I must admit! Your video was well explained, simple & in people watch & listen ITS SO MF EASY!!!! After body shop telling me the “whole headlight” would have to be replaced, one headlight being more than $1700, I wasn’t doing it so I asked for my car back! Stuck with no option but to try and figure it out, I found the cap under the hood and the back of the light! Started digging around on TH-cam & found you!!! Thank you! For my non mechanic & non engine knowledge, single mom, no man around your video helped me changed my bulbs!! $28 later I got headlights!!! THANK YOU KIND SIR YOU’RE MF AMAZING!!!!
This video was absolutely what I needed! You supplied all the information I required, including (but not limited to), removal of the old bulb and installing the new one, and the price of a new bulb and where to purchase it (at a significantly lower price!) Thank you so much!!
I love the little hints along the way (seems like you have experience from past mistakes/success), but those tips and tricks make all the difference in the world. Thanks for sharing your knowledge, Sensei!
Thanks! I like to do things myself and I want to share my knowledge and experiences. This was a first time on these, so I basically did it with you. I'm just getting started with these videos, so as soon as I can get my "trusty assistant" to help me start editing videos, I will be posting more. Thanks again for the feedback!
The light switch part is funny..🤣😂. Thanks...this is the first time in 11 yrs I will have had to change a headlight bulb. Wow...unheard of in a American made vehicle.
Thanks for the video, just changed out the two original HIDs from my 2011 Camaro after 113k miles. Took me less than 5 minutes. This video was a huge help!
My husband has a 2015 Camaro RS... Drivers side bulb was out, he watched your video.... literally took him 5 minutes to change it, all came out really easy, even the clamp holding the bulb... so he actually changed the other one almost as quickly, he got his off amazon for 30 bucks.... so we will see how long it will last... Thanks for the video. He’s a happy camper,
You are the man I went to two auto stores and no one knew about the plastic on how to get off or buy a new and went to mechanic shop tuffy and they didn’t know either you are the man
Great tutorial! Now I feel like I can get in there and change the lights. Heard that wheels have to be a certain direction and the whole bumper thing, too. so this is good to see and learn from.
Good video, my 2012 2SS has the black connecting ring and it was the only hard part because it didn't want to turn, I have a very old flathead that I never use because the tip is rounded off and it worked good against the plastic part of the ring that protrudes from it. It was very humid today and after I got the new one in there was some light condensation on the inside of the lens, went over it with a heat gun on low and it cleared right up. Thanks for your help.
This is an absolutely perfect video. Saved me $300+ (dealer quote). I have a 2013 2SS with RS package and this video worked perfectly, explanation was awesome. My access to light was a little tighter due to engine being a V8, but process is the same. I cant thank you enough. It was hard getting the wiring plug off the existing bulb but as you said a screwdriver and a little patience and it came off. I purchased a Sylvania HID Xenon D1S (35W) bulb from Auto Zone. List price was $99.99 but they price matched Amazon at $79.99 and the color matched perfect. I am original owner and my other light was stock, this Sylvania matched color perfectly. Thanks again, this was such a relief saving me hundreds of dollars. I am not handy at all and this was simple to do.
Hey bro I know this is a little late but what wxactly did you do to get the wiring plug off of the bulb? It’s super tight in the engine bay and I can’t really do it with a screw driver
Not too late bud, this is what its all about! Just like the video shows, that metal plug has to be squeezed, it has a spring action to it, and then a small screwdriver to pry it off a little. They are tight the first time and if you dont hold that spring action in at the same time, it wont happen. Watch the video closely at that point, that was litterally the first time I did it. Good luck!
Agreed! Just put the locking ring between locked and unlocked (right in the middle) and then pull up away from the bulb and it should pop right off. Minimal struggle.
Perfect, you pointed out that you do NOT turn the light bulb and DO turn the locking ring. I only found this out after breaking the first bulb i tried to put in.
Thank You soooooo much! You saved me money with the link for the headlights and your instructions are crystal clear. And you probably saved me a traffic ticket cause I was driving with one headlight for months then the other went out. Thanks again!!
Have had such a hard time with mamas 2015 Camaro RS and her headlight bulbs. Thank you for the video. Opened the hood and saw the bulbs and thought what in the hell is this and how do I get them out.
Thanks alot ! Have looked all over youtube and all are garbage. Most videos are poor quality. Your video wasvery detailed and exactly what i was looking for. Thanks again! I got a 2010 ss but looks just about the same.
Thanks David. Thats exactly why I made this video, because I was looking for one myself. Not sure if 2010 is the same or not. Should be similar as long as there is access. You may have to remove the air box and washer bottle with the V8. Good luck!
Hey David, A year ago You responded to Shumanator's Garage about your 2010 SS Camaro headlight. Were you able to get the D3S 5000k to work or did you have to use D1S?
@@shumanatorsgarage8921 So did you guys light also turned on for like 15 sec and then turns off after too? Or is it just mine that's doing that? Not really sure just want to make sure it's just the bulb and not a fuse or cable.
If your referring to the original factory bulb, no mine just went out. If your is turning on for 15 seconds and then going out, it would not be a fuse. Sounds like it might be getting hot and shutting down. I would check the bulb and see what it looks like. Also check the color when it does come on, and compare to the other side. If its turning pink, its bad.
@@shumanatorsgarage8921 it does. From white then slowly goes to pink then it turns off after 15 sec. So why you say is bad? Any idea on why it does that?
No, I don't think they will work. Appears you may need the D1S, but please do your own research before you make a purchase. I removed my bad one to look at it before I ordered them.
Do both bulbs have to be good in order for lights to work or can you put just one new bulb on to see if that light bulb will turn on. Asking cause both my lights don't work only if I keep turning off and on on auto they will end up coming on
They should work independently. You can change one at a time. If they come on automatically and don't go out prior to you shutting them off, then Its probably not a bulb issue. You might want to test the switch. If it's on auto, obviously make sure it's dark. As you see in the video, I had to turn them on manually to test them, in the daylight.
Thank you so much for this video! I have replaced the bulb but it keeps going out a couple of minutes after the lights turn on. I’m thinking it might be the wiring at this point
Thanks for making this video. After I changed it the bulb there is a sound that I can hear - high pitch beep noise- with little bit of burning smell. I used the Phillips one on to the 2014 Camaro. Is that normal? Please help. Thanks.
No, that does not sound normal. You need to try to determine exactly where the sound and smell are coming from. Maybe the new bulb is bad, or there may be another issue, (such as the ballast for example,) which you need to diagnose. You may need to take to a mechanic if you cannot figure it out.
Thank you so much! Am going to start this project today. Do you also have a video to replace the halo? That one is burnt out, too - or is that part of the headlight bulb?
I've been reading about replacing the OG halos for the colored Oracle's and it seems you have to bake (literally) the headlight set, warm it, unglue it and brake it apart in order to have access to halos. Too risky for my skills level. 😅🤞
I can’t do it in 5th gen ss too many wires around plus the big computer box 😫 on the passenger side but the driver side looks much easier I really want to try to remove some of the wires around but I don’t want it I don’t know if it possible I rather remove the bumper to pull the headlight off .
I want to change mine. I hate the bulb its not bright enough and where im at we've been getting alot of rain lately. So i want to change it from the bulb to hid or led. Would that work ?
You cannot install a xenon bulb in a non-xenon lamp. There are aftermarket conversion kits out there, however I am not familiar with them and cannot make any recommendations.
Halogen assemblies are awesome for upgrades. Never go for the RS package like I did. Morimoto lighting, and diodedynamics sell several conversion kits to upgrade to LED from halogen lamps. Super simple plug and play. Never go to HID lights. They are too expensive, and difficult to mess with. LED puts out the same light, beam pattern, color, and everything, and even shine further without blinding other drivers. I recommend looking into those sites I mentioned, and picking a conversion kit you want, you can even add the Halo lights fairly easily too. I'm currently trying to retrofit my 2010 2SS with halogen assemblies so I can upgrade to LED with ease, and save about 850 bucks. I hope all that helps in some way.
Looks like you can buy those but I dont know what it takes to get to the other end or what caused it to melt in the first place. Could have been the bulb or the ballast.
Does anyone know if I can buy that little white clip anywhere? The guy at the dealership checked my lights and all of a sudden my clip is missing I haven’t messed with that light at all neither has anyone else because it’s never had to be replaced then he tells me I have to buy a whole new headlight which is $1100 so I went to AutoZone and purchased one bulb for $160 and put it in myself and rigged it so it stays in place. I put the dust cap back on and started calling the junkyards to see if any of them have that clip but so far no luck. Does anyone have a suggestion on where I can order one of those white clips that hold the light in place?
The passenger side went out a few weeks ago. Lasted right about 3 years. For the price Im good with that. Driver side still as bright as day one. I am going to order another pair
Any time your changing bulbs on a car, wear gloves! The slightest oil from your skin, will lower the life of the bulb. I've seen some explode due to oil getting on the bulb. So to make sure it doesn't happen, just wear rubber gloves.
A little over 3 years and one side went out. The same ones were not available so I bought a pair from another vendor about the same price. Replaced both and kept the one good one as a back up.
Actually I was about to make an update comment. The passenger side just went out about a week ago. Halo is still working and I havent had a chance to look at the bulb yet but its likely the bulb. Still well worth the savings in my opinion. I will order the same ones if still available.
@@hungary11 Right about 3 years. I made the video in January 2019. The original OEM bulb was just over 5 years old when it blew. The Amazon bulb on the driver side is still working nice and bright
I did everything step by step as you did and bought the amazon HID’s you put up The lightbulbs Came working well, But is the driver side headlight that won’t turn on once I connected it to the gray cable it won’t turn on. I tested of the bulbs with the passenger side that are working well , so the bulbs aren’t the problem It just seems when I connect it to the gray cable it won’t work after that. Any suggestions? Thank you for your amazing video by the way it helped a lot
Well, without being there its hard to say. You need to be sure the wiring harness is not damaged including the plug itself. If that same bulb works on the other side of the car, then its obviously not the bulb / ignitor, and likely not the switch. Check your high and low beams and see what happens. Could be a ground issue or a module, or a ballast.
I did not disconnect the battery, but it's probably not a bad idea. Usually a recommended safety measure. Either way you need to be careful as there is high voltage stored even with the battery disconnected.
![THE TOYS x NONT TANONT - ดอกไม้ที่รอฝน (spring) [Official MV]](http://i.ytimg.com/vi/pPa1d5cC8M4/mqdefault.jpg)
![คุณอาเรียโต๊ะข้างๆ พูดรัสเซียหวานใส่ซะหัวใจจะวาย ตอนที่ 4 [ซับไทย] 【Ani-One Thailand】](http://i.ytimg.com/vi/_vK_cden2f8/mqdefault.jpg)
Not all heros wear capes! But Mine Also Drives Camaro!
I must admit! Your video was well explained, simple & in people watch & listen ITS SO MF EASY!!!! After body shop telling me the “whole headlight” would have to be replaced, one headlight being more than $1700, I wasn’t doing it so I asked for my car back! Stuck with no option but to try and figure it out, I found the cap under the hood and the back of the light! Started digging around on TH-cam & found you!!! Thank you! For my non mechanic & non engine knowledge, single mom, no man around your video helped me changed my bulbs!! $28 later I got headlights!!! THANK YOU KIND SIR YOU’RE MF AMAZING!!!!
Thanks for the kind words and the feedback. That makes it all worth it! Glad I could help and glad you were able to get it fixed!
This video was absolutely what I needed! You supplied all the information I required, including (but not limited to), removal of the old bulb and installing the new one, and the price of a new bulb and where to purchase it (at a significantly lower price!) Thank you so much!!
Thank you! You saved me lots of time, money, and frustration.
Your welcome, happy to hear it!
I love the little hints along the way (seems like you have experience from past mistakes/success), but those tips and tricks make all the difference in the world. Thanks for sharing your knowledge, Sensei!
Thanks! I like to do things myself and I want to share my knowledge and experiences. This was a first time on these, so I basically did it with you. I'm just getting started with these videos, so as soon as I can get my "trusty assistant" to help me start editing videos, I will be posting more. Thanks again for the feedback!
Well, he ain't no spring chicken! No more lol
Thanks so much for this! I searched a while to find a helpful video for my headlight replacement, and this was perfect!
Thank you for posting this video. I was so confused. I spend good 2 hours trying to take it out. Thanks again
The light switch part is funny..🤣😂. Thanks...this is the first time in 11 yrs I will have had to change a headlight bulb. Wow...unheard of in a American made vehicle.
Thank you!
Thank you for the video it really helped a lot.
This is the best video on how to replace that bulb. It allowed me to see everything and what to do if the silver thing won’t release easily
Thanks for the feedback!
Thanks for the video, just changed out the two original HIDs from my 2011 Camaro after 113k miles. Took me less than 5 minutes. This video was a huge help!
Thats great! Thanks for the feedback!
I have 70k on my 2014 Camaro SS and my driver side bulb just went out.
That's crazy! Mine went out on my 2010 at 115k miles.
Thank you !! i was searching for these detailed replacment for too long ,u helped alot and saved me alot of time .
Saved me couple hours! Thanks bud!
My husband has a 2015 Camaro RS... Drivers side bulb was out, he watched your video.... literally took him 5 minutes to change it, all came out really easy, even the clamp holding the bulb... so he actually changed the other one almost as quickly, he got his off amazon for 30 bucks.... so we will see how long it will last... Thanks for the video. He’s a happy camper,
What is the link for the bulbs you ordered.
Glad to hear it! Thanks for the feedback! My bulbs are still working like new.
You are the man I went to two auto stores and no one knew about the plastic on how to get off or buy a new and went to mechanic shop tuffy and they didn’t know either you are the man
Thanks for the feedback! Glad I could help!
Thank you so much! Same exact setup in my 2013 RS. Getting that clip off was a pain in the ass though lol
Thank you so much for this tutorial. Extremely helpful!
Great tutorial! Now I feel like I can get in there and change the lights. Heard that wheels have to be a certain direction and the whole bumper thing, too. so this is good to see and learn from.
Lol, yes the wheels have to be perpendicular to the ground! Good luck and thanks for the feedback, and the laugh!
My 2014 2 SS hids just went out , this just made everything so smooth , thank you !
same car same situation
Is the HID the main bulb or is it the halo?
Thanks, very helpful...my passenger side went out it look tough to change I'm glad you showed that side. Great video!!!
Thanks for the feedback!
Great video! I couldn’t find it anywhere else and it helped out a whole lot!
Thats great! Thanks for the feedback!
Your video helped me a lot. Thank you so much!!
Great video! Very helpful, will make things a lot easier for me.
You could just reach around the fuse box!🤣😂 this dude is not going to take anything apart if he doesn’t have to, great vid
You are a life saver!! Thank you for this very informative video. Great job!
Thanks for the feedback!
Good video, my 2012 2SS has the black connecting ring and it was the only hard part because it didn't want to turn, I have a very old flathead that I never use because the tip is rounded off and it worked good against the plastic part of the ring that protrudes from it.
It was very humid today and after I got the new one in there was some light condensation on the inside of the lens, went over it with a heat gun on low and it cleared right up.
Thanks for your help.
That's great! Thanks for the feedback!
Awesome video. You saved me a ton of time! Thank you for the lesson
Your welcome! Im happy to hear that and thanks for the feedback!
Had one out and replaced both. GREAT video! Thanks! 2014 RS 2LT...
Thank you
Excellent video. thanks for doing that and sharing with everyone.
This video was really helpful, thank you so much.
This is an absolutely perfect video. Saved me $300+ (dealer quote). I have a 2013 2SS with RS package and this video worked perfectly, explanation was awesome. My access to light was a little tighter due to engine being a V8, but process is the same. I cant thank you enough. It was hard getting the wiring plug off the existing bulb but as you said a screwdriver and a little patience and it came off. I purchased a Sylvania HID Xenon D1S (35W) bulb from Auto Zone. List price was $99.99 but they price matched Amazon at $79.99 and the color matched perfect. I am original owner and my other light was stock, this Sylvania matched color perfectly. Thanks again, this was such a relief saving me hundreds of dollars. I am not handy at all and this was simple to do.
Thats great to hear! Thanks for the feedback!
Hey bro I know this is a little late but what wxactly did you do to get the wiring plug off of the bulb? It’s super tight in the engine bay and I can’t really do it with a screw driver
Not too late bud, this is what its all about! Just like the video shows, that metal plug has to be squeezed, it has a spring action to it, and then a small screwdriver to pry it off a little. They are tight the first time and if you dont hold that spring action in at the same time, it wont happen. Watch the video closely at that point, that was litterally the first time I did it. Good luck!
@@shumanatorsgarage8921 like I can’t even get the compartment out of the little space you said twist counter clockwise and what else?
@@OmarGonzalez-lf1eq Im sorry buddy, I dont know how else to explain it. Everything I know about it is in the video.
I'm installing my headlights and fog lights I ordered overnight from Amazon. Thanks for the clear instructions. Much oblige.
Thanks for the feedback!
Best video Iv found.. thanks saved me a lot of time..
For those wondering how to get the locking ring off, just pull it straight back and it will come off. No need to turn to a side.
Agreed! Just put the locking ring between locked and unlocked (right in the middle) and then pull up away from the bulb and it should pop right off. Minimal struggle.
Thanks for the help bro! Greatly appreciated!
Perfect, you pointed out that you do NOT turn the light bulb and DO turn the locking ring. I only found this out after breaking the first bulb i tried to put in.
Oh dang, sorry to hear you broke a bulb, but yeah its a process for sure.
Thanks for the in-depth tutorial
Your welcome! Thanks for the feedback!
Quality video with attention to detail. Thanks Man!
Thank you!
This is what I needed! Thank you!
Thank You soooooo much! You saved me money with the link for the headlights and your instructions are crystal clear. And you probably saved me a traffic ticket cause I was driving with one headlight for months then the other went out. Thanks again!!
You"re welcome! Thanks for the feedback!
Could not figure out how to get that plastic ring off, i was scared about breaking it. But thanks to you, you showed how easy it is, thanks again bro.
Awesome! Thank you
I am unable to get the plastic covers off. It looked like you had no problem at all. I swear they glued mine on.
Should just be a counterclockwise twist.
Thanks man! Super helpful 👌
Thanks man. I appreciate the help.
Have had such a hard time with mamas 2015 Camaro RS and her headlight bulbs. Thank you for the video. Opened the hood and saw the bulbs and thought what in the hell is this and how do I get them out.
Thanks alot ! Have looked all over youtube and all are garbage. Most videos are poor quality. Your video wasvery detailed and exactly what i was looking for. Thanks again! I got a 2010 ss but looks just about the same.
Thanks David. Thats exactly why I made this video, because I was looking for one myself. Not sure if 2010 is the same or not. Should be similar as long as there is access. You may have to remove the air box and washer bottle with the V8. Good luck!
Hey David,
A year ago You responded to Shumanator's Garage about your 2010 SS Camaro headlight.
Were you able to get the D3S 5000k to work or did you have to use D1S?
thanks bro, super clear video
Your welcome. Thanks for the feedback!
the ss has plenty of room also thank you big help
Very informative, thank you.
Thank you for this video. You saved me so much money
Happy to hear that! Thanks!
Thank you for posting.
Great video, so helpful! Followed your instructions step by step and it was a smooth installation for my 14 Camaro RS.
That's great! Thanks for the feedback!
i have had my camaro for 3 yrs, and it is time to replace them also
You should put the demon red ones in for looks. Nice video!
Thanks your video is great. I was able to do both headlights on my 2010 in less time then it took to smoke my cigarette.
Thats great! Lol. Thanks for the feedback!
Good video Shumanator
Awesome video, thanks for the help
Glad to help, thanks!
Excellent video!
Thank you!
Great job
I just did this too!! AutoZone has the bulbs for $150 and I didn't even bother asking a GM dealer for them...like you, I went to Amazon.
Its been a couple weeks and still light up. I think they are a little clearer or whiter light than the originals, which I like.
@@shumanatorsgarage8921 So did you guys light also turned on for like 15 sec and then turns off after too? Or is it just mine that's doing that? Not really sure just want to make sure it's just the bulb and not a fuse or cable.
If your referring to the original factory bulb, no mine just went out. If your is turning on for 15 seconds and then going out, it would not be a fuse. Sounds like it might be getting hot and shutting down. I would check the bulb and see what it looks like. Also check the color when it does come on, and compare to the other side. If its turning pink, its bad.
@@shumanatorsgarage8921 it does. From white then slowly goes to pink then it turns off after 15 sec. So why you say is bad? Any idea on why it does that?
What type of bulb like the code or number on the bulb
Thanks brother I needed that
Glad it helped! Thanks for the feedback!
Thank you sir!!!
Thank you very much for this video
Thanks for the feedback!
Thank you! 🎊👍🏼🎉🔥🔥
I really appreciate your help
Do you happen to know if the D3S 5000k will fit 2010 SS?
No, I don't think they will work. Appears you may need the D1S, but please do your own research before you make a purchase. I removed my bad one to look at it before I ordered them.
Thank you i didn’t know what to do with that damn clip lmao
Your welcome! Thanks for the feedback!
Think my fuse must be blown. Replaced mine and it didn’t do anything, one is completely out while the other shows a little life. Not sure what to do.
Anybody knows where or what the white ring is called, that makes the lights stuck in place ?!
Do both bulbs have to be good in order for lights to work or can you put just one new bulb on to see if that light bulb will turn on. Asking cause both my lights don't work only if I keep turning off and on on auto they will end up coming on
They should work independently. You can change one at a time. If they come on automatically and don't go out prior to you shutting them off, then Its probably not a bulb issue. You might want to test the switch. If it's on auto, obviously make sure it's dark. As you see in the video, I had to turn them on manually to test them, in the daylight.
Great help
Thanks!
Thank you!
Thank you so much for this video! I have replaced the bulb but it keeps going out a couple of minutes after the lights turn on. I’m thinking it might be the wiring at this point
Not sure about that one. Maybe the ballast?
@@shumanatorsgarage8921 hello I just wanted to come on here and let you know that it was the ballast. Thanks for your input!
@@iz6962 Your welcome and thanks for the update! Thats good information.
Thanks for making this video.
After I changed it the bulb there is a sound that I can hear - high pitch beep noise- with little bit of burning smell.
I used the Phillips one on to the 2014 Camaro.
Is that normal? Please help.
Thanks.
No, that does not sound normal. You need to try to determine exactly where the sound and smell are coming from. Maybe the new bulb is bad, or there may be another issue, (such as the ballast for example,) which you need to diagnose. You may need to take to a mechanic if you cannot figure it out.
Where did you order the bulb from
THANK YOU!!!!!!👍
Thank you so much! Am going to start this project today. Do you also have a video to replace the halo? That one is burnt out, too - or is that part of the headlight bulb?
I honestly don't know if the halo is serviceable or not. I have not run into that yet.
I've been reading about replacing the OG halos for the colored Oracle's and it seems you have to bake (literally) the headlight set, warm it, unglue it and brake it apart in order to have access to halos. Too risky for my skills level. 😅🤞
There high low bulbs correct?
I can’t do it in 5th gen ss too many wires around plus the big computer box 😫 on the passenger side but the driver side looks much easier I really want to try to remove some of the wires around but I don’t want it I don’t know if it possible I rather remove the bumper to pull the headlight off .
I have a 5th gen SS and it was easy as shit to get to both sides. Lol didn't have to remove the fuse box or anything
I want to change mine. I hate the bulb its not bright enough and where im at we've been getting alot of rain lately. So i want to change it from the bulb to hid or led. Would that work ?
You cannot install a xenon bulb in a non-xenon lamp. There are aftermarket conversion kits out there, however I am not familiar with them and cannot make any recommendations.
Halogen assemblies are awesome for upgrades. Never go for the RS package like I did. Morimoto lighting, and diodedynamics sell several conversion kits to upgrade to LED from halogen lamps. Super simple plug and play. Never go to HID lights. They are too expensive, and difficult to mess with. LED puts out the same light, beam pattern, color, and everything, and even shine further without blinding other drivers. I recommend looking into those sites I mentioned, and picking a conversion kit you want, you can even add the Halo lights fairly easily too. I'm currently trying to retrofit my 2010 2SS with halogen assemblies so I can upgrade to LED with ease, and save about 850 bucks. I hope all that helps in some way.
Do you happen to know if that braided wire is replaceable? I went to change my bulb and the connector is melted
Looks like you can buy those but I dont know what it takes to get to the other end or what caused it to melt in the first place. Could have been the bulb or the ballast.
Does anyone know if I can buy that little white clip anywhere? The guy at the dealership checked my lights and all of a sudden my clip is missing I haven’t messed with that light at all neither has anyone else because it’s never had to be replaced then he tells me I have to buy a whole new headlight which is $1100 so I went to AutoZone and purchased one bulb for $160 and put it in myself and rigged it so it stays in place. I put the dust cap back on and started calling the junkyards to see if any of them have that clip but so far no luck. Does anyone have a suggestion on where I can order one of those white clips that hold the light in place?
You can't get it from the dealership??
any follow-up now on the longevity and brightness?
Yes, Passenger side went out a few weeks ago, so right about 3 years. Driver side still nice and bright white.
Would this fit the 6th Gen also.
I dont know
Has anyone done a LED replacement ? And if so is it better
Can you post the link for the light bulb on Amazon
I added the link in the description box. You select whatever color you want. I used the 5000k and very happy so far. Pure white. Not blue.
After 3 years, how are the lights doing?
The passenger side went out a few weeks ago. Lasted right about 3 years. For the price Im good with that. Driver side still as bright as day one. I am going to order another pair
So could that be a reason why mine aren’t that bright
Where can I get the plug in wire for the bulb
You can get them online pretty reasonable. Ballast Harness or cable. I dont have any recommendations as I have not needed one. Do your own reasearch.
Any time your changing bulbs on a car, wear gloves! The slightest oil from your skin, will lower the life of the bulb. I've seen some explode due to oil getting on the bulb. So to make sure it doesn't happen, just wear rubber gloves.
Will the bulbs in the link work for a 2015 Camaro RS
Cant say for sure, but if you have HID headlamps then they should.
@@shumanatorsgarage8921 Thanks
Did they work?
How long did they last you?
A little over 3 years and one side went out. The same ones were not available so I bought a pair from another vendor about the same price. Replaced both and kept the one good one as a back up.
So how are those lightbulbs holding up are they still working how long did they last?
Actually I was about to make an update comment. The passenger side just went out about a week ago. Halo is still working and I havent had a chance to look at the bulb yet but its likely the bulb. Still well worth the savings in my opinion. I will order the same ones if still available.
@@shumanatorsgarage8921 So how long did it last?
@@hungary11 Right about 3 years. I made the video in January 2019. The original OEM bulb was just over 5 years old when it blew. The Amazon bulb on the driver side is still working nice and bright
@@shumanatorsgarage8921 great thank you!
How long did they last and are they d1s
They are D3S 5000k and are still working great!
Ok thanks
This video makes it seem soo easy but I can’t get my hid bulb to even turn. Lol I really don’t want to remove the whole bumper
Damn. I completely forgot about my cold air intake that my friend installed. I'll have to take that box out before I can even see the bulb.
Are they still working?
Yes! Still working great!
Low beams? Or high beams ?
This is the HID Xenon bulb on the RS 2LT..you need to check yours and be sure what you have.
I did everything step by step as you did and bought the amazon HID’s you put up The lightbulbs Came working well, But is the driver side headlight that won’t turn on once I connected it to the gray cable it won’t turn on. I tested of the bulbs with the passenger side that are working well , so the bulbs aren’t the problem It just seems when I connect it to the gray cable it won’t work after that. Any suggestions? Thank you for your amazing video by the way it helped a lot
Well, without being there its hard to say. You need to be sure the wiring harness is not damaged including the plug itself. If that same bulb works on the other side of the car, then its obviously not the bulb / ignitor, and likely not the switch. Check your high and low beams and see what happens. Could be a ground issue or a module, or a ballast.
ya, All RS are V-6; not V-8. So, do I need to disconnect the battery prior to removal and install??
I did not disconnect the battery, but it's probably not a bad idea. Usually a recommended safety measure. Either way you need to be careful as there is high voltage stored even with the battery disconnected.
@@shumanatorsgarage8921 ever changed out that RS badge on the front grill?? OR I wonder if I could just paint it red again
No I have not. Looks pretty easy to remove though. And I'm sure it could be painted.
What bulbs are they I got the same car
There is a link in the video description to the ones I purchased, but you need to look at what you have and be sure.
@@shumanatorsgarage8921 thank you I appreciate it
Mine went out last week....what the heck??😅 everyone headlights are burning out after 3 years or what???
Mine lasted 9 years (lucky me?)
Mine is 11 years old
My lights on my 2014 always falling out anybody else have this problem??