Got frustrated after an hour of trying to figure out how to remove this 20 yr old faucet from beneath. Found your short and to-the-point video very quickly. Really generous of you to post this solution. Saved me (and just about everyone else here, I guess) so much time and money. You rock! Thank you!
Thanks for making this video. Spent five minutes underneath trying to unscrew the same type of faucet from underneath. Figured there was probably a TH-cam video out there showing the easy way to take it apart, and sure enough, yours was the one.
I'd give this guy 10 stars if I could. I, like others, spent too much time trying to remove the old Grohe faucet. This short video gave me the basic layout I need to remove the faucet. Thank you!!!
I have this exact faucet that needed to be replaced. I'm used to having to remove them from underneath. I couldn't figure out how to get this one out. Then I found your video and it saved my life. I never would have figured this out on my own. Thank you so much! Great video!
Thank you so much for this video. I tried to remove our faucet from underneath for a while and realized the physics didn't work. Your video saved so much time and drastically reduced the cuss words echoing throughout our house.
You sir, are a life saver. Or at least a stomach saver. I have positional vertigo and you saved me a day of sickness by not having to unnecessarily having to crawl under the sink. Thank you!
God damn. Thanks so much for this. My brother in law and I spent so much time trying to figure out how to get this faucet off. All other bathroom and sick faucets have a nut that you simply unscrew so we were very confused about the Grohe design since there was not nut. Thanks a lot!
I think you are about to save my life here- thank you 🎉 But I am stuck … my spout doesn’t slide off with ease like yours did, and I don’t have enough room to turn it very far. Help!
So I have a similar Grohe,the whole faucet is loose at the base,either something is broke or underneath, or it just came loose like your doing,just tightening from the top may work.. correct????.thanks
thanks for the video, its coming out! paid $65010 yr ago nice faucet until the rubber trigger disintegrated, then the brush nickel finish started pealing on the spout, then the trigger completely failed, replacement cost for just the plastic plated sprayer was $219.00 now the BN finish is bubbling off the handle hub! super disipointing. i would rather replace 4 cheep faucets then get played like that again.
I have one of these at home also. Rubber peeling off the sprayer button like you said. And it's a replacement sprayer already. These have been a favorite of mine, but some other brands have some pretty nice spray patterns that just might cause me to upgrade. More realistically I'll replace someone's faucet that has a good sprayer head and use it on mine.
Our problem is getting the top part off, you so easily pull it off at the beginning, but the top of our Grohe kitchen faucet (the neck) is not just pulling off, no matter what my husband does. Yes, he already disconnected the sprayer hose. He called Grohe and they said to just pull up, but it's obviously hitting something inside, no matter how hard he pull up. He has put lubricant ...
I don't know if you have solved this by now, if not: We had the same issue with our faucet neck not pulling off. The solution was brute force using a mallet to pound up on the faucet (in the center of the curve) while another person was holding the base down (to avoid stressing the underneath mounting. It took a several aggressive swings but the neck eventually was driven up and removed from the base.
The grohe heads connect differently then any other I've seen. I'd say it's highly unlikely you will find anything other than grohe to replace this. The rubber prob wore out on the sprayer, huh.
![How To Remove/Uninstall A GROHE Kitchen Faucet Or Mixer❗[Full Tutorial]](http://i.ytimg.com/vi/HRZ1QOinJsE/mqdefault.jpg)
![How To Remove/Uninstall A GROHE Kitchen Faucet Or Mixer❗[Full Tutorial]](/img/tr.png)
Got frustrated after an hour of trying to figure out how to remove this 20 yr old faucet from beneath. Found your short and to-the-point video very quickly. Really generous of you to post this solution. Saved me (and just about everyone else here, I guess) so much time and money. You rock! Thank you!
Spent two hours under the sink before I thought to look this video up. Thank you.
Thanks for making this video. Spent five minutes underneath trying to unscrew the same type of faucet from underneath. Figured there was probably a TH-cam video out there showing the easy way to take it apart, and sure enough, yours was the one.
I'd give this guy 10 stars if I could. I, like others, spent too much time trying to remove the old Grohe faucet. This short video gave me the basic layout I need to remove the faucet. Thank you!!!
Thank you so much for this video. Had no idea how to remove the old faucet until I saw your demonstration. Much appreciated!!🎉
You're welcome!
I have this exact faucet that needed to be replaced. I'm used to having to remove them from underneath. I couldn't figure out how to get this one out. Then I found your video and it saved my life. I never would have figured this out on my own. Thank you so much! Great video!
Thanks for this video! The base u shaped nut had me baffled! Saved me $450 on removal and replacement!
Send me the money😉. Kidding. Glad I could help you.
Thank you so much for this video. I tried to remove our faucet from underneath for a while and realized the physics didn't work. Your video saved so much time and drastically reduced the cuss words echoing throughout our house.
You are my savior, I’ve spent over an hour trying to disconnect it, and viola I found you video. Thank you so much
Man, I wasted 45 minutes trying to figure this out. Came here and got the answer in 30 seconds. Thanks for the post!
Your welcome. Glad I could help.
Thank you! Awesome video. I would never have figured out the removal of my Grohe faucet on my own.
You sir, are a life saver. Or at least a stomach saver. I have positional vertigo and you saved me a day of sickness by not having to unnecessarily having to crawl under the sink. Thank you!
Great comment. Glad I helped you.
Wow, your video was a huge help. We could not get that sucker off until we saw your tip. Thank you!
It's a crazy design. It was years I had installed them before ever removing one. I'm glad I took the time to film it and help people.
Thank you so much for this video!! Homeowner jammed the bottom nut on and the clip broke.. it was impossible to get off without your video!! Thank you
You just saved me a lot of time and frustration. Thank you for giving me back most of my evening!
Tank you for sharing this - we spent a lot of time searching for solutions. But it only showed how to install not to uninstall.
Those are the best taps, very classy.
Thank you so much! You saved me from the risks of high blood pressure 😂
Awesome glad I was able to help.
God damn. Thanks so much for this. My brother in law and I spent so much time trying to figure out how to get this faucet off. All other bathroom and sick faucets have a nut that you simply unscrew so we were very confused about the Grohe design since there was not nut. Thanks a lot!
Does the arm at top simply pull off?
Thank You. So different from previous experience, prevented so much frustration.
Same as everyone. This was super helpful!
Glad it was helpful!
Brad you crazy bastard you just saved me so much trouble!! Thank you!
I think you are about to save my life here- thank you 🎉 But I am stuck … my spout doesn’t slide off with ease like yours did, and I don’t have enough room to turn it very far. Help!
How did you take the top part off before the video?
So I have a similar Grohe,the whole faucet is loose at the base,either something is broke or underneath, or it just came loose like your doing,just tightening from the top may work.. correct????.thanks
That's what I would try. You can probably just pull up on the spout then tighten it with a crescent wrench.
thanks for the video, its coming out! paid $65010 yr ago nice faucet until the rubber trigger disintegrated, then the brush nickel finish started pealing on the spout, then the trigger completely failed, replacement cost for just the plastic plated sprayer was $219.00 now the BN finish is bubbling off the handle hub! super disipointing. i would rather replace 4 cheep faucets then get played like that again.
I have one of these at home also. Rubber peeling off the sprayer button like you said. And it's a replacement sprayer already.
These have been a favorite of mine, but some other brands have some pretty nice spray patterns that just might cause me to upgrade. More realistically I'll replace someone's faucet that has a good sprayer head and use it on mine.
Thanks for the perfect advice - worked like a charm!!
Great news. Glad it helped you
Our problem is getting the top part off, you so easily pull it off at the beginning, but the top of our Grohe kitchen faucet (the neck) is not just pulling off, no matter what my husband does. Yes, he already disconnected the sprayer hose. He called Grohe and they said to just pull up, but it's obviously hitting something inside, no matter how hard he pull up. He has put lubricant ...
Maybe you don't have this model. If it turns easily this one should pull right up.
Thank you, I’ve been trying to upload a photo of ours but can’t figure out how in the reply.
I don't know if you have solved this by now, if not: We had the same issue with our faucet neck not pulling off. The solution was brute force using a mallet to pound up on the faucet (in the center of the curve) while another person was holding the base down (to avoid stressing the underneath mounting. It took a several aggressive swings but the neck eventually was driven up and removed from the base.
Thanks, we have not figured it out. I guess we’re going to have to try this. My husband was thinking maybe saw it off.
Thank you for your video. Huge help in figuring out how to take the faucet out. Kudos.
Glad I could help
Thank you! You saved our day!
That what I do.
Thank you for this video, it really helped me out BIG TIME!
Different then any other faucet out there. Glad it helped you.
How do I remove the first few parts that you didn't have in your video? I'm stuck there
You disconnect the sprayer hose below then pull it out. Then the neck of the faucet just pulls off.
Super helpful!! Thx!!
Thank you! This saved my Friday haha
Thanks. Life saver!!!!
Can I replace the Grohe Lady Lux Kitchen Faucet Spray Head (46173IE0) with other brand's pull out spray heads?
The grohe heads connect differently then any other I've seen. I'd say it's highly unlikely you will find anything other than grohe to replace this.
The rubber prob wore out on the sprayer, huh.
@@B-RADRIDES i think you are right. thanks.
You just saved me!!
I was ready to destroy it in place to remove then I saw this brilliant piece!!
Glad I could help you.
Appreciate you
Thank you, you save me day
💯💯💯💯💯👍 Thank you
Arg.. spent 3 hours removing mine in pieces with a hack saw
Yeah. Really different from every other faucet out there.
Dumbest design ever for a faucet
What good is it if it doesn't come apart . This faucet sucks