It actually kinda hit a nerve with me when the video started going off on how bad of an idea driverless trains are, if you build a good system you don't need a driver. The problem is in America, where this mindset originated, we don't have a good rail system but not even drivers can fix it.
We area already talking about driverless cars, don't see why driverless trains should be a big problem, especially as a human driver are also often not able to break right in time.
There is one more motive power that i really want to point out. FMG in the early 2000s bought ex-UP SD90MAC-H2s, they're numbered in 900 series. They were rebuilt in NS's Juniata shops before going to FMG. I'm not sure if they're still using those or not. I believe they're still wearing their 6000hp 16-265H engines before being rebuilt with EMD's 710 engines at somepoint. My favorite was FMG 903, its an ex-UP 8539 which made a cameo in movie Unstoppable (2010)!
They ran a remote train on a short hop between Railton and Devonport, Tasmania carrying cement to port. A few years ago, it decided to go rogue and had to be intentionally derailed in the middle of town to prevent carnage at the terminus.
I have had two connections with railways in Australia. My father was a clerk (and the last few years a manager) in the old SAR (South Australian Railways) until it was taken over by the Commonwealth Railways to create Australian National Railways. My earliest memory of him at work was when he was the configuration controller for The Overland (then a 7 days a week nightly service between Adelaide and Melbourne on the broad gauge network, jointly owned by SAR/ANR and Victorian Railways. It is now operated by the tourist train operator that runs the Indian Pacific, Ghan etc. My dad also work on establishing adding sitting cars to the Indian Pacific from Peterborough (one end of the broad gauge network from Adelaide) to Sydney, and eventually all the way from Sydney to Perth. He use to be the co-ordinator of the steam trains until they were handed over to specialist groups. South Australia also had three gauges. The SAR’s main line was broad gauge (as was the city network in Adelaide), standard gauge across the middle where the Indian Pacific (and formerly Trans Australia) ran and then on Eyre Peninsula an isolated narrow gauge network. I said I would never work in the railways sector, but I was an executive with the Federal and State Governments creating National Rail Corporation, to take over all their interstate freight operations and turn around the $350 million loss per year in the sector. I was the head of Internal Audit so I ended up seeing across the entire business. We did the largest order of locomotives in Australia, ordering 120 units which made up most of the fleet until it was sold (now Pacific National). You can see these units pulling the Indian Pacific and The Ghan on contract to the private tourist train operator. One of the problems with getting the engines was weight limitations. Apart from some of the coal network in NSW, the tracks have lower weight limitations than say the USA. There are a couple of oddities. The government control track maintenance and service allocation provider has some network in NSW which does allow the heavier tracks for the Hunter Valley Coal to the Port of Newcastle which is a very complex network. In the end at NRC we decided not to purchases heavier engines for these tracks as it meant isolating locomotives to a particular area. As the various tracks in the Pilbara Region are developed and owned by the mining companies, and as you mentioned is an isolated system from any of the rest of the national system meant they built their track for heavier engines and rolling stock so are able to pretty much purchase off the locomotive manufactures in the USA catalogue! The other interesting part of working at NRC was the Federal Government project we were funded to undertake which was transforming the Melbourne to Adelaide route from broad gauge to standard gauge (which a different track our of Melbourne via Geelong and then getting back to the old mainline track). This created some challenge for passenger services in Adelaide which until recently their city network was Broad gauge (if I recall there was talk of when they were electrifying the network they would also convert to standard gauge, but I don’t know if that happened) and also in Melbourne more with their regional intercity network. I travelled on the old Ghan train, which was a broad gauge sit up passenger cars from Adelaide to Port Pirie (which was in motor cars - called the Blue Bird fleet), change their for an other sit up train (locomotive pulled) from Port Pirie to Oodnadatta, and then change to a narrow gauge network sleeper train from their to Alice Springs. I did this trip before they opened the standard gauge track from north west of Port Augusta on the Trans Australia track directly to Alice Springs and using similar carriages you see today (before the many modifications the private operator made). Whilst I was a kid/youth when my father was working at SAR/ANR a lot of our holidays were travelling interstate on various trains (The Overland - to Melbourne, the day train to Sydney etc). One thing missed is in the Blue Mountains out from Sydney is the steepest railway in the world. It is not that long, now is a tourist train, but originally was for coal. scenicworld.com.au/experience/scenic-railway
Visited Fremantle in 87 while in the US Navy and loved it. Friendliest people I met while on WESTPAC. We drank to the Queen! Love from Long Island NY USA. New Sub.
7:54 703 was retired and preserved at the national railway museum at Pt Adelaide 704 was preserved at the SteamRanger heritage railway 702 was scrapped And 701 was now named after his grace Tailem bend
Great video. Never seen this channel before, not a railroad guy but a general infrastructure guy. Always been fascinated with the logistics of Australian cross-country transit. Thanks for making this.
Even know this is more of an overview. This is definitely the most in-depth video about most of the rails you've covered. Be awesome if you'd do more! 6042 may still be in storage but I've had the pleasure of standing on the foot plate of 6029 just before she went through her trials to get back out there. Her and 3801 was a goddamn impressive sight to see thundering along side by side, only thing that could top that might be a big boy...maybe
The father of one of my classmates wound up buying 6029 a few years after this. The photos he (my classmate) showed made it look like a baby shunter, he never said just how big it was until I saw this video.
Congratulations! Like many of the viewers who’ve commented below, I was greatly impressed by your knowledge of Australian railways. You’ve obviously researched the subject extensively, and your passion comes through loud and clear. Well done! Just one friendly word by way of correction: Garratt is pronounced like “carrot” - not “Ger-rat”. Anyway, thanks for a great video, and keep up the excellent work!
There is a driverless metro line in Sydney, Australia. It's been operating for 4 ir 5 years now. Very interesting to ride in the front and look down tbe tracks as the train drives itself.
Left hand driver stands is standard practice in Australia; a pommy (UK) railway practice. Queensland and the Pilbara have adopted right hand stands. There are a few right hand stands in NSW, however, it is found on locos that have come from 'foreign' areas (Europe; MZs and Queensland; 2800s/3200s and 423s)
13:31 that train was actually 4 trains, each about 1800m (1.1 miles) long pulled by two engines, all connected together with two sets of drivers, lead and 3rd set.
Here’s a fun factoid for you from an Australian, five SD50 units in the US were actually built in Australia. In 1982, Hamersley Iron ordered five SD50 units (6060-6064) from Clyde Engineering in South Australia, who were EMD’s Australian licensee. These ran in the Pilbara until 1995 before being shipped to the US, all eventually going to the Utah Railway.
This is a breath of fresh air. With so much UK and USA railway information about, it can be hard to pin down a good understanding of something in my own backyard. Coal train regularly pass through my hometown in QLD, on the aforementioned narrow-gauge network. These mostly haul grain and coal.
You forgot about WA's own NG Network! Basically, apart from the Pilbara iron ore lines, we also had the WAGR (West Australian Government Railways) GSR (Great Southern) and MRWA (Midland Railway of WA) The GSR was merged into the WAGR early on and ran to albany, hence the old NG mainline's nickname "The Great Southern" The MRWA however, was regarded as WA's only privately run main line network which had roughly 4 classes of steam engines, and 3 classes of diesels. What made the railway unique in WA is the fact that only 1 of it's steam engines still exists in preservation today, all the others being scrapped. Perth also has a variety of trains and lines due to our isolation from over east. sure, the passenger EMU's used aren't exactly the most diverse, but the freight network on the otherhand has quite the array of different engines. We also have our only preserved line using steam engines in the winter months - the hotham valley. The reason why we don't run steam in summer is because Australia is prone to becoming like a desert in the heat, and we don't have to deal with snow in winter either, allowing better opportunity for steam operations
So pleased to have found this production, as an Aussie, and as the place is so vast, there is much that I had not heard or seen before. Well done, and 'mostly' done from overseas!
Whoa, that's interesting! Those Distances must be absolutely Mindboggling! Since a few Years we've got automatically Gauge changeing Trains here in Switzerland. They switch from 1000mm Narrowgauge to 1435mm Standardgauge and back. That Technology was created to get a Trainline from Luzern to Montreux without having to change Trains twice. Luzern-Interlaken is Narrowgauge with Sections of Cogwheel assistance, Interlaken-Zweisimmen is Standardgauge and Zweisimmen-Montreux is Narrowgauge again. They only have to put another Locomotive on in Front between Zweisimmen and Montreux, because it runs on 900V DC, whilst Luzern-Interlaken-Zweisimmen runs the usual, in europe widely used Standardcurrent of 15'000V AC at 15.6Hz Another speciality can be seen in Graubünden, eastern Switzerland, where there are Sections of Track running a 3-Rail-Setup, so Narrow- and Standardgauge Trains can use the same Track. It's also pretty common in Europe to have Locos capable of changing to multiple different currentsystems on the fly. It makes me often wonder why nobody else uses these Technologies, since they are available and running smoothly...
Great video. The different gauges in Australia was best described by American writer Mark Twain when travelling between Sydney and Melbourne. Having to change trains at Albury on the New South Wales/Victorian border. "Now comes a singular thing, the oddest thing, the strangest thing, the most unaccountable marvel that Australia can show," he wrote. "At the frontier between NSW and Victoria our multitude of passengers were routed out of their snug beds by lantern light in the morning in the biting cold to change cars. Think of the paralysis of intellect that gave that idea birth, imagine the boulder it emerged from, on some petrified legislator's shoulders."
Just another Australian here to say what a great job you did with this video. I am not a 'train guy', but do have an interest in rail & I certainly learnt a lot from this. Excellent.
If you want some coffee and waffles on an active fright line. Head to Spring Bluff in Toowoomba. It's a picturesque spot known for its beautifully landscaped gardens and historic railway station.
Dear to my heart - my GGG Grandfather came to Australia in the 1850s as a Sapper (Engineer) in the Military, and surveyed what is now known as the Zigzag railway (so named because it would change direction to work it's way up a mountain range) through the Blue Mountains west of Sydney. He went on to Survey much of New South Wales' rail network. His son was Chief Clerk (i.e.. CFO) of the NSW Railways. Early in my career I was involved in some of the earliest work on autonomous vehicles (Mine Haul Trucks, not Trains) with Rio Tinto.
Great video! Thanks! I live in geelong an hour from Melbourne. Every 2 years in March the Steamrail has their workshops open, it's an amazing day of up close to steam! Well worth checking out if you're around. Liked and subbed Skippy, cheers
Great video as an Aussie now living in California America I worked for the Victorian government railways at there Newport Railway Workshops originally as a boilermaker repairing rolling stock and constructing new rolling stock I moved from that job to become the Boilermaker Supervisor in the locomotive shop where they did minor to major repairs to full overhauls my crew did repairs or modifications to the locomotives, we took on the major smash repairs from collisions with other locomotives or with trucks or cars. So I learnt a lot about them and I had to write up estimates for my boiler makers repairs each trades supervisor would have to write an estimate for there jobs on the locos
I hope you do make it to the land down under, if you do I highly recommend you visit the rail museum in Ipswich QLD, there is a lot of interesting stuff there, plan at least 2-3 days, so you can take your time and really soak in all the exhibits. You won't see all of it in 1 day even if you rush and what rail enthusiast wants to rush past glancing at an exhibit and not read the detailed information boards? (I'm not even a rail enthusiast and it took me 3 visits to see everything I wanted to see)
Woolshed Flat is NOT in Victoria but in the mid north of SA. On the now Pichi Richie line which was part of the mainline to Darwin. Peterborough was literally the centre of Australian rail with all 3 guages serviced there. Huge turntable with all guages. I too was of the understanding that the convict railway went to Eaglehawk Neck.I can remember from the early 60s the route of the line. Though maybe not, maybe a horse and cart track.I have been there a dozen times since and nothing now.
Cool video. I note that Peterborough was mentioned due to having all 3 gauges, but up until the early '70s the break of gauge from broad gauge to narrow gauge was located at Terowie, which is about 15 miles south of Peterborough. IMHO the most interesting thing about Terowie is that it was where General MacArthur gave his famous "I shall return" speech during WWII.
Thanks for the interest in our railways, and great video! And it's always fun to hear people who haven't grown up with them trying to pronounce Australian place names. I'm sure you have a similar experience with American place names.
You have been misled - our roadtrains are nowhere neaqr 15 trailers anywhere. There was (IIRC) one bthat was set up in the middle of nowhere just to set the Guiness Book of World Records. Average outback road trains are just 4 trailers but there are some longer fule trains riunning between Darwin and AQlice SAprings that havfe up to 8 trailers but usually less.
I've had a serious interest in transport since joining the London Underground in 1976. I think this is an excellent introduction and summary of Australian railways. Good work.
Great vid...I'm in Tasmania , live in an ex rail cottage in a town that used to be the terminus of a very important branch line but was closed by dumb people in 1982..My dad was the last ganger (section track boss) out of St.Marys ...My house was built in 1886 and the fence to this day is posted by railway track.. The former rail station is now a museum with lots of rail memorabilia included... Your otherwise amazing vid has many places names spoken incorrectly but that's okay and very understandable of course ..Don't worry about that .. As you said this only is a taste of rail in this country but a great taste,,, One day also check our unique and very different road trains seen nowhere else in the world .. These road going behemoths often more than 160 ft long taking huge loads to places you won't believe . Aussie road trains are something else... Cheers to you
As someone who does consulting work for BHP WAIO Rail I enjoyed this. I even recognised one of the maintenance facilities at Nelson Point (Port Hedland). Nice one!
We run driverless trains from western Sydney into the city and are expanding the network. The Metro is quick, efficient and has never had an accident to date.
You should look into Queensland's narrow gauge heavy haul coal lines and its impressive trains. Queensland also has the worlds fastest narrow gauge train. Tasmania has the ABT on the westcoast. Those are very unique and the only ones operating steam ABT system daily. A follow up video is highly recommended. 👌
Queensland Rail is also the first in the modern world to adopt a 1067mm mainline from Brisbane to the far north. Most of them are at minimum, standard or broad gauge everywhere else
I really appreciated the incredible depth and width of knowledge in this video. As there always are small points to mention, The capital city of Victoria (Melbourne) is locally pronounced 'Melbn' with no long syllables.
please do a video on the porters steam loco the Japanese class d5, the Chinese QJ 2,10,2 or just exsamples of asian trains how do gear trains work something on saddle bolier and side tanks (like the big water boxes) tank engines double ended diesel trains what to do if the train stalls one talking about the different types of steam funnles and there uses, a video on steam locomotive combination breaks (steam and vacuum brakes) a short video on how a Armstrong turn table works what did train flagman do what did trains (mostly steam) do when going in tunnels, ive heard of gas masks or just useing a wet cloth, or did they bring in other engines like later on they used electric trains, or were there no bigv tunnels. evaluation of electric trains why are some trains wagion tops (the stream lining thing to boilers) railway terms abd slang one on the meaning of flag and lantern colors like green on rear engine means theres another one coming soon, the different types of cut offs/reversers/Johnson bar some are a big lever, some are a big valve wheel, and ive also seen some that are like rods, one exsample is train sim world 3 and im not sure where to find the other reverser and how much water do steam trains take usually, and how much would the crew drink
Very well researched and the covering of the main topics. Sydney NSW also has had driverless "Metro" passenger trains running for some time now with the network expanding. The Pilbara ore trains were also "Driver Only" for a number of years before technology made the driver redundant. Like in North America we have double stacked container trains running across from Goobang Junction NSW to Perth WA, there are many on my You Tube site. Just love the American pronunciation of some Australian names, left me laughing. Great work and thank you.😉
Might be worth checking out the inland rail project! Its a rail project linking a fgreight line between melbourne and QLD, it will be capable of having double decker transport trains the entire way!
As a brit this was a very interesting video thank you :) Just want to address your point about driveless trains. They do exsist elsewhere in the world, mostly on metro systems (I'm going to use london as and example as I know it best). The Victoria line which was built in the 60's has had driverless trains from the start (with an operator for the doors) which allows 36 trains per hour to operate in each direction. As for heavy rail, the crossrail project which links commuter lines from the east to the west has a "core" section under London where class 345 units are operated by a computer to enable 24 trains per hour in each direction. The same concept is applied north to south with Thameslink. The main reason for automation is simple. Speed. A human is not precise enough to know the exact millisecond to slam on the breaks to stop perfectly in the platform. Diverless trains are surprisingly safe.
You might want to explore two Queensland lines called the "Gulflander" a totally isolated line running from Normanton to Croydon in far northern Queensland as well as the "Savannahlander" which runs from Cairns to Forsayth, again in far northern Queensland. You won't believe the track they run on. Around every blind corner is a bull or a kangaroo lying on the tracks, sunning itself. Another line worth exploring is the "Old Ghan" the predecessor to the current Ghan. It' ran from Adelaide to Alice Springs on tracks almost as bad as the two Queensland ones.
You might want to have a look at the Normanton to Croyden line. AKA " The Red Rattler" Its totally isolated from the rest of Queenslands network and the "engine" has a gear shift.
Those fish bellied rails you showed near the beginning are from the Cromford and High Peak Railway in the UK which operated from 1825 to 1967, and a small section is still open today. You can walk or ride the majority of it. Those actual rails are at the top of Hopton Incline which was the steepest adhesion worked standard gauge railway line in the UK at 1in14 or 7.12%. Just up the road from where I live! Well worth googling as it was a mighty interesting railway!
Speaking of iron ore, you should do a video on the history of the DM&IR in Minnesota and the big Baldwin Yellowstone engines! They’re very interesting and actually more powerful than the Alco Big Boy engines (depending on your definition/parameters).
You can tell when one of Rio’s autonomous trains is coming to a road crossing because of the two blue lights on the cab, and it automatically gives a five second blast on the horns instead of whatever the driver felt like before. It felt weird seeing no driver and the sun blinds down, but we’re used to it now. Rio are GE stalwarts with North American manufactured locos, but BHP are exclusively EMD SD70ACe after the disastrous run with their GE AC6000s. BHP and FMG use one driver, they have had one person crews for decades. Incidentally, the newish ECP braking system was the cause of BHP’s 42,500 tonne runaway train in 2022 when train control in Pt Hedland had to forcibly derail it.
@gm16v149 BHP is all EMD now simply for standardization with locos and parts from one builder. It has nothing to do with a disastrous wreck with the AC6000s. In early 2011 BHP already announced plans to retire certain units, meanwhile replacements were already being shipped and constructed. All of that in phases.
yes i do have something i think you may have missed. Fortescue metal's infinity train. its a modern take on a gravity train using regenerative breaking to charge on the downhill with no extra charge needed to get back up to the mine when empty.
@@Southern_Plains_Railfan theres a 13minute video from the creator engineering with rosie called 'this mining train powers itself: the infinity train' if you want to cut copy paste and have a watch. for some reason youtube wont let me link it. all the best mate
I worked at Sigra rolling stock components in Penrith, Sydney for 11 years as the maintnance/fabrication man. I was pleased to see one of our brake hoses @10:59. I built the automated machine that cuts the hoses to length before crimping. Very well put together video, thanks.
I enjoyed the video. I was born and raised in Port Hedland up in the harsh Pilbara region. My dad used to run the ore car workshop back when it was Mt Newman mining while today it's BHP. Back in the old days it was easy to get into the main site where all the work is done to the trains and ore cars plus all the stackers and such. Loved seeing it each day when we got to go into the site to pick dad up from work. Walking into the massive workshops where dad worked and seeing the massive trains up close. Can't do that these days.
18:23 is my old home town of Lithgow, NSW, well known for Zig Zag Railway Also running big iron ore trains is Roy Hill Mine in the Pilbara WA, I am about to head over there for a mine shutdown again.
The Standard and Board gauge streamliners have always appealed to me. Naturally you have models which are basically elongated EMD and ALCo F-units, but I like how each standard and broad gauge system had their own specialty. Victoria has the double-ended B class, many of which were rebuilt as A class, which I believe are the only dual-cab Bulldogs that don't sacrafice the outline for loading gauge. New South Wales, in between the Bulldogs (42 class) and Flat (44) noses, you have the 43 class, probably the last produced remnant of the ALCo-GE partnership, as they resemble GE's UM20 cab units more than FA's. Then with South Australia, you have the 900 class. Resembling the ALCo PA's mostly, their innards are actually that of the first British mainline diesels. Oh and the Commonwealth Railways have the "CL" class, which are basically streamlined SD40-2's
I went to school in Brisbane in the 1980s, and we were taught that the reason why Queensland uses narrow gauge is because the treasury was robbed before construction started, so to make everything cheaper, narrow gauge was adopted. Dual Gauge was implemented during WW2 to help the war effort. But Standard Gauge only goes as far north as Roma Street in Brisbane, as far as I'm aware. Thanks for any corrections for stuff I've got wrong.
Hey brother, our sydney habour bridge had 4 lines going across it and i think in its first stage of design it was only going to be for trains and walk way, at some of the stations you can go down the lift and closely watch as you bypass a level and we have another station that has only platforms 3,4 ,5 ,6 the others where closed off and recently opened to public as a display. I am in my 40's now but growing up i remember we used to change trains between Melbourne and Sydney then at one stage it was change loco's then it was just direct.
The Harbour Bridge was always built to take cars, but also trains on one side and trams on the other, which it did have for some time. I'm not sure about the station with platforms 3 to 6, but perhaps that's Wynyard where the trams using the bridge terminated.
this could be right as well, the tram used the bricked tunnels at one end of the harbour bridge i will see if i can find a photo of the tunnels I am talking about but yeah it would be interesting to find where those tunnels go and what stations they went to ect.@@PJRayment
Excellent presentation. May I suggest a look at Steamtown in Peterborough, Pichi Richi Railway in Qourn, St.Kilda Tramways in St.Kilda and Steamranger at Victor Harbour. All in South Australia. For some history, look at Terowie in South Australia northern areas, one of the few remaining areas where all three gauges still exist and Port Pirie that still has Australia's longest rail platform. Adelaide is also home to the famous Ghan and midway point for the Indian Pacific. 👍👍🇭🇲
I went to Sydney back in 2005 and found that they have a subway that is heavy rail like a commuter train that goes through the city and is also a main line train travel also through the city and country side. i said that it's crazy. Like Having the The New York subway and NS/ CSX going through mid-town Manhattan. Great video Cheers mate!😃
As a Victorian and having worked with the Metro railway system it is sad to see that the state government opted for CCP developed and built trains for our suburban railway system.
Thank you for editing this video, as it's more work than people realize. Very well researched, with many relevant clips inserted to make it interesting.
Thank you I really enjoyed this, I live in the outback of Western Australia. Would love to see more as there is so much going on over here in transport. *you are one of the few that did his home work before posting.
Pardon my allergy-ridden voice, lol. SPR Drip- okieprint.com/SPR/shop/home
i think youre the only person with a southern accent that likes trains to this extent
I love the way Americans & many others try and pronounce different Australia places or citys, Melbourne always gets the Jason Bourne treatment, Poor Melbourne.
Very informative! Love watching stuff like this about trains and history.
@@trainanimator8150 Well, one who isn't a Blues musician.
In Sydney we now have an autonomous underground rail network, partly in operation and partly under construction. It is the same gauge as existing track but they made the carriages a different width. Why? Tasmania also has a tunnel about 3 miles long, dug by hand but most of Tasmania's rail network has been abandoned in favour of road transport.
Australia is a really big island, covers the continental USA but is mostly desert or at least harsh country.
I am a 75 year old Australian, I worked in all areas depicted, I congratulate you on a very thorough & accurate depiction of Aus railway history. As a Tasmanian, appreciated your inclusion of their railway system which, due to geography, did not mimic the mainland.
Hopefully Tasmania can get a public railway back soon 👍
@@floppycheese9369Highly doubtful. We have a old railway corridor here in the north east, beautiful scenery, 150 years old, decommissioned in 2004, soon to be ripped up for a railtrail that will rarely be used as shown with the current railtrail. Rediculous
@@SassyXR6007I think that if you offered a fully connected Launceston to Derby rail trail, it might get a lot more interest than the current section from Scottsdale to Tonganah. But both sides of that project seem to be counting on a lot of funding that may never be forthcoming.
I would deeply love (and also believe we have an economic and environmental need) to bring back intercity passenger rail in Tas, but given the absolute opposition to public transport and anything not car-centric, I think we're shit outta luck.
I see this comment and am immediately hitting download xD
SHUTTUP TASMANIA
The Pilbara is also home to the first totally battery electric mainline trains - with no external power. The battery is charged by dynamic braking on the run downhill to the port and the recovered charge used to drive the empty train back uphill to the mine.
That's a clever way to do battery-electric propulsion. Thanks for the small fact.
They probably did it that way so they don’t have to ship fuel in. With how remote that area is I can’t imagine importing fuel is cheap
@@appleintosh Actually fuel in the Pilbara is cheaper than in Perth - closer to the refinery in Singapore.
@allangibson8494 this is incorrect. There are currently no battery electric locomotives in the Pilbara. All four operators have battery locos on order but none have arrived in the country yet and it will be a long time before the area is totally battery electric. The new battery electric locos are designed to be marshalled between two diesel locomotives and will not be able to operate on regenerative braking charging only.
@@MitchellFreeway Fortescue are going to run battery only (at least on a trial basis).
Roy Hill, Rio Tinto and BHP are running a more conservative hybrid consist with Roy Hill taking delivery first before Christmas this year.
As an Australian, I must say this video is very accurate! Not many commentaries from international viewers come close to achieving this level of accuracy and coverage. A few minor inaccuracies such as pronunciations, but we can't all be perfect, and I'd even say you did better than most non-Australians would.
I keep cringing at the pronounciation of names.....Other than that, and a couple of skipped parts its actually pretty accurate.
And some Aussies 🤣
@@loeysmob It's pronounced Pill-Bra....
@@thedave7760 well duh. I never said it was pronunced any other way. 🤣🤣
@@loeysmob Lachlan got me. Most of it all just in the middle of nowhere.
As an Aussie (who is not really into trains} i found this very interesting and your narrating very soothing to listen to : )
Thank you!
I always read through the comments before I watch a new creator or new style of video.
And you just described me, so I guess I have to watch this one! 😅
that southern drawl! 😀
Bro I think you're just autistic fam lmao
I like the huge differences in American accents. The last video I watched was narrated by someone from Oregon - very different voice to this narrator. Both distinctively American but yet so different from one another.
I wrote part of the computer control system which loads iron ore on to trains on a pilbara mine. It took control of the engine off the driver and moved the train in sync with the ore loader. The train was so long a special radio communication tower was built on a hill top to ensure the required line of sight with the front of the train.
Greetings! Typing this while sitting in a Victorian electric broad gauge suburban train set. Australia’s gauge problem came about… wait for it… because of an Irishman, an Englishman and a Scotsman. All the states hired their own engineers, who built their networks to their native gauges back home. Throw in timber tramways, private lines as well and we have at least 4 gauges in Victoria alone. Great video!
If you include timber tramways, by my count there was 14 different gauges! And if you include the rest of Australia (timber tramways included), you get to an astonishing 34 different gauges!
The bit about engineers is somewhat true, but not really accurate. But I'll put that in a separate comment.
Whenever I hear people saying we in the UK must have it easy for using only one gauge on the mainline, the first thing that comes to mind is the sheer horror of the yards at Didcot and Swindon, where the broad-gauge (Brunel) GWR connected to the standard-gauge (Stephenson) LNWR and a *lot* of multi-gauge track and pointwork had to be kept in check. 🤯
It's for this reason when the UK railways were unified then nationalised, one of the priorities for British Rail was gauge standardisation. They took out all of the GWR broad-gauge track for standard gauge as quickly as they could, and the benefit for the GWR routes is that three standard gauge tracks can fit in the same amount of space as two broad gauge ones, effectively increasing capacity by 50% in many places. 👍
But: The British approach (Of _„Just tear it all out“_ ) - Though practical - Does sadly mean that a lot of our early railway history has been lost to progress. I suppose though that is the British way... 🫖
Patty Englishman Patty Irishman and Patty Scotsman strike again.
And one of your 18th Century Dunderheads stated a Broad Gauge ( adopted by the British in Inda) would...wait for it..
USURP LAND!! Upto 1960 pax on Melb.to Port Augusta had to disembark 3 tines because if gauge issues. ( my dates could be wrong)..
The Australian Rail Track Corporation (ARTC) is actually a federal government owned statutory corporation with passenger services having priority over freight. Rail operators pay fees to ARTC for access to the network and ongoing operations and maintenance are built into the pricing structure. Additional funding is also provided by Government.
except for the east west line which freight gets the priority as the indian pacific only runs each way once a week.
I’m Australian and didn’t know half of the stuff you went though in this video. Really great work, loved it!
Thank you! Glad I could help you learn something new!
The comments betray the fact that nobody except for Australians cares about Australia.
Nearly every comment on this video starts with, "as an Australian..."
Lame country
Thanks for including my Cairns Rail Cement Train clip in your video! I’m very happy you credited my clip without just taking it without credit, I really appreciate it.
Now for my comments, I wish you mentioned some more of Queensland’s railways because it’s so incredibly unique even aside the huge narrow gauge railway network.
First of all our 2ft (610mm) gauge sugarcane trains are kinda crazy to think about. Thousands of kilometres worth of 2ft gauge track, spread over many extremely complicated networks north to south of the state. They operate with little to no signals at all and operated by radio communication instead! The only signals used are for catch points where 3ft 6in gauge crosses 610mm gauge and mill yards to indicate when a line of full or empty cane bins is ready for import or export. They also are incredibly unique as their large 2ft gauge rail networks are the only major tramway gauge railways in the world to operate a profitable business with millions of dollars of investment each year.
Sugarcane train operations can also be very peculiar and sometimes even seem safety lacking at times. Trains with a crew of 2 are allowed the co-driver to hop out of the train while still moving, switch points or add things like tail sticks to the back of trains and get back on, yet again why the train is still moving! (Mostly at low speeds of course though😉)
Also with some lines of particular sugarcane railways becoming so old that they have to use tractors to haul their train wagons! The ones I speak of are Victoria Mill’s “horse lines” in Ingham. Last thing I would like to mention about Queenslands sugarcane trains, quite a few of the new rebuilds of older locomotives are being equipped with remote control technology, so the driver can control the locomotive outside of the cab with a controller, useful for shunting especially around blind corners or areas where the driver cannot see very well while shunting.
Also I would just like to mention the Kuranda Scenic Railway, which should’ve definitely gotten a mention in this video! It is an engineering marvel to say the least. They built the steep and mountainous railway line in incredibly harsh tropical rainforest conditions all the way back in 1891, carving 15 tunnels by hand, blasting away rock with dynamite and even having to dangle men from ropes to the cliff side to clear the way for the line. Over 30 people died to build the rather small length of 33 kilometres of track from Cairns to Kuranda. The construction of the railway has an incredibly fascinating history.
Final thing I would like to mention… Queensland, despite operating on 3ft 6in (1,067mm) gauge has their own Beyer-Garratt too! It’s the Queensland Class, with 30 built from 1950-1951, measuring at 27.43m (90 ft) long. Only 1 of 30 is currently preserved. How those locomotives got around our narrow gauge network is beyond me!
Anyway, great video. I really enjoyed it! It is awesome to see some representation for Australian railways.
I lived in Cairns on and off for over 10 years. Plus, Queensland, for most of my life, it is hard to explain how extensive the Cane Rail Network is to those unfamiliar. Also, it runs all day and night during the Crush. I lived amongst the cane and you hear the harvest and loading at night. It is impressive that these things exist and work!
@@AusJimBob Certainly! During cane season, if you drive around cane fields it is practically guaranteed to see a harvester or train at work.
Any more info about the vic mill? I regularly drive pst it and have got some nice aerial videos of it recently.
@@kizzjd9578 Not really as I’ve only visited the Ingham mills once and the time I did visit, it was raining. But I did get to see their raw sugar trains, making Ingham’s mills the last of the Queensland sugar mills to transport their raw sugar to a bulk sugar terminal by 2ft gauge rail!
As a West Australian, I loved your appreciation for the Pilbara's railway network [pronounced pil-buh-ruh] but it would have been really nice if you mentioned WA's expansive railway, which are also in 1067mm NG track. Here in Perth, we have a wide array of trains and lines, we've developed much differently because of our isolation from the East.
I read "as a wet australian".
@@theothertonydutch 💀💀
By isolation from the East do you mean by eastern Australia or eastern countries?
@@BigBushWookie The Eastern Aussie states of Victoria, NSW AND Queensland.
Settlers all of you so called Australians. You are from Europe and you are bred from convicts.
I'm a blacksmith from Ipswich Queensland, two of my Anvils are from the Ipswich rail yards that were used to maintain all the steam locomotives in the south east. The rail yard is still in use today and has quite a decent collection of engines, some fully restored and others in various stages of restoration.
Well worth the trip.
Also if you ever visit, make sure to go to Dorrigo NSW, it holds the largest private collection of steam locomotives in the world. Hundreds of them back to back, it's a sight to behold.
Also Ipswich to Grandview was the first railway in QLD ....
@@MrMotorNerd sure was, I'm very lucky to live here
The trans-Australian railway wasn't just approved, it was constitutionally required as one of Western Australia's demands in joining the Commonwealth of Australia alongside an accompanying telegraph cable. Also, I live along the line between Perth and Kalgoorlie so get to see some impressive trains go through fairly regularly.
That's funny, that was exactly the same story in Canada. British Columbia, the westernmost province here and where I live, wouldn't join Canada without the promise of a transcontinental railway. It was very difficult to accomplish, not just because of the extreme distance, but because there are many extremely tall mountains (including the Rocky Mountains) between here and the rest of the country. I got to ride all the way through to Toronto last year and experience firsthand just how much of a winding route they had to develop to get through them, with tunnels that sometimes loop over onto themselves.
@@DevynCairns similar to the blue mountains coming out of sydney. lots of tunnels. i used to live at woodford about halfway up the mountains and waiting for the normal passenger commute train at 5.20 am would often see the empty coal trains returning from delivering the coal to lithgow power station before heading back to singleton for a reload. they also have a steam train that runs occasionally and the historic zig zag railway i believe has just reopened after losing their buildings to the bush fires of 2019
@@gregorturner9421 the Rocky Mountains are just a tad bigger, but yes it's the same principle 😉
@@DevynCairns just a tad lol, ive seen videos of some of the rail line in the rockies and wow some of the bridges are insane.
You need to come and take a look at the Zig Zag railway in the Blue Mountains about 100 miles west of Sydney. Thie line was the original NSW Railways line over the mountains which was bypassed in 1910 by a 10 tunnel deviation with an easier grade. due to inability of the single line with its switchbacks to handle increasded traffic. The line was abandoned and torn up after it closed and at one stage a roadway used the formation and the tunnels were used to grow mushrooms. The Zig Zag Railway Co-Op (non profit) obtained the Right Of Way and set about progressively relaying track - to 3' 6" gauge (originally it was standard gauge) because they were unbable to source any standard gauge locos or carriages, and running trains for many years. After a devasting bushfire wiped them out some years ago they have now returned to full operation between Clarence (the highest staion on the line) and bottom points where they meet the new main line. The Zig Zag uses ex QR steam lcos and an eclectic mix of carriages from Tasmania, Western Australia, and South Australia (from the old Broken Hill to Port Pirie narrow gage line of the SAR). There is also the 2' 6" gauge Puffing Billy Railway near Melbourne - another icon with its tiny tank engines. Queensland is also home to the oldest working steam loco in the southern hemisphere - A10 #6, built in 1865 by Neilsons in Glasgow and shipped out to Australia in pieces. The loco is presently stored, operational, at Ipswhich Workshops. There is also a very short 2" 6" gauge line at Walhalla in Eastern Victoria called The Goldfields Railway and another of similar name in central Victoria running on broad gauge. There are many heritage steam locos on the ast coast, mainly in NSW and Victoria, though there are 2 or three in Queensland inluding "The yank", an AC16 class obtained from the usa during WW2..
Great you mentioned the Blue Mountains Zig Zag Railway as my family who always had free Australia-wide rail passes while my father was alive, travelled on this rather scary mountain zig zag railway section in the 1960's.
you missed the west coast wilderness railway in Tasmania that is the steepest rack and pinion railway in the southern hemisphere
The Zig Zag is one of my favourite routes to film and photograph.
@@Tascountrygirl The zig zag was closed in 1910 and reopened as a tourist railway in 1975, so there couldn't have been any trains on it in the 60s...
As an Aussie who is a sectionmen in Australia, I really enjoyed this. Even a good shot of a freighter coming over the old bridge in wallerawang which is a part of the track I look after was pretty dam cool. Thanks mate👍
I know this video was mainly focussed on freight lines, but as a Sydneysider, I've got to shout out the Tangara trains on our local rail network! Not only are they two storeys for maximum passenger seatage (as opposed to standing), but also those seats can be swung to face either direction, so you're practically never riding backwards! Also, when riding with friends in an empty enough train car, you can actually swing the chairs to fit up to 6 people facing each other 😊
The vast majority of Tangaras don't have reversible seats. Every other train in Sydney does however!
@@jameswassink3218 Ah sorry, I'm not across the different models enough to know which is which! I just assumed they were all called Tangaras because that's what I've heard others refer to them as? My mistake!
@@Respectable_UsernameTangaras are the ones with the upper floor windows that extend to the 45 degree angle in the roof.
brisbanite here, imagine my surprise going from our trains to the big double deckers in sydney! went for the first time earlier this year to visit my sister and she had to show me how the seats worked lol
I got to go to Bunderburg on the east coast. Huge sugar cane area. They use some small gauge trains to haul the crop to the sugar mill. the molasses is piped next door to the rum factory. Such a cool network.
"Bundaberg" actually @billybob803. Have been to the Rum factory, and the smell (steam)coming from the piped molasses is nauseating, though fascinating.
@@johnstaring3210 Bundaberg Rum is horrible. I don't know how anyone can actually like it.
Thanks for an interesting video about Australian railways. Very enjoyable to watch.
I am a locomotive engineer here in Australia. My career spans from working on the New South Wales Railway in the late seventies, eighties and nineties.
I am currently working with Rio Tinto.
I saw the introduction of the driverless trains.
I worked many autonomous test trains, testing the driving strategies. The driving strategies were developed with locomotive engineers giving feedback on each of the test runs.
The autonomous trains are working well. We have locomotive engineers, who go out to attend the autonomous trains. If they have any technical issues.
We still have many human driven trains.
Fuel trains, maintenance of way trains. We also drive the iron ore trains for training and qualification purposes on the various routes.
If you or your viewers want to know more about Australian railways? Or the autonomous trains where I work.
Please let me know.
Have you ever felt like transferring to BHP, FMG or Gina’s company where they still have drivers? There was a segment on TV where they showed that BHP were so short of drivers that they started a school in Port Hedland, but to me that was PR because they even had a woman on there who was a social worker with no mechanical experience whatsoever and they accepted her. I remember there was a woman who was a star on a TV entertainment show who they were training as a driver at Rio at Dampier, and apparently she was let go because her train handling was pretty awful.
You’re name is familiar. I think I’ve worked with your brother a few times.
Mate, to summarise that amount of our rail history in 19:26 minutes is a cracking (very good) effort worthy of 2 thumbs up 👍👍. New subby here as well.
Tons of American and European train videos, but Australian train videos? Watching something about Australia is like roaming around in heaven, thanks for this great video
The ore railroads are in Western Australia where it is very desolate. The only people that live out there are people that work for the ore company's. They make the train up as we do & then switch it over to driverless. There are cameras on board with someone monitoring them from a desk. It works there because there is very little human contact. Great video
Does it also have some form of kill switch? Say it it loses connection with dispatch, I imagine it automatically stopping and turning off would be a great safety measure.
@@mattevans4377 They do. My family has driven Rio Tinto trains over there for the last 10 years or so. Funnily enough the Driverless system over time performs about 30% worse than a driver due to all of the Stoppages on extremly busy tracks requiring a driver to drive hours to basically hit a reset button. When they upgraded their brake systems to electric activated for example with drivers his depot could move around 400-450 million tons a year. Previously with full pnumatic systems they did around 300-350 million tons. With the driverless they are back down to 300 million tons. Not to mention that the development costs would of paid for their whole driver staff for around 80 years. But I guess the theory is you roll it out elsewhere like Sierra Lione that they struggle to recruit staff for.
@mattevans4377 No remote kill switch but a remote derail ‘switch’ in the event of a runaway.
You might like to TH-cam various news reports of ‘BHP Pilbara ore train derailment’ on the 6th Nov. 2018 . . . what a laugh , truly !
@@mattevans4377they switch the trains to a track where they can be safely derailed
@@tuggaworsley4281.my son worked for bhp in the computer control centre
You know that driverless trains are common on metro rail throughout the world? I rode driverless units in Singapore a few weeks ago. Some important things are separation (grade separation, platform screen doors), and high-quality electronic signalling. I'd trust these to haul freight anywhere.
The expanding new metro system in Sydney is driverless as well (I think managed by the Hong Kong operator)
We tried it. Had the problem of them hitting cars until they put the operator back in.
Also common in Kuala Lumpur, Malaysia; a bit of a shock at first time seeing no driver.
Grade separation for rail traffic of any kind is a good idea, most accidents on trains occur to things being on the rails that shouldn't, like cars, people and animals, people believe the drivers are going to prevent these kinds of accidents the reality is these kinds of accidents happen all the time. Cars on tracks get hit, that's why you don't stop on the tracks, blaming the train's driver or the driverless train is a useless point. Most trains move at a speed where a driver's reactions are not good enough to not hit things that block the tracks.
It actually kinda hit a nerve with me when the video started going off on how bad of an idea driverless trains are, if you build a good system you don't need a driver. The problem is in America, where this mindset originated, we don't have a good rail system but not even drivers can fix it.
We area already talking about driverless cars, don't see why driverless trains should be a big problem, especially as a human driver are also often not able to break right in time.
There is one more motive power that i really want to point out. FMG in the early 2000s bought ex-UP SD90MAC-H2s, they're numbered in 900 series. They were rebuilt in NS's Juniata shops before going to FMG. I'm not sure if they're still using those or not. I believe they're still wearing their 6000hp 16-265H engines before being rebuilt with EMD's 710 engines at somepoint. My favorite was FMG 903, its an ex-UP 8539 which made a cameo in movie Unstoppable (2010)!
They ran a remote train on a short hop between Railton and Devonport, Tasmania carrying cement to port. A few years ago, it decided to go rogue and had to be intentionally derailed in the middle of town to prevent carnage at the terminus.
I have had two connections with railways in Australia. My father was a clerk (and the last few years a manager) in the old SAR (South Australian Railways) until it was taken over by the Commonwealth Railways to create Australian National Railways. My earliest memory of him at work was when he was the configuration controller for The Overland (then a 7 days a week nightly service between Adelaide and Melbourne on the broad gauge network, jointly owned by SAR/ANR and Victorian Railways. It is now operated by the tourist train operator that runs the Indian Pacific, Ghan etc. My dad also work on establishing adding sitting cars to the Indian Pacific from Peterborough (one end of the broad gauge network from Adelaide) to Sydney, and eventually all the way from Sydney to Perth. He use to be the co-ordinator of the steam trains until they were handed over to specialist groups.
South Australia also had three gauges. The SAR’s main line was broad gauge (as was the city network in Adelaide), standard gauge across the middle where the Indian Pacific (and formerly Trans Australia) ran and then on Eyre Peninsula an isolated narrow gauge network.
I said I would never work in the railways sector, but I was an executive with the Federal and State Governments creating National Rail Corporation, to take over all their interstate freight operations and turn around the $350 million loss per year in the sector. I was the head of Internal Audit so I ended up seeing across the entire business.
We did the largest order of locomotives in Australia, ordering 120 units which made up most of the fleet until it was sold (now Pacific National). You can see these units pulling the Indian Pacific and The Ghan on contract to the private tourist train operator.
One of the problems with getting the engines was weight limitations. Apart from some of the coal network in NSW, the tracks have lower weight limitations than say the USA. There are a couple of oddities. The government control track maintenance and service allocation provider has some network in NSW which does allow the heavier tracks for the Hunter Valley Coal to the Port of Newcastle which is a very complex network. In the end at NRC we decided not to purchases heavier engines for these tracks as it meant isolating locomotives to a particular area.
As the various tracks in the Pilbara Region are developed and owned by the mining companies, and as you mentioned is an isolated system from any of the rest of the national system meant they built their track for heavier engines and rolling stock so are able to pretty much purchase off the locomotive manufactures in the USA catalogue!
The other interesting part of working at NRC was the Federal Government project we were funded to undertake which was transforming the Melbourne to Adelaide route from broad gauge to standard gauge (which a different track our of Melbourne via Geelong and then getting back to the old mainline track). This created some challenge for passenger services in Adelaide which until recently their city network was Broad gauge (if I recall there was talk of when they were electrifying the network they would also convert to standard gauge, but I don’t know if that happened) and also in Melbourne more with their regional intercity network.
I travelled on the old Ghan train, which was a broad gauge sit up passenger cars from Adelaide to Port Pirie (which was in motor cars - called the Blue Bird fleet), change their for an other sit up train (locomotive pulled) from Port Pirie to Oodnadatta, and then change to a narrow gauge network sleeper train from their to Alice Springs. I did this trip before they opened the standard gauge track from north west of Port Augusta on the Trans Australia track directly to Alice Springs and using similar carriages you see today (before the many modifications the private operator made).
Whilst I was a kid/youth when my father was working at SAR/ANR a lot of our holidays were travelling interstate on various trains (The Overland - to Melbourne, the day train to Sydney etc).
One thing missed is in the Blue Mountains out from Sydney is the steepest railway in the world. It is not that long, now is a tourist train, but originally was for coal.
scenicworld.com.au/experience/scenic-railway
Drive thru Peterborough/ Peterburgh weekly. Great display of Steam Trains.
Visited Fremantle in 87 while in the US Navy and loved it. Friendliest people I met while on WESTPAC. We drank to the Queen! Love from Long Island NY USA. New Sub.
7:54 703 was retired and preserved at the national railway museum at Pt Adelaide
704 was preserved at the SteamRanger heritage railway
702 was scrapped
And 701 was now named after his grace Tailem bend
Great video. Never seen this channel before, not a railroad guy but a general infrastructure guy. Always been fascinated with the logistics of Australian cross-country transit. Thanks for making this.
Even know this is more of an overview. This is definitely the most in-depth video about most of the rails you've covered. Be awesome if you'd do more!
6042 may still be in storage but I've had the pleasure of standing on the foot plate of 6029 just before she went through her trials to get back out there. Her and 3801 was a goddamn impressive sight to see thundering along side by side, only thing that could top that might be a big boy...maybe
The father of one of my classmates wound up buying 6029 a few years after this. The photos he (my classmate) showed made it look like a baby shunter, he never said just how big it was until I saw this video.
I live in australia and I must say this is the most accurate train vid of australian trains to date. Excellent, excellent video, keep the good work.
Congratulations! Like many of the viewers who’ve commented below, I was greatly impressed by your knowledge of Australian railways. You’ve obviously researched the subject extensively, and your passion comes through loud and clear. Well done! Just one friendly word by way of correction: Garratt is pronounced like “carrot” - not “Ger-rat”. Anyway, thanks for a great video, and keep up the excellent work!
There is a driverless metro line in Sydney, Australia. It's been operating for 4 ir 5 years now. Very interesting to ride in the front and look down tbe tracks as the train drives itself.
Wow, those folks in Australia do have some unique train equipment. I also want to visit one day. Thanks!
Left hand driver stands is standard practice in Australia; a pommy (UK) railway practice. Queensland and the Pilbara have adopted right hand stands. There are a few right hand stands in NSW, however, it is found on locos that have come from 'foreign' areas (Europe; MZs and Queensland; 2800s/3200s and 423s)
13:31 that train was actually 4 trains, each about 1800m (1.1 miles) long pulled by two engines, all connected together with two sets of drivers, lead and 3rd set.
Here’s a fun factoid for you from an Australian, five SD50 units in the US were actually built in Australia.
In 1982, Hamersley Iron ordered five SD50 units (6060-6064) from Clyde Engineering in South Australia, who were EMD’s Australian licensee. These ran in the Pilbara until 1995 before being shipped to the US, all eventually going to the Utah Railway.
As someone who lives in utah thats incredibly cool info to know
This is a breath of fresh air. With so much UK and USA railway information about, it can be hard to pin down a good understanding of something in my own backyard. Coal train regularly pass through my hometown in QLD, on the aforementioned narrow-gauge network. These mostly haul grain and coal.
You forgot about WA's own NG Network!
Basically, apart from the Pilbara iron ore lines, we also had the WAGR (West Australian Government Railways) GSR (Great Southern) and MRWA (Midland Railway of WA)
The GSR was merged into the WAGR early on and ran to albany, hence the old NG mainline's nickname "The Great Southern"
The MRWA however, was regarded as WA's only privately run main line network which had roughly 4 classes of steam engines, and 3 classes of diesels. What made the railway unique in WA is the fact that only 1 of it's steam engines still exists in preservation today, all the others being scrapped.
Perth also has a variety of trains and lines due to our isolation from over east. sure, the passenger EMU's used aren't exactly the most diverse, but the freight network on the otherhand has quite the array of different engines.
We also have our only preserved line using steam engines in the winter months - the hotham valley. The reason why we don't run steam in summer is because Australia is prone to becoming like a desert in the heat, and we don't have to deal with snow in winter either, allowing better opportunity for steam operations
Back in 2007, I used the driverless tube in Turin. Seemed to work great
0:24 I like that map.
So pleased to have found this production, as an Aussie, and as the place is so vast, there is much that I had not heard or seen before. Well done, and 'mostly' done from overseas!
Whoa, that's interesting! Those Distances must be absolutely Mindboggling!
Since a few Years we've got automatically Gauge changeing Trains here in Switzerland. They switch from 1000mm Narrowgauge to 1435mm Standardgauge and back. That Technology was created to get a Trainline from Luzern to Montreux without having to change Trains twice. Luzern-Interlaken is Narrowgauge with Sections of Cogwheel assistance, Interlaken-Zweisimmen is Standardgauge and Zweisimmen-Montreux is Narrowgauge again. They only have to put another Locomotive on in Front between Zweisimmen and Montreux, because it runs on 900V DC, whilst Luzern-Interlaken-Zweisimmen runs the usual, in europe widely used Standardcurrent of 15'000V AC at 15.6Hz
Another speciality can be seen in Graubünden, eastern Switzerland, where there are Sections of Track running a 3-Rail-Setup, so Narrow- and Standardgauge Trains can use the same Track.
It's also pretty common in Europe to have Locos capable of changing to multiple different currentsystems on the fly.
It makes me often wonder why nobody else uses these Technologies, since they are available and running smoothly...
This is an amazing video! Australia is very interesting when it comes to railroading
only for freight, the suburban lines suck lmfao
Great video.
The different gauges in Australia was best described by American writer Mark Twain when travelling between Sydney and Melbourne. Having to change trains at Albury on the New South Wales/Victorian border.
"Now comes a singular thing, the oddest thing, the strangest thing, the most unaccountable marvel that Australia can show," he wrote. "At the frontier between NSW and Victoria our multitude of passengers were routed out of their snug beds by lantern light in the morning in the biting cold to change cars. Think of the paralysis of intellect that gave that idea birth, imagine the boulder it emerged from, on some petrified legislator's shoulders."
Just another Australian here to say what a great job you did with this video.
I am not a 'train guy', but do have an interest in rail & I certainly learnt a lot from this. Excellent.
Great overview of our rail network, you did better than some locals 👍
If you want some coffee and waffles on an active fright line. Head to Spring Bluff in Toowoomba. It's a picturesque spot known for its beautifully landscaped gardens and historic railway station.
I'm not even a big railfan and found this video very interesting and cool. Nice work!
Dear to my heart - my GGG Grandfather came to Australia in the 1850s as a Sapper (Engineer) in the Military, and surveyed what is now known as the Zigzag railway (so named because it would change direction to work it's way up a mountain range) through the Blue Mountains west of Sydney. He went on to Survey much of New South Wales' rail network. His son was Chief Clerk (i.e.. CFO) of the NSW Railways. Early in my career I was involved in some of the earliest work on autonomous vehicles (Mine Haul Trucks, not Trains) with Rio Tinto.
Given the success of this video, if you did a series about railways in different countries around the world it would probably do quite well
Great video! Thanks! I live in geelong an hour from Melbourne.
Every 2 years in March the Steamrail has their workshops open, it's an amazing day of up close to steam! Well worth checking out if you're around.
Liked and subbed Skippy, cheers
Great video as an Aussie now living in California America I worked for the Victorian government railways at there Newport Railway Workshops originally as a boilermaker repairing rolling stock and constructing new rolling stock I moved from that job to become the Boilermaker Supervisor in the locomotive shop where they did minor to major repairs to full overhauls my crew did repairs or modifications to the locomotives, we took on the major smash repairs from collisions with other locomotives or with trucks or cars. So I learnt a lot about them and I had to write up estimates for my boiler makers repairs each trades supervisor would have to write an estimate for there jobs on the locos
How's commie California?
I hope you do make it to the land down under, if you do I highly recommend you visit the rail museum in Ipswich QLD, there is a lot of interesting stuff there, plan at least 2-3 days, so you can take your time and really soak in all the exhibits. You won't see all of it in 1 day even if you rush and what rail enthusiast wants to rush past glancing at an exhibit and not read the detailed information boards? (I'm not even a rail enthusiast and it took me 3 visits to see everything I wanted to see)
GM was a bit skeptical about the double ended EMDs and the VR CME visited Detriot to discuss the requirements.
Woolshed Flat is NOT in Victoria but in the mid north of SA. On the now Pichi Richie line which was part of the mainline to Darwin.
Peterborough was literally the centre of Australian rail with all 3 guages serviced there. Huge turntable with all guages.
I too was of the understanding that the convict railway went to Eaglehawk Neck.I can remember from the early 60s the route of the line. Though maybe not, maybe a horse and cart track.I have been there a dozen times since and nothing now.
"convict-powered tram way" might just be the most australian thing ever.
Lol
Cool video.
I note that Peterborough was mentioned due to having all 3 gauges, but up until the early '70s the break of gauge from broad gauge to narrow gauge was located at Terowie, which is about 15 miles south of Peterborough. IMHO the most interesting thing about Terowie is that it was where General MacArthur gave his famous "I shall return" speech during WWII.
And there are a few spots with all three gauges going on at the same time. Makes the point work interesting
Absolutely spot on. Australian steam locomotive design was very much a fusion on American and British designs.
Thanks for the interest in our railways, and great video! And it's always fun to hear people who haven't grown up with them trying to pronounce Australian place names. I'm sure you have a similar experience with American place names.
Haven't watched yet, but I've seen they also have giant road trains. huge trucks with like 15 trailers behind them.
You have been misled - our roadtrains are nowhere neaqr 15 trailers anywhere. There was (IIRC) one bthat was set up in the middle of nowhere just to set the Guiness Book of World Records. Average outback road trains are just 4 trailers but there are some longer fule trains riunning between Darwin and AQlice SAprings that havfe up to 8 trailers but usually less.
@@davidphilips4637 are you ok ?
the max is 4-5 trailers not 15 just so you know
@@nelsondawson9706 i’ve seen 8 behind a kenworth before on the great northern hwy
@@davidphilips4637 Hehe. Thanks, I was exaggerating. Those trucks are huge.
Please look up the Australian Zig Zag Railway near Lithgow in NSW which is now again in operation as a tourist railway.
Yes! Lo, The Clouds Parted And A Shaft Of Light Beamed Down, And Thus A New Southern Plains Railfans Video Was Born! ♡ #SouthernPlainsRailfanForever
🤣🤣🤣
I've had a serious interest in transport since joining the London Underground in 1976. I think this is an excellent introduction and summary of Australian railways. Good work.
Great vid...I'm in Tasmania , live in an ex rail cottage in a town that used to be the terminus of a very important branch line but was closed by dumb people in 1982..My dad was the last ganger (section track boss) out of St.Marys ...My house was built in 1886 and the fence to this day is posted by railway track.. The former rail station is now a museum with lots of rail memorabilia included... Your otherwise amazing vid has many places names spoken incorrectly but that's okay and very understandable of course ..Don't worry about that .. As you said this only is a taste of rail in this country but a great taste,,, One day also check our unique and very different road trains seen nowhere else in the world .. These road going behemoths often more than 160 ft long taking huge loads to places you won't believe . Aussie road trains are something else... Cheers to you
As someone who does consulting work for BHP WAIO Rail I enjoyed this. I even recognised one of the maintenance facilities at Nelson Point (Port Hedland). Nice one!
These Australians are too smart
Of course we are
Yep of course (as an Australian) we are nuts with railroad technology
I'd say they're mentally aroused
Nah you’re just american
Ofc
We run driverless trains from western Sydney into the city and are expanding the network. The Metro is quick, efficient and has never had an accident to date.
Great video..... One of the BHP train was a run away and had to be derailed
You should look into Queensland's narrow gauge heavy haul coal lines and its impressive trains.
Queensland also has the worlds fastest narrow gauge train.
Tasmania has the ABT on the westcoast. Those are very unique and the only ones operating steam ABT system daily.
A follow up video is highly recommended. 👌
Queensland Rail is also the first in the modern world to adopt a 1067mm mainline from Brisbane to the far north. Most of them are at minimum, standard or broad gauge everywhere else
I really appreciated the incredible depth and width of knowledge in this video. As there always are small points to mention, The capital city of Victoria (Melbourne) is locally pronounced 'Melbn' with no long syllables.
please do a video on
the porters steam loco
the Japanese class d5,
the Chinese QJ 2,10,2
or just exsamples of asian trains
how do gear trains work
something on saddle bolier and side tanks (like the big water boxes) tank engines
double ended diesel trains
what to do if the train stalls
one talking about the different types of steam funnles and there uses,
a video on steam locomotive combination breaks (steam and vacuum brakes)
a short video on how a Armstrong turn table works
what did train flagman do
what did trains (mostly steam) do when going in tunnels, ive heard of gas masks or just useing a wet cloth, or did they bring in other engines like later on they used electric trains, or were there no bigv tunnels.
evaluation of electric trains
why are some trains wagion tops (the stream lining thing to boilers)
railway terms abd slang
one on the meaning of flag and lantern colors like green on rear engine means theres another one coming soon,
the different types of cut offs/reversers/Johnson bar
some are a big lever, some are a big valve wheel, and ive also seen some that are like rods, one exsample is train sim world 3 and im not sure where to find the other reverser
and how much water do steam trains take usually, and how much would the crew drink
Very well researched and the covering of the main topics. Sydney NSW also has had driverless "Metro" passenger trains running for some time now with the network expanding. The Pilbara ore trains were also "Driver Only" for a number of years before technology made the driver redundant. Like in North America we have double stacked container trains running across from Goobang Junction NSW to Perth WA, there are many on my You Tube site. Just love the American pronunciation of some Australian names, left me laughing. Great work and thank you.😉
Australia.....
The land of Killer giand birds, demon spiders and Steve Irwin
The latter of whom is sadly, no longer with us after his encounter with a stingray.
And Drop Bears, which are tenfold more dangerous than killer giand birds and demon spiders.
Might be worth checking out the inland rail project! Its a rail project linking a fgreight line between melbourne and QLD, it will be capable of having double decker transport trains the entire way!
Wow! Great documentary, loved this. Thanks for showing us.
As a brit this was a very interesting video thank you :)
Just want to address your point about driveless trains. They do exsist elsewhere in the world, mostly on metro systems (I'm going to use london as and example as I know it best). The Victoria line which was built in the 60's has had driverless trains from the start (with an operator for the doors) which allows 36 trains per hour to operate in each direction. As for heavy rail, the crossrail project which links commuter lines from the east to the west has a "core" section under London where class 345 units are operated by a computer to enable 24 trains per hour in each direction. The same concept is applied north to south with Thameslink.
The main reason for automation is simple. Speed. A human is not precise enough to know the exact millisecond to slam on the breaks to stop perfectly in the platform. Diverless trains are surprisingly safe.
You might want to explore two Queensland lines called the "Gulflander" a totally isolated line running from Normanton to Croydon in far northern Queensland as well as the "Savannahlander" which runs from Cairns to Forsayth, again in far northern Queensland. You won't believe the track they run on. Around every blind corner is a bull or a kangaroo lying on the tracks, sunning itself. Another line worth exploring is the "Old Ghan" the predecessor to the current Ghan. It' ran from Adelaide to Alice Springs on tracks almost as bad as the two Queensland ones.
You might want to have a look at the Normanton to Croyden line. AKA " The Red Rattler" Its totally isolated from the rest of Queenslands network and the "engine" has a gear shift.
Those fish bellied rails you showed near the beginning are from the Cromford and High Peak Railway in the UK which operated from 1825 to 1967, and a small section is still open today. You can walk or ride the majority of it. Those actual rails are at the top of Hopton Incline which was the steepest adhesion worked standard gauge railway line in the UK at 1in14 or 7.12%. Just up the road from where I live! Well worth googling as it was a mighty interesting railway!
We also have driverless passenger trains in Sydney. The Metro System
Speaking of iron ore, you should do a video on the history of the DM&IR in Minnesota and the big Baldwin Yellowstone engines! They’re very interesting and actually more powerful than the Alco Big Boy engines (depending on your definition/parameters).
You can tell when one of Rio’s autonomous trains is coming to a road crossing because of the two blue lights on the cab, and it automatically gives a five second blast on the horns instead of whatever the driver felt like before. It felt weird seeing no driver and the sun blinds down, but we’re used to it now. Rio are GE stalwarts with North American manufactured locos, but BHP are exclusively EMD SD70ACe after the disastrous run with their GE AC6000s. BHP and FMG use one driver, they have had one person crews for decades. Incidentally, the newish ECP braking system was the cause of BHP’s 42,500 tonne runaway train in 2022 when train control in Pt Hedland had to forcibly derail it.
@gm16v149 BHP is all EMD now simply for standardization with locos and parts from one builder. It has nothing to do with a disastrous wreck with the AC6000s. In early 2011 BHP already announced plans to retire certain units, meanwhile replacements were already being shipped and constructed. All of that in phases.
yes i do have something i think you may have missed. Fortescue metal's infinity train. its a modern take on a gravity train using regenerative breaking to charge on the downhill with no extra charge needed to get back up to the mine when empty.
That’s really cool! I didn’t know about that.
@@Southern_Plains_Railfan theres a 13minute video from the creator engineering with rosie called 'this mining train powers itself: the infinity train' if you want to cut copy paste and have a watch. for some reason youtube wont let me link it. all the best mate
What a great video. Lots of good, accurate information. Thank you for all of the work that you put into this. Thumbs up.
I worked at Sigra rolling stock components in Penrith, Sydney for 11 years as the maintnance/fabrication man. I was pleased to see one of our brake hoses @10:59. I built the automated machine that cuts the hoses to length before crimping. Very well put together video, thanks.
I enjoyed the video. I was born and raised in Port Hedland up in the harsh Pilbara region. My dad used to run the ore car workshop back when it was Mt Newman mining while today it's BHP. Back in the old days it was easy to get into the main site where all the work is done to the trains and ore cars plus all the stackers and such. Loved seeing it each day when we got to go into the site to pick dad up from work. Walking into the massive workshops where dad worked and seeing the massive trains up close. Can't do that these days.
18:23 is my old home town of Lithgow, NSW, well known for Zig Zag Railway
Also running big iron ore trains is Roy Hill Mine in the Pilbara WA, I am about to head over there for a mine shutdown again.
great video, you could do one on the cain trains in queensland
The Standard and Board gauge streamliners have always appealed to me. Naturally you have models which are basically elongated EMD and ALCo F-units, but I like how each standard and broad gauge system had their own specialty. Victoria has the double-ended B class, many of which were rebuilt as A class, which I believe are the only dual-cab Bulldogs that don't sacrafice the outline for loading gauge. New South Wales, in between the Bulldogs (42 class) and Flat (44) noses, you have the 43 class, probably the last produced remnant of the ALCo-GE partnership, as they resemble GE's UM20 cab units more than FA's. Then with South Australia, you have the 900 class. Resembling the ALCo PA's mostly, their innards are actually that of the first British mainline diesels. Oh and the Commonwealth Railways have the "CL" class, which are basically streamlined SD40-2's
The "Infinity Train" is worth having a look into. I believe it was developed by Fortescue.
Driver-less metro trains exist around the world. Copenhagen has a driver-less line running from Orestad. And likewise with London DLR.
I went to school in Brisbane in the 1980s, and we were taught that the reason why Queensland uses narrow gauge is because the treasury was robbed before construction started, so to make everything cheaper, narrow gauge was adopted. Dual Gauge was implemented during WW2 to help the war effort. But Standard Gauge only goes as far north as Roma Street in Brisbane, as far as I'm aware. Thanks for any corrections for stuff I've got wrong.
Makes good sense 💰
Hey brother, our sydney habour bridge had 4 lines going across it and i think in its first stage of design it was only going to be for trains and walk way, at some of the stations you can go down the lift and closely watch as you bypass a level and we have another station that has only platforms 3,4 ,5 ,6 the others where closed off and recently opened to public as a display.
I am in my 40's now but growing up i remember we used to change trains between Melbourne and Sydney then at one stage it was change loco's then it was just direct.
The Harbour Bridge was always built to take cars, but also trains on one side and trams on the other, which it did have for some time. I'm not sure about the station with platforms 3 to 6, but perhaps that's Wynyard where the trams using the bridge terminated.
this could be right as well, the tram used the bricked tunnels at one end of the harbour bridge i will see if i can find a photo of the tunnels I am talking about but yeah it would be interesting to find where those tunnels go and what stations they went to ect.@@PJRayment
@@blackIce504
An image search for _Sydney tram map_ found a track map of the CBD showing the bridge tram lines serving only Wynyard station.
16:53 that made me burst out laughing. Convict powered rail, love it. Great video.
Excellent presentation. May I suggest a look at Steamtown in Peterborough, Pichi Richi Railway in Qourn, St.Kilda Tramways in St.Kilda and Steamranger at Victor Harbour. All in South Australia. For some history, look at Terowie in South Australia northern areas, one of the few remaining areas where all three gauges still exist and Port Pirie that still has Australia's longest rail platform. Adelaide is also home to the famous Ghan and midway point for the Indian Pacific. 👍👍🇭🇲
I went to Sydney back in 2005 and found that they have a subway that is heavy rail like a commuter train that goes through the city and is also a main line train travel also through the city and country side. i said that it's crazy. Like Having the The New York subway and NS/ CSX going through mid-town Manhattan. Great video Cheers mate!😃
As a Victorian and having worked with the Metro railway system it is sad to see that the state government opted for CCP developed and built trains for our suburban railway system.
Thank you for editing this video, as it's more work than people realize. Very well researched, with many relevant clips inserted to make it interesting.
From an Australian from Kalgoorlie/Perth, thank you! Warmed my heart learning all this from a yank 😉
Thank you I really enjoyed this, I live in the outback of Western Australia. Would love to see more as there is so much going on over here in transport. *you are one of the few that did his home work before posting.