Replace Kia Sorento Alternator in less than 12mins. (2011-2015) 2.4l

แชร์
ฝัง
  • เผยแพร่เมื่อ 2 ต.ค. 2024
  • It definitely didnt take less than 12 mins in real life, but It will in this video.

ความคิดเห็น • 53

  • @luckylep1973
    @luckylep1973 ปีที่แล้ว +8

    Thanks for the video, this was extremely helpfull. I did the whole job today start to finish in about 2 1/2 hours. You saved me a ton of guess work. It worked out smoothly & I didn't even F bomb once which is really good for me 😂

    • @carlosmanuel3468
      @carlosmanuel3468 7 หลายเดือนก่อน

      Hi! Did you have to do anything to the AC after? Like, did you lose freon?

    • @joriel360
      @joriel360 7 หลายเดือนก่อน

      @@carlosmanuel3468no you wouldn’t

  • @lylepopson7527
    @lylepopson7527 11 วันที่ผ่านมา

    Thanks for the video
    I removed the power steering reservoir to make plenty of room.
    Got the bolts out just fine.
    Alternator will not budge.
    Afraid to beat on it much harder?
    Am I missing something?

    • @AUDIO2AUTO
      @AUDIO2AUTO  11 วันที่ผ่านมา

      @@lylepopson7527 oh you're talking bout it being stuck where it mounts. I had to hit with a hammer and pickle folk to get it to move. You can spray some penetrating fluid in the bolt holes as well.

    • @lylepopson7527
      @lylepopson7527 9 วันที่ผ่านมา +1

      Thanks
      That's what I ended up doing
      PB blaster and a block of wood and a big hammer 😮
      And as much as I hated I had to hammer the new one in place🙄

  • @zebedayoJ
    @zebedayoJ ปีที่แล้ว +1

    Beautiful 😍 work, thanks! Worked smart

  • @joshuacotton8114
    @joshuacotton8114 3 หลายเดือนก่อน

    12 mins!!!! More like half a day.

  • @RobertMichael-z5y
    @RobertMichael-z5y ปีที่แล้ว +2

    Be truthful about how Ling it takes not how long the video is. It's a lot easier on my 15 sorento from the bottom but that's still at best 1hr 10 mins. Can we try this again

    • @AUDIO2AUTO
      @AUDIO2AUTO  ปีที่แล้ว +5

      If you thought it actually took 12 minutes in real time you probably should leave the job for someone else.

    • @ryanejhinger5331
      @ryanejhinger5331 ปีที่แล้ว

      I think the bottom looks easier as well

    • @ryanejhinger5331
      @ryanejhinger5331 ปีที่แล้ว +1

      ​@AUDIO2AUTO in his defense..that's how it is written ..

  • @PastorJimmyParker
    @PastorJimmyParker 3 หลายเดือนก่อน +1

    Man, I've done everything you've said to do but the alternator just won't fit out. The AC lines are in the way. How did you get it out?

    • @AUDIO2AUTO
      @AUDIO2AUTO  3 หลายเดือนก่อน +1

      Move the power steering reservoir out the way, and you have to position the alternator just right to slide it out.

    • @AUDIO2AUTO
      @AUDIO2AUTO  3 หลายเดือนก่อน +1

      9:11 Position the alternator the exact way you see in the video when its on its side and slide it in the same way i drop the alternator down.

    • @PastorJimmyParker
      @PastorJimmyParker 3 หลายเดือนก่อน

      @@AUDIO2AUTO I'll give it a shot!

    • @PastorJimmyParker
      @PastorJimmyParker 3 หลายเดือนก่อน

      @@AUDIO2AUTO it worked!!! Thanks, bro!!

  • @glennleuz7632
    @glennleuz7632 3 หลายเดือนก่อน +1

    Great video. Thank you. Damn you certainly held it together for a pain in the a$$ job. I probably would have let out a few f bombs🤣🤣

    • @AUDIO2AUTO
      @AUDIO2AUTO  9 วันที่ผ่านมา

      I definitely did, just off camera lol

  • @jessiegibson9023
    @jessiegibson9023 2 หลายเดือนก่อน +1

    Good video thanks

  • @lilrelltha1495
    @lilrelltha1495 ปีที่แล้ว +1

    What kinda tool was you using to unscrew your bolts?

    • @AUDIO2AUTO
      @AUDIO2AUTO  ปีที่แล้ว

      Kobalt electric ratcheting wrench

  • @tristyndavis4387
    @tristyndavis4387 9 วันที่ผ่านมา

    Any tips on getting the power steering pump back in ?

    • @AUDIO2AUTO
      @AUDIO2AUTO  9 วันที่ผ่านมา

      ​​@@tristyndavis4387 Wire brush or sand down the area where it sits then spray some wd 40 or equivalent in there.

  • @wolfcezair1181
    @wolfcezair1181 ปีที่แล้ว +1

    Man just drop down AC compressor it took you 12 minutes just to take the belt off😅

    • @miraclesmusic
      @miraclesmusic ปีที่แล้ว

      thats my method for 2016 Kia Sorento as well but it extremely difficult to get the mounting bolt on top behind the AC tubes

  • @Blackmumbo321
    @Blackmumbo321 6 หลายเดือนก่อน +1

    Hey bud does the tire absolutely have to be removed

    • @AUDIO2AUTO
      @AUDIO2AUTO  6 หลายเดือนก่อน

      No but it will make the job quicker/easier in the long run.

  • @fkmubc1961
    @fkmubc1961 ปีที่แล้ว +1

    Спасибо тебе добрый человек!!!

  • @bostonchoir
    @bostonchoir 10 หลายเดือนก่อน

    Your old alternator looks soaked with oil. Is that because of the engine oil leakage due to a bad "Low oil pressure sensor?" Kia had recall on the item (sensor).

    • @AUDIO2AUTO
      @AUDIO2AUTO  10 หลายเดือนก่อน +1

      Its power steering fluid from when it was moved out of the way.

  • @fatherx6807
    @fatherx6807 9 หลายเดือนก่อน

    Question the PS pump how big of a pain to get back in the bracket? And what did you do just wiggle it?

    • @AUDIO2AUTO
      @AUDIO2AUTO  9 หลายเดือนก่อน +1

      Not too bad. I would maybe hit it with a wire brush or sand paper to give it some more clearance to make it easy to get back in its spot.

  • @charlesstewart7896
    @charlesstewart7896 4 หลายเดือนก่อน

    How similar to 2016?

  • @By_Any_Means_Necessary
    @By_Any_Means_Necessary 3 หลายเดือนก่อน

    Thanks for the info 👍🏾

  • @branman3211
    @branman3211 8 หลายเดือนก่อน

    THIS IS ALSO GOOD FOR HYUNDAI SANTA FES. THANKS!

  • @gleorunyon3rd744
    @gleorunyon3rd744 ปีที่แล้ว

    12 minutes lol 😂

  • @Artur841984
    @Artur841984 ปีที่แล้ว

    Kia Sorento 2? Kia Sorento 3?

  • @derickwells5980
    @derickwells5980 2 ปีที่แล้ว +2

    How do u raise the engine up to get that top screw out....do u need another jack🤦

    • @AUDIO2AUTO
      @AUDIO2AUTO  2 ปีที่แล้ว

      Yes, just use another jack with some wood or rubber in between the top of the jack and bottom of pan. Dont have to lift it far.

    • @cornell833
      @cornell833 ปีที่แล้ว +1

      I used a 14mill flex ratchet

  • @majorflankzz133
    @majorflankzz133 ปีที่แล้ว

    Good video brutha thanks helped me a lot

  • @daleparkes8650
    @daleparkes8650 ปีที่แล้ว

    Very helpful!! Thanks

  • @jerrylalonde1199
    @jerrylalonde1199 ปีที่แล้ว

    Helping a friend change alternator got this done .Haveing trouble putting be power stering pump

    • @AUDIO2AUTO
      @AUDIO2AUTO  ปีที่แล้ว +1

      Yea that was the hardest part for me, getting the pump back in its spot.. Took me about a good 20mins

    • @jerrylalonde1199
      @jerrylalonde1199 ปีที่แล้ว

      Thank you for your vid He had the long bold missing .I went found a bolt .All went well . Thank you

  • @brandonmcbride4350
    @brandonmcbride4350 ปีที่แล้ว

    Click bait 😂. 12 mins. Good job though

  • @skeletor7908
    @skeletor7908 ปีที่แล้ว

    That's so dumb you have to raise the engine to get one bolt out. How hard would it have been to just put an access hole for it to go thru! 🤦🏻‍♂️

    • @AUDIO2AUTO
      @AUDIO2AUTO  ปีที่แล้ว

      Exactly or they could have made the bolt shorter also.

    • @timcomer6057
      @timcomer6057 5 หลายเดือนก่อน

      That’s the power of an engineer at work