thanks alot for making this vid .. im currently building the plotclock and couldnt find any assembly instructions anywhere ! thanks to you i can continue !
Just a note. In the video when you connect the Clock Module up to the Arduino shield, you mistakenly connect SDA and SCL to A4 and A5 signal on the shield. It needs to be connected to the SCL and SDA pins which are just to the right of the ones you connected to. Otherwise, the clock module will not properly initialize the chip.
If you had spent more effort on the project would you be able to refine the numbers looks? I have started the same project but use my 3d printer for parts. Thanks for you presentation.
I bought this kit . Sad that no clock was included. And had much problem with code errors and Arduino missing library problems. Can a Uno board make time with no add on clock module, I don't know because most things written about Arduino do not make sense.
i will try to make this with whatever materials i can get. except it won't use this code; i will try to code it myself and i will make it controllable with a joystick in all 8 directions. so i can draw on it myself :)
there are only three servos, that gives you a maximum of 3 directions, but one servo is used for lifting so you cant really draw with that. what 8 directions do you mean?
@@dylancole7664 i didnt even try to make it because i am a useless moron. But anyways what I ment the 8 directions is : up left right down and the four diagonal lines.
Arduino: 1.8.10 Hourly Build 2019/08/02 12:33 (Windows 10), Board: "Arduino/Genuino Uno" C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino: In function 'void setup()': plotclock_V1:69:3: error: 'setTime' was not declared in this scope setTime(19,24,0,0,0,0); ^~~~~~~ C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino:69:3: note: suggested alternative: 'isotime' setTime(19,24,0,0,0,0); ^~~~~~~ isotime C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino: In function 'void loop()': plotclock_V1:87:19: error: 'minute' was not declared in this scope if (last_min != minute()) { ^~~~~~ C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino:87:19: note: suggested alternative: 'init' if (last_min != minute()) { ^~~~~~ init plotclock_V1:91:5: error: 'hour' was not declared in this scope hour(); ^~~~ exit status 1 'setTime' was not declared in this scope This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences. plz help me how to fix this error
error at uploading, what to doArduino: 1.8.3 (Windows 7), Board: "Arduino/Genuino Uno" C:\Users\Dr. WASANTHA\AppData\Local\Temp\Temp1_plotclock.zip\plotclock\plotclock.ino: In function 'void setup()': plotclock_:120: error: 'setTime' was not declared in this scope setTime(19,38,0,0,0,0); ^ exit status 1 'setTime' was not declared in this scope This report would have more information with "Show verbose output during compilation" option enabled in File -> Preferences.
Be sure you only have 1 tab opened in the Arduino enviroment. If you have a second one, it's trying to load that one too. Only have the PlotClock.ino tab open then upload to your Uno. This will take care of this issue.
thanks alot for making this vid .. im currently building the plotclock and couldnt find any assembly instructions anywhere ! thanks to you i can continue !
HOLY **** THATS COOL!!!
Just a note. In the video when you connect the Clock Module up to the Arduino shield, you mistakenly connect SDA and SCL to A4 and A5 signal on the shield. It needs to be connected to the SCL and SDA pins which are just to the right of the ones you connected to. Otherwise, the clock module will not properly initialize the chip.
This comment save lifes...
you mean I have to solder pins on the right holes ?
ah i got it! SDA to A4, SCL to A5 works!
If you had spent more effort on the project would you be able to refine the numbers looks? I have started the same project but use my 3d printer for parts. Thanks for you presentation.
How did it turnout?
I bought this kit . Sad that no clock was included. And had much problem with code errors and Arduino missing library problems.
Can a Uno board make time with no add on clock module, I don't know because most things written about Arduino do not make sense.
my sister will love it
What is the battery for the DS3231 RTC? CR2032 or it needs a LIR2032?
OMG this is so awesome.
can you make a cnc 3d printer with sparw parts but not from dvd please
very good project
Ultimate
Are the 3d printed parts included?
Pls answer
what is the difference between DS1307 & DS 3231 RTC ??!
i will try to make this with whatever materials i can get. except it won't use this code; i will try to code it myself and i will make it controllable with a joystick in all 8 directions. so i can draw on it myself :)
there are only three servos, that gives you a maximum of 3 directions, but one servo is used for lifting so you cant really draw with that. what 8 directions do you mean?
@@dylancole7664 i didnt even try to make it because i am a useless moron. But anyways what I ment the 8 directions is : up left right down and the four diagonal lines.
Thanks,
please i need this project
. " how to make a simple Arduino based clock using an 7 SEG and a real time clock. "
add 1 stepper motor and a 3d pen and you can make a 3d printer
Fun project !!! {:>)
coooooooooooooooool
💪😜💪😜💪😜💪😜💪😜💪
how can i do it with ds1302 rtc?
i had losed tthe program :( where can i found it' ? please!!
Check the following website: www.thingiverse.com/thing:248009
Wowww
Can u put the comands here? I need them pliz
do u have the source code?
Can i do this with a pic16f887?
I haven't tried it but I think you can.
I love Plot clock, so I improve a little bit, check it out here th-cam.com/video/asZtNeiSG_w/w-d-xo.html
Great work! Unfortunately you don't share the code in order to try it.
Arduino: 1.8.10 Hourly Build 2019/08/02 12:33 (Windows 10), Board: "Arduino/Genuino Uno"
C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino: In function 'void setup()':
plotclock_V1:69:3: error: 'setTime' was not declared in this scope
setTime(19,24,0,0,0,0);
^~~~~~~
C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino:69:3: note: suggested alternative: 'isotime'
setTime(19,24,0,0,0,0);
^~~~~~~
isotime
C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino: In function 'void loop()':
plotclock_V1:87:19: error: 'minute' was not declared in this scope
if (last_min != minute()) {
^~~~~~
C:\Users\Dushmantha\Downloads\Compressed\code\files\plotclock_V1\plotclock_V1.ino:87:19: note: suggested alternative: 'init'
if (last_min != minute()) {
^~~~~~
init
plotclock_V1:91:5: error: 'hour' was not declared in this scope
hour();
^~~~
exit status 1
'setTime' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
plz help me how to fix this error
I didn't do try this project or view the code but I think u didn't install all the library
someone could tell me where can i download the plastic parts of the clock ?
Check the video description
www.thingiverse.com/thing:248009
得力 白板笔
Send me the code plz.🥺
Plz send code
error at uploading, what to doArduino: 1.8.3 (Windows 7), Board: "Arduino/Genuino Uno"
C:\Users\Dr. WASANTHA\AppData\Local\Temp\Temp1_plotclock.zip\plotclock\plotclock.ino: In function 'void setup()':
plotclock_:120: error: 'setTime' was not declared in this scope
setTime(19,38,0,0,0,0);
^
exit status 1
'setTime' was not declared in this scope
This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
Be sure you only have 1 tab opened in the Arduino enviroment. If you have a second one, it's trying to load that one too. Only have the PlotClock.ino tab open then upload to your Uno. This will take care of this issue.