Nice! Quality workmanship. Not full floating, but good use of cantilever as floating does. Bit of space lost with the 4x4 to get the notch factor. It's always a trade off!
Perfektná a pevná polica 👍 do dielne a komory super nápad 👏 myslím že veľa tvorivých ľudí nadchne váš tvorivý nápad 😉 ďakujem za inšpiráciu a posielam pozdrav zo Slovenska 🇸🇰
I guess he wanted to show a way to do it without using tools a lot of people don't have. And you'd need to do multiple passes with a router taking off small amounts at a time.
I saved this one for a future build, NICE, very nice, but the screws/bolts holding it into the wall seem to be a little light. For the load you show they are fine, but if you load the shelves up as most of us will, they might not be enough. Showing a few alternatives might be a good idea for you to explore .....
Might be more for who is going to build a floating system like this. They could take the time to do load tests to find out when the screws pull out of the wall. If someone knows how many in^2 and the lb/in^2, then they could test for 150% of the max load. If a lot of weight is going to be placed on the shelves, then will the shelves themselves need support bracing like a 1/2 x 2 x length so the shelves won't buckle in the middle? Both crosswise and front to back. If I ever have a shop where I'll want wall mounted storage space, I'll take the time to find out what I need to do. Over time wood sags. Why I mentioned support for underneath the shelf.
@@free-energy-systems Yes, it's certainly a valid point. I think when I build mine I'll actually extend the posts to the floor to act as a "foot" and carry a lot of weight as well.
![building a wall and a shelf on the wall with plywood & 2x4 [woodworking]](http://i.ytimg.com/vi/nBC9Ix1cCPw/mqdefault.jpg)
![building a wall and a shelf on the wall with plywood & 2x4 [woodworking]](/img/tr.png)
햐~~~
짱짱
선반을 저런식으로 ...
견고함이 돋보이는... 구~~ㅅ ~~~
작업실이 점점 정리되어가는 ..
알찬 채움으로 ...
장마두 끝나구 폭염이 전해지는 ... 무더위도 잘이겨 내시길
Ingenious idea, excellent execution and beautiful results. Thank you for sharing.
Excellent Video. Good Work & Idea.
4:20 those screws seems to be waaay to short. Hope that won't become an issue in the future :)
와 팀장님 깔끔하니 야무지내요 멋진 솜씨 잘보고 갑니다 대단하내요^^
Really awesome. I'm a beginner so I need to make some without all these tools
Best design. The small triangles increase the usability of the shelves by a big margin! Love your work
Thank you from vietnam!
벽에 재질이 콘크리트라 어려움없이 할수있는 작업같네요. 조립식 판넬이나 석고보드위에는 까다로운 작업을 해야하거든요. 작업실 벽이 대체로 콘크리트인게 마음에 드네요.
Nice work I think this plywood will bend and twist
super travail encore et toujours aussi propre et soigner
Excellent I'll certainly make it for my garage thank you
디자인이 살아있는 깔끔하고 세련된 작업
오늘도 행복하게 영상 잘 보고갑니다
건강관리 잘 하시구여
항상 감사드립니다 👍🥰🍁
감사합니다 ^^
New to woodworking. Love your stuff.
Very nice! Great work, and thanks for sharing.
Nice🙏 Thanks for sharing this super cool video🙏🙏🇩🇰
Good ideas. I like it.
Nice! Quality workmanship. Not full floating, but good use of cantilever as floating does. Bit of space lost with the 4x4 to get the notch factor. It's always a trade off!
Excelent, I was looking for this kind of stuff
깔끔한 선반입니다~~
역시 믿고봅니다 김팀장님!!👍🏻👍🏻👍🏻👍🏻👍🏻
Nice build. Looks like your next build should be a step stool instead of using a chair. Look forward to the next build video!
I learned so much today, thanks
Thank you for sharing
Love will win, fear will not - Love fear 💖 than Love will always win 🙏
저도 저런공간 있다면 좋겠네요.
부럽습니다. 좋은영상 항상 감사합니다.
김팀장님 영상
외국 목공 사이트 우연이 보다가 김팀장님 영상보고 되게 반갑습니다. 역시 외국에서도 통하는 군아 ~~~하고요
이번 영상은 꼭 만들어 보고싶네요.
애들방에 책꽂이 만들어 주고 싶었는데~~
좋은 아이디어 감사합니다 ^^
코난님 안녕하세요~ 퀀텀에서 보셨어요? 한번 허락했더니 이제 말도 없이 퍼가나보네요 ㅋㅋㅋ
오늘도 댓글 고맙습니다 ^^
Great design mate. Love the simple visual learning in your videos so good.
It looks like you have your own lumber yard with all of that lumber!!
hi Dekay nice job very useful
OMG you are SO CLEVER!!! Very inspiring indeed, especially for a beginner, thank you!
Really nice shelf!
Easy and Quick, but i like it more stable.
That was excellent .
Thank u
You make it look so easy
수납장 만들고 싶었는데
큰 도움이 되었네요..
종종 들러서 구경할께요.
구독과 좋아요는 필수..♡
도움이 되었다니 제가 더 좋네요 감사합니다.
Just curious
When making the grooves, why did you not use a router?
You wouldn't have to chisel out the leftover.
멋있써요..쭉..화이팅!
Perfektná a pevná polica 👍 do dielne a komory super nápad 👏 myslím že veľa tvorivých ľudí nadchne váš tvorivý nápad 😉 ďakujem za inšpiráciu a posielam pozdrav zo Slovenska 🇸🇰
Интересное решение! Хорошая работа. 👍🤪🇷🇺
Nicely done.
본드를 두가지섞어쓰시는데
어떤건가요??
앗! 1번댓글을 놓쳤군! 넓은 선반이 작업이 많아질수록 알차게 채워지겠지요? 더운여름 항상 건강 챙기시길!
Продолжаем улучшать рабочее пространство. Теперь есть куда положить разные вещи по мастерской.
ㅋㅋㅋㅋㅋㅋㅌ
Со временем это так и происходит.
Man you make simple and elegant stuff. Awesome. Thank you.
勉強になった～👍😁
Great idea
really nice made. Great video!
Muito bom Parabéns nota 10
Another great project, thanks!
Super cool !!!
Dekay I really love your Idea man !!!!!! i just subscribed and i could watch your videos all day
Thank you 😊😊😊
Et voilà des jolis rangements très efficaces bravo à bientôt salut Jeannot 🛠😉
Genial amigo....saludos desde Chile....
Great video man. Good for you!
Lindas,gostei muito da idéia de suportes das prateleiras, parabéns!
Beautiful woods..
awesome build! 6:51 is it just me or is that lower support loose when your bouncing on it?
Is this the stanley FME721-QS? I see you swapped for the newer Bosch model, but for home use the stanley is good?
Stanley is enough. Bosch is too expensive =)
How do you calculate the strength and how much material you need for the brackets? Do you run a simulation in cad/fusion 360?
I just calculated it by feeling =)
Soundtrack is 👌🏻, thanks again 🙏🏻
What's the track title bruh, sounds prety funky.
굿아이디어입니다!
감사합니다 ^^
Excelente proyecto!!! Muy útil.. gracias por compartirlo.. Saludos 🙋🇦🇷... Cuidate
Muito , Muito bom o seu projeto parabéns.
Obrigado por ensinar.
good day sir can i see the full picture of this circular saw guide at 5:24? thank you sir
Amei tô abrindo uma loja e gostaria de fazer esse modelo de prateleira, mais preciso da metragem das madeiras,desde já obrigada
쉽....쉽...쉽게......쌤 손이 있어야 쉽게....
갑분호러 ㄷㄷㄷㄷㄷ
Очень хорошо!
당신과 당신의 장비는 매우 전문적입니다
Genial buenisima idea
Super show parabéns 👏👏👏
Такие опоры полок впервые вижу. Удивила жёсткость, ну или вес мастера птичий. Недостаток - просвет между стеной.
можно сварить из 2-х металлических пластин г образную опору и усилить.
Excelent idea and best job. I´ll copy you ¡¡¡¡
항상 아이디어가 참 좋으신거 같아요~👍🏻 이번 영상도 잘봤습니다~
사장님 오셨어요~ 오늘도 고맙습니다~
Tenes my respeto amigo 👍👍👏👏 excelente tu trabajo, saludos desde Curitiba PR 🇧🇷👍🤜🤛👍
Se mira genial me gustaria hacer uno parecido
bravo c'est super!!!!!!!!
Super
1:54 Wouldn't be easier to make that cut using a manual router?? ... Nice work though 👏
I guess he wanted to show a way to do it without using tools a lot of people don't have. And you'd need to do multiple passes with a router taking off small amounts at a time.
작업공간 생기면 꼭 따라서 만들어 보고 싶네요^^ 너무 잘 봤습니다.
감사합니다 ^^
How about the door blocking?
Mantapp👍👍👍
عاشت ايدك على عمل 👍👍👍👍
너무예쁘네요~
기둥,선반 목재종류,사이즈알수잇을까요?
4*4 구조목, 15t 합판 사용했어요 ~
영상올라온지 5일이나 됐는데 장염걸려 지금까지 못보고있었다니... 여름음식 조심하세요
que madeira leve é essa ?
Bravissimo
I saved this one for a future build, NICE, very nice, but the screws/bolts holding it into the wall seem to be a little light. For the load you show they are fine, but if you load the shelves up as most of us will, they might not be enough. Showing a few alternatives might be a good idea for you to explore .....
Might be more for who is going to build a floating system like this. They could take the time to do load tests to find out when the screws pull out of the wall. If someone knows how many in^2 and the lb/in^2, then they could test for 150% of the max load. If a lot of weight is going to be placed on the shelves, then will the shelves themselves need support bracing like a 1/2 x 2 x length so the shelves won't buckle in the middle? Both crosswise and front to back. If I ever have a shop where I'll want wall mounted storage space, I'll take the time to find out what I need to do. Over time wood sags. Why I mentioned support for underneath the shelf.
@@free-energy-systems Yes, it's certainly a valid point. I think when I build mine I'll actually extend the posts to the floor to act as a "foot" and carry a lot of weight as well.
un carpintero si una escalera 🤦♂️, muy buenos trabajos 😍
Great music pick !! Thank you my brother!
whats the track title pls guys?
Impresionante quedó muy bien, que habilad que tienes amigo , 👏👏👏👍👍👍🇦🇷🇦🇷🇦🇷🇦🇷🇦🇷
굿굿
SHOW, MUITO PRATICA E RAPIDO DE FAZER
Amazing bud
Nice👌
Hi 👋 friend I'm your fan from Morocco can you tell me about circular saw, between Milwaukee and dewalt y're been used Wich one efficient thanks
🤠 Excelentísimo!!
원래 각도절단기로 자를때 왔다갔다 하면서 자르는건가요? 아니면 각자 스타일인건가요?
마찰을 줄이려고 조금씩 왔다갔다 합니다. 그냥 하는분들도 있긴 해요
What is the name of this soundtrack
1:00 이렇게 잘 하시는 분이면 트리머?가 있을텐데 홈 파실때 톱으로 여러번 왔다갔다 하고 끌로 파시는 이유가 따로 있으신지 궁금합니다.
DIY 해보려고 온갖 영상들 다 찾아보는 중인데 어렵네요 ㅠ
트리머는 매끈하고 정교한 작업을 할때 주로 쓰고있어요~ 안보이는 곳은 대층 끌로 몇번 긁어주고 말아요
@@dekayscrafts 으으음...트리머라는 장비로 홈도 팔수있긴 한거죠???
@@이상윤-x3z 네 팔수 있습니다. 제 최근 영상 중 밀워키 트리머 영상의 마지막 2분정도 보시면 홈파는 장면 나와요~
@@dekayscrafts 보고 왔습니다 ㅎㅎㅎ 답변 감사합니다!
Gostaria de saber qual a espessura e metragem da madeira que fica na parede
I love watching him work!! Keep it up 🙏
혹시 구조재 사이즈랑 이름 선반 두께랑 재질좀 알수있을까요?
I like your circular guide mate, can you make a video tutorial for that but in jigsaw 😀
thanks =)