Flipper-Zero running Dual Evil Portal using the AWOK Dynamics Dual ESP32 Mini

Running that “Dulce Dual Evil Portal”. Below are the setup instructions to get everything up and running.
Setting up your computer up to run "FZEasyMarauderFlash" (Windows Users)
1. Download and install "Git for Windows" from gitforwindows....
2. Download and install the latest "VCP Driver" from www.silabs.com...
Setting up your Flipper-Zero SD Card to run Evil Portal
1. Update your Flipper-Zero to the latest version or the "Momentum" firmware
2. Download all the HTML "Portals" at github.com/big...
3. Place all the HTML files on your Flippers SD card at /apps_data/marauder/html/
Configure the ap.config.txt file with the SSID you would like to broadcast and place that file in the Flipper SD card at /apps_data/marauder/
Setting up the "AWOK Dynamics Dual ESP32 Mini" board to run Evil Portal (Windows Users)
1. Download the "FZEasyMarauderFlash.zip" file by SkeltonMan03, from GitHUB at github.com/Ske... by clicking on the green "Code" button at the top, then "Download ZIP"
2. Unzip "FZEasyMarauderFlash.zip"
3. Take note of where the "EasyInstall.py" file is located inside the folder you just unzipped
4. Open a "Command Prompt" and "CD" to the folder with the "EasyInstall.py" file then type easyinstall.py
5. If the Marauder files have not been downloaded to this folder yet, downloads occur automatically
6. Plug the white port into your computer and type in the option/number for "Flash Marauder on AWOK Dual ESP32 Mini (White Port)"
7. Wait for the completion message on your computer then unplug the board from your computer
8. Plug the orange port into your computer
9. If you still have command prompt open, type easyinstall.py again and the program starts back up
10. Plug the orange port into your computer
11. Type in the option/number for "Flash Marauder on AWOK Dual ESP32 (Orange Port)"
12. Wait for the completion message on your computer then unplug the board from your computer
13. Place all the HTML files and the "ap.config.txt" file on the root of another SD card. This card will be used for the SD Card slot on the "AWOK Dynamics Dual ESP32 Mini" board
14. Plug the new SD card into the AWOK board
15. Now you can run two evil portals at once
Running Evil Portal
1. Attached a GPIO board with the "Marauder" firmware flashed to the ESP32 chip
2. Run the "Marauder" app from your flipper
3. In the "Marauder" app, scroll down to "Save to flipper sdcard"
4. Press the Center/OK button
5. Press the right/Yes button twice. This will safe all the data you collect to the SD card on the Flipper-Zero
6. Scroll to "Load Evil Portal HTML file" and press the Center/OK button
7. Scroll to the desired HTML file and press the Center/OK button. You will get a message on the Flipper stating that the HTML portal has been set
8. Sometimes the "ap.config.text" file will not run correctly from the Flippers SD Card. In that case, scroll to "SSID" and choose one of the options. If you want to add a specific SSID, choose "add name". Be aware that when you add a specific name this way, you cannot have any spaces in between the SSID name.
9. Scroll to "Evil Portal", make sure that "start" is highlighted and press the Center/OK button
10. Your SSID is now being broadcast
11. You can retrieve any data you collect on your SD card at apps_data/marauder/logs/. It should be titled "evilportal_xx" where "xx" is a number

[@Thadopeera]

Been starving for a Flipper Awok video 🤣

[@PenTestTuner]

So happy to help.

[@seunglee8398]

Good information.

[@PenTestTuner]

Thank you.

[@RixtronixLAB]

Nice video, thank you :)

[@PenTestTuner]

Happy you like it.

[@MarcellsWorldJjr]

what menu interface is that? 1:12

[@PenTestTuner]

That is the “Compact” Menu Style.

[@bossman999]

I have a problem, when i run the evil portal on the flipper with the wifi devboard, the captive portal does not open when i connect to the ap. Do you know why?

[@PenTestTuner]

I don’t know the exact reason, but I can say it happens to me sometimes, too.

[@bossman999]

@@PenTestTuner Ah man. Thanks for the reply anyways.

[@pro_idzxzxl224]

Could not find /ap.config.txt? :( can help me pls

[@PenTestTuner]

If you cannot find it, just create it and place it in the correct spot.

[@sizzlack095]

if there are more Logins are the other saved or how does it work? because FreeWIFI could login 5 at the same Time but only 1 is saved? so only 1 Family member?

[@PenTestTuner]

All attempts to log in are saved.

[@Noahvvjb]

How can i change between amazon or satarlink or other stuff

[@PenTestTuner]

Watch my video. It explains it all.

[@balkan77forum66]

Can work on some app of wifi

[@PenTestTuner]

It works on the 2.4 GHz spectrum.

[@OhBonezz]

Can I buy your awok plz

[@PenTestTuner]

Hahaha. No way. I love it.