my laser is dead on in the center of the project, but as i get near the corners, the red laser is offset again. If i adjust it at the corner, it messes with the other corners which are also off. I am using the 300x300 lens on a 30w Mopa. My 50 watt regular markers (that look exactly the same but without the MOPA capability) all seem to hit the spot where the laser is pointing no problem. Even with the larger lens. Any tips?
Here's an issue. following your method. technically should work. which I did. then move the art work an inch to the right or left in the software, red light it, move your test piece so the artwork red light is on the material. then burn the square. now my red light and square of way off. what causes this? I have done the lens correction. it seem the further away from the center, the further off the red light and artwork becomes off.
It does “move”, but quite fast. It’s a lot like a laser light show, so your persistence of vision turns it into a relatively solid image if the vectors are simple.
![ILLSLICK X YOUNGOHM - We're The same [Official Video]](http://i.ytimg.com/vi/yUJNkobYR0E/mqdefault.jpg)
Between this and the galvo lens correction video, I am dialed in and ready to go.
Thank you so much, you don't know how tired I am of this problem.
my laser is dead on in the center of the project, but as i get near the corners, the red laser is offset again. If i adjust it at the corner, it messes with the other corners which are also off. I am using the 300x300 lens on a 30w Mopa. My 50 watt regular markers (that look exactly the same but without the MOPA capability) all seem to hit the spot where the laser is pointing no problem. Even with the larger lens. Any tips?
That was excellent thank you I noticed 20 W Fiber Laser. my new one is off just a tiny bit.
I needed this today. Thanks 👍🏼
Awesome, glad to hear!
Here's an issue. following your method. technically should work. which I did. then move the art work an inch to the right or left in the software, red light it, move your test piece so the artwork red light is on the material. then burn the square. now my red light and square of way off. what causes this? I have done the lens correction. it seem the further away from the center, the further off the red light and artwork becomes off.
whats about laser diode like creality falcon? how can I center an engraving circle?
@@GerardoKasevich Use “center origin” - th-cam.com/video/aphiLTUWcjE/w-d-xo.html
@@GerardoKasevich - Or use the center finder tool. docs.lightburnsoftware.com/Tools/CenterFinder.html
@@lightburnsoftware7189 amazing...
Will to values you adjust for the x/y be retained for future jobs or revert back to 0 the next job , do you have to “save” the settings , thanks
They are settings for the laser, stored in your preferences. They’re saved automatically.
How can i change the engraving color? Pllllllz help
I have no idea what license to buy
We would need to know the kind of laser you have to make a recommendation.
Out of curiosity (I don’t own a galvo): is the red line actually moving in real life or is this a video result of the rolling shutter?
It does “move”, but quite fast. It’s a lot like a laser light show, so your persistence of vision turns it into a relatively solid image if the vectors are simple.
Thank you so much!!!