Using the BufferPro function in ӒKTA avant 25 for automated preparation of buffer plates
ฝัง
- เผยแพร่เมื่อ 31 ก.ค. 2024
- Preparing buffers manually for buffer conditions screening might be very time consuming. Using ÄKTA avant system will significantly reduce manual work and add control with in-line pH and conductivity recording during buffer preparation. This videos shows how to use the BufferPro function in ÄKTA avant for automated preparation of buffer plates.
0:00 Introduction
0:42 Import the downloaded methods in Method Editor
1:11 In UNICORN software, set fraction collection parameters in System Control
1:26 Open the method for second buffer system in Method Editor
1:47 Set pH and % B buffer (salt)
2:03 Enter settings for relevant plates or tubes
2:13 Prepare flow path and buffers for second buffer system
2:24 Prepare fraction collector
2:35 Create Method Queue to enable filling of multiple plates for the second buffer system
3:27 Cover filled wells
3:38 Second buffer system finished
3:43 Open the method for first buffer system in Method Editor
3:51 Select buffer system
4:27 Prepare flow path and buffers for first buffer system
4:31 Create Method Queue for the first buffer system
5:01 Start the Method Queue in System Control
5:21 You can now start your screening experiment
5:32 Edit fraction settings in System Control
5:47 Edit buffer recipe in Method Editor
6:31 Edit Fractube type and Frac volume
6:43 Edit scouting settings - วิทยาศาสตร์และเทคโนโลยี