you all probably dont care but does anyone know a tool to log back into an instagram account? I was dumb forgot the account password. I would appreciate any assistance you can offer me.
@Muhammad Emmitt thanks for your reply. I got to the site through google and im in the hacking process now. I see it takes a while so I will reply here later with my results.
I did gutters a long time ago, but I had forgot how to do mitres, make tabs, etc. So I watched this to see the one piece artistry. I think I'll stick to 2 piece for my first gutter in 30 years, lol. What I had forgot about, and you reminded me, is PAINT! I remember that we had found some paint that matched perfectly, and it really cleaned up the corners a lot. I liked the video a lot. Thanks for posting.
Say what? Score and snap and no seam. Karl is not a gutter man, He's a magician doing crazy magic stuff. You Rock Magic Man, thanks for sharing high skill fun.
sunnysacto thank you. But like I said before this was just proof of concept. I was told that it was impossible to do an outside Mitte in 1 piece. For speed, I would never do this for an entire house, but the jaws dropped back at the shop when I showed them out could be done. Thank you again for the accolades
I've pulled a few old gutters of lately in australia where they've done there outside mitres like you. Pretty cool method. I like just doing the cuts seperately especially with long lengths with an inside mitre on the other edge. Interesting thanks for sharing.
Yeah good point. He is using a good sealant but aluminum gray is the way to go. Also he should just use strip miters because that miter looked like trash.
Guys, this is actually just proof of concept. I was told that it was impossible to make an outside miter in one piece like an inside miter. Thanks for the view and comment
@@kzeuz999 Inside miter would make more sense in one piece. Outside is kinda pointless. There's just not much keeping it connected but still cool you did it.
You got working man hands like mine and when someone tells you, you can't do it... You do it aaand make a video to prove it. Nicely done!. I have done the exact same thing with some gutter , cornice, coping,thru wall,base flashings and some other flashings too just to prove it could be done. Keep the good work up man
I don't know man. I like you cause your hands look like they gone thru a wood chipper a few times and that's pure greatness in my mind. Otherwise I just don't know about this corner work : (. Please do another version where there's now paint and or outside screws available and ping me when its done.
I do seamless gutter all the time and it much easier and faster just to make it out of 2 peices and looks better also the screws you put in the frount will just rust and leak
Denver Broncos I agree. This demonstration all came out of someone saying that it was impossible. This was proof that it's not. I agree it may not be practical in a high volume setting.
Joey Rice true it is but just like you, I’ve had plenty of customers request this and I usually use strip miters but when I do this it usually takes about the same time for me to make two pieces and put the strip miter in it only took this long in the video because he was giving an example how to do it when your at work and in the grove you can cut this just as fast
It's cool, but the box miter is quicker, pre caulk the miter zip it on caulk seams and dab the screws wherever you choose to put them. Way quicker. But this would helpful for this pesky baby miters that strip miter sometimes dont cover good
Your red and green snips are too dull that's why the edges are rolling and look jagged. Other than that this is a great method to cut miters I never did them in one piece but I like the way they look. I'm just so used to cutting them in two pieces I'm fast like that but if I could learn how to do it this way and get fast I would rather do it cuz yours look a lot better in one piece. And it's easier to seal the miter with silicone while it's on the ground instead of doing it from a ladder especially on a two-story house
a roofing co did my neighbors gutters did it so clean I can't figure out how they did it. no visible seam and no screws. wish I could upload a picture. it's got me baffled.
If and when I install lead lock screen, I use a similar technique for when I cut the miters, other than that, wouldn’t use a solid section to do gutters going around a miter! Great demo though bossman!!
Then your customer is a blind person, I honestly cant believe you pass that mess off as quality finish work! There's nothing wrong with pre-made corners, installed correctly they last forever
I don’t know who all you guys are giving this guy credit he just took an hour to make a miter. I live in New Jersey America over here. We got jobs to do money to make Buy box outside strips and be done with it dude
I do a 2 piece mitre currently but would love to learn this method! Any chance you'd share your pattern with us? Also, can you do inside mitres with this method? Thanks for this wizardry! I'm blown away and greatly Impressed!!!
looks pretty good but takes way too long in my opinion if you had a house with more than 10 miters youd be there all day. I appreciate the craftsmanship but theres many faster and easier ways
Good craftsmanship brotha! One question tho, on OG gutter you always have to hit the design to make it look somewhat the same then touch it up with paint or is there a way to make it look perfectly the same piece of gutter like you can do with flat face fascia gutter..
If you’re a gutter guy I’m going to assume you’re smarter than your comment. This is proof of concept. I was told that it was impossible to do plus we are in the south where we don’t use strip miters
i admire your strategy, though it's totally unnecessary. i've done over 5000 houses in my career and it's much easier and faster to make it out of 2 pieces. also, what are those screws you use? looks like an eye sore. you make two pieces and leave a little extra to seam around the corner, not "use a little paint around here".
Man, when you don’t wanna have to worry about getting paid Friday and make some good money, come over to DRG. We don’t drink on the job tho, that’s a no go.
Karl can you explain how you go about your template for outside miter?I have several 22.5 outside and inside angles I need to cut and not sure what’s best..your template goes into a point on the backside...thanks..
scott hendrix The best way i make a pattern is with a compound miter saw but i believe i made this particular pattern using a speed square and measuring tape.
Reds cut in the right direction and green cuts in the left direction. Granted you are tilting the snips in the proper manner. Also, yellow snips cut in both directions and straight.
Absolutely! But this is a proof of concept video. I was told it was impossible to make an outside mitre in one piece. I wouldn't suggest doing an entire house like this.
Wasn't meaning to disrespect ya.... But I've been hanging gutter for about 25 years and if we cut every miter that way it would take forever to get a house done... Lol
Ive spent a day and a half trying to do this....no 90 degrees no 45 degrees the roof has stupid angles and you go too fast! Plus your camera guy needs to go.
Awesome craftsmanship
Just the fact you're taking time out of your day to show others is A CLASS..... cheers from the City of Angels!!
you all probably dont care but does anyone know a tool to log back into an instagram account?
I was dumb forgot the account password. I would appreciate any assistance you can offer me.
@Gerald Vincent instablaster :)
@Muhammad Emmitt thanks for your reply. I got to the site through google and im in the hacking process now.
I see it takes a while so I will reply here later with my results.
@Muhammad Emmitt It did the trick and I now got access to my account again. I am so happy:D
Thank you so much you saved my ass!
@Gerald Vincent Glad I could help xD
I did gutters a long time ago, but I had forgot how to do mitres, make tabs, etc. So I watched this to see the one piece artistry.
I think I'll stick to 2 piece for my first gutter in 30 years, lol. What I had forgot about, and you reminded me, is PAINT! I remember that we had found some paint that matched perfectly, and it really cleaned up the corners a lot.
I liked the video a lot. Thanks for posting.
Craftsmanship is undefeated. Great work man! I came looking for some info about lineset covers and left with a new respect for good gutters
Cedrick Gousse thanks man!!!
Great job! You da man.
Say what? Score and snap and no seam. Karl is not a gutter man, He's a magician doing crazy magic stuff. You Rock Magic Man, thanks for sharing high skill fun.
sunnysacto thank you. But like I said before this was just proof of concept. I was told that it was impossible to do an outside Mitte in 1 piece. For speed, I would never do this for an entire house, but the jaws dropped back at the shop when I showed them out could be done. Thank you again for the accolades
sunnysacto lol
I've pulled a few old gutters of lately in australia where they've done there outside mitres like you. Pretty cool method. I like just doing the cuts seperately especially with long lengths with an inside mitre on the other edge. Interesting thanks for sharing.
Good my friend
Thank for sharing!! Looks great!!
Well done, sir. My hats off to you!
Nice work! Thanks for sharing.
Never use clear silicon on gutters. Let’s light through. And the screws make this look messy. I would reject this mitre
Yeah good point. He is using a good sealant but aluminum gray is the way to go. Also he should just use strip miters because that miter looked like trash.
Guys, this is actually just proof of concept. I was told that it was impossible to make an outside miter in one piece like an inside miter. Thanks for the view and comment
@@kzeuz999 Inside miter would make more sense in one piece. Outside is kinda pointless. There's just not much keeping it connected but still cool you did it.
Great video, nowadays you can buy inside or outside mitres (45*), but the real challenge is any other angle
You got working man hands like mine and when someone tells you, you can't do it... You do it aaand make a video to prove it. Nicely done!.
I have done the exact same thing with some gutter , cornice, coping,thru wall,base flashings and some other flashings too just to prove it could be done. Keep the good work up man
Best tutorial I have seen good job
Thank you sir for sharing your craftsmanship.
I don't know man. I like you cause your hands look like they gone thru a wood chipper a few times and that's pure greatness in my mind. Otherwise I just don't know about this corner work : (. Please do another version where there's now paint and or outside screws available and ping me when its done.
Sym Cardnel lol ok. But again, this was a proof of concept demonstration.
I do seamless gutter all the time and it much easier and faster just to make it out of 2 peices and looks better also the screws you put in the frount will just rust and leak
Denver Broncos I agree. This demonstration all came out of someone saying that it was impossible. This was proof that it's not. I agree it may not be practical in a high volume setting.
i've done over 5000 houses and this is a total waste of time
@@kzeuz999 It seems a bit more work, but fun to see inside mind of magic man creating outside the box
Joey Rice true it is but just like you, I’ve had plenty of customers request this and I usually use strip miters but when I do this it usually takes about the same time for me to make two pieces and put the strip miter in it only took this long in the video because he was giving an example how to do it when your at work and in the grove you can cut this just as fast
Got to impress the boss tomorrow, this is my extra credit tonight! Looks great.
Tbone Murray did you impress him?
you lost your job. thats what you get for trying to impress the man
Yes sir, he was very happy
My respect amigo you show a perfectly cut thx
It's cool, but the box miter is quicker, pre caulk the miter zip it on caulk seams and dab the screws wherever you choose to put them. Way quicker. But this would helpful for this pesky baby miters that strip miter sometimes dont cover good
Thank you for your great skill
It would have been nice if you explained how the measurements go for your pattern. And how you were putting your pattern down to your measurement
Your red and green snips are too dull that's why the edges are rolling and look jagged. Other than that this is a great method to cut miters I never did them in one piece but I like the way they look. I'm just so used to cutting them in two pieces I'm fast like that but if I could learn how to do it this way and get fast I would rather do it cuz yours look a lot better in one piece. And it's easier to seal the miter with silicone while it's on the ground instead of doing it from a ladder especially on a two-story house
Those snips have been retired 😂
a roofing co did my neighbors gutters did it so clean I can't figure out how they did it. no visible seam and no screws. wish I could upload a picture. it's got me baffled.
Awesome! I would love to learn from you how to do regular inside and outside hand cut miters!
Do you have a12 inch compound miter saw?
This quality of gutter work deserves Pop rivets and gutter seal.
If and when I install lead lock screen, I use a similar technique for when I cut the miters, other than that, wouldn’t use a solid section to do gutters going around a miter! Great demo though bossman!!
10BASS BROS23 it was a proof of concept
This is absolutely beautiful
Omg I cant believe how terrible this is! I could never do that to a customer or anyone what a hack!! Pre made corners all the way they last forever
matt althorpe lol premade corners are for hacks. 3 seams for supposed seamless gutters, no thanks. Customer loved the finish work by the way.
Then your customer is a blind person, I honestly cant believe you pass that mess off as quality finish work! There's nothing wrong with pre-made corners, installed correctly they last forever
matt althorpe show your work then come back and run your mouth
Send me your email Karl
I agree, that miter job was terrible. I prefer to just hand cut all my miters, I would never do this to a customer.
Screws make it look bad bro you got to use pop rivets to make it look pro
The company I worked for emphasized speed over quality. We would have never been permitted to use rivets
You da man!! Can do it in his sleep!
That right respect, work physically
Little bit more time and effort but the looks are worth it
I don’t know who all you guys are giving this guy credit he just took an hour to make a miter. I live in New Jersey America over here. We got jobs to do money to make Buy box outside strips and be done with it dude
THE JIG IS THE ANSWER I NEED
nice
I do a 2 piece mitre currently but would love to learn this method!
Any chance you'd share your pattern with us?
Also, can you do inside mitres with this method?
Thanks for this wizardry! I'm blown away and greatly Impressed!!!
Whoa!
Very impressive I know the ex corner units are disproportionately expensive. That system is just as tidy as the shop bought option.
looks pretty good but takes way too long in my opinion if you had a house with more than 10 miters youd be there all day. I appreciate the craftsmanship but theres many faster and easier ways
Good craftsmanship brotha! One question tho, on OG gutter you always have to hit the design to make it look somewhat the same then touch it up with paint or is there a way to make it look perfectly the same piece of gutter like you can do with flat face fascia gutter..
You may as well use a strip mitre because your corner is sloppy and you have 3 screws on the seam of the corner
If you’re a gutter guy I’m going to assume you’re smarter than your comment. This is proof of concept. I was told that it was impossible to do plus we are in the south where we don’t use strip miters
Nah screw-in the whole mitre all the way up is crazy look a lot cleaner without
i admire your strategy, though it's totally unnecessary. i've done over 5000 houses in my career and it's much easier and faster to make it out of 2 pieces. also, what are those screws you use? looks like an eye sore. you make two pieces and leave a little extra to seam around the corner, not "use a little paint around here".
Joey Rice this is not how we normally do miters. This was proof of concept.
The screwless mitres do look nice. But I’ve seen them bust open when water freezes in them. At least one screw or rivet in the face is a good idea.
👌 that would make more sense i have done that with inside miters to prove a point also
What kind of 3/8 crew you using. One is the a hexagon bit?
i like using a black marker on black surfaces too. represent.
Great job but just to keep 3/4 of a inch attached is a lot of extra work for little if any benefits
Take a another beer bro!@!
Way too time consuming. Either use a strip miter or tab it with two separate pieces. Also having to use paint is no bueno.
Jamison Miller the guy is a jack leg
I am looking to repair the gutter around the bay window. Can this apply
Possibly, do you have pictures
@@kzeuz999 Yes sir
@@RealGunzUSMC I can help you
Man, when you don’t wanna have to worry about getting paid Friday and make some good money, come over to DRG. We don’t drink on the job tho, that’s a no go.
What is DRG?
lots of skill here but its so painfully slow for something i cant charge extra for.
Box mitres!!!with w5yr sealant..and charge 3' for..now thats how its done
Is not too bad better than boxes.took too long .why not to use the squaare just 28°degrees is faster i what i do.
Primo work Karl! Many thanks for the demo.
Mark Hanson Thanks for watching.
Minnesota boy ready to fix a gutter in Australia-was great to hear your voice and learn from an expert! ATB!
Mark Hanson I'll help any way I can just hit me up. I'm in sales now but I still install periodically.
You must be blind to call this shit Primo work!
I had a laugh at 9:57 "kill it with the sealant"
Well done overall! Thank you
Frontline Roofing Company thank you
A little more sealant next time my brother
Jay S I’m up to 2 tubes per miter and one tube per endcap 😂😂😂
Cmon now, looks like Garbage, that is not how you do an outside corner
kaleb E this is a proof of concept. I don't do all my Miters like this.
Really hard to get the gutter up under the drip edge with them kind of hangers
I agree
That’s why you can always unhook the hangers
And of course pull them up when you already have your gutter under drip edge
Karl can you explain how you go about your template for outside miter?I have several 22.5 outside and inside angles I need to cut and not sure what’s best..your template goes into a point on the backside...thanks..
scott hendrix The best way i make a pattern is with a compound miter saw but i believe i made this particular pattern using a speed square and measuring tape.
My first comment wasn't very helpful. I'll do a video on doing a pattern. Thanks for watching.
@@kzeuz999 Hey Karl, any chance you could update on making that pattern?
I was on board until he pulled out the zip screws.
Tristan Carver
Prefer rivets. They look better but its slower.
@@Mote78 just need an electric Milwaukee rivet gun.
What the difference between the green and reds?
Reds cut in the right direction and green cuts in the left direction. Granted you are tilting the snips in the proper manner. Also, yellow snips cut in both directions and straight.
Does anyone can send me the pattern of outside and inside corners?
My boss will
Send me home 🏡 but I respect everyone’s
Idea for work 💯
Wouldn't it be a whole lot easier just to use strip miters?
Absolutely! But this is a proof of concept video. I was told it was impossible to make an outside mitre in one piece. I wouldn't suggest doing an entire house like this.
Wasn't meaning to disrespect ya....
But I've been hanging gutter for about 25 years and if we cut every miter that way it would take forever to get a house done... Lol
Its all fun and games until you put a miter screw through your finger
cody stewart I've done that!
Thank you for this post. I need to make a template, any suggestions?
C McCoy a compound miter saw
There’s video’s by Mark Cavelli On how to make patterns
Mr. J. knows how to do this work. However he does an extremely poor job of showing how to do this.
🤠👍👍👍👍👍👍👍👍👍👍👍🍺
Really well explained on the corners
Wow i 2nd that takes way too long and as little as i pay for a miter this is a giant waste of time but ive done it when ive ran out of miters
It does help , for other projects too
I’m stuck on making the outside and inside 22.5 meters.I have a mitresaw if it’s easier that way..I get mixed up on which side to leave the tabs on?
You can leave the tabs on either side. Just do one side with tabs and one side slick.
I put the side without tabs towards where you can see 😉
The side with tabs should be the piece you’re gonna hang first. First piece should be top of the slope
👍🇫🇮🇫🇮👷♂️
ND MAKE THE BOTTON IN 45 DEGR
Beer on u hand really professional
Hector Mayen yea we have fun
thanks for the video, but can you redo this with a different color metal? nobody can see what you are drawing
I’ll stick to strip miters
thats fine and dandy lets see ya do one thats 40 feet on both sides of 90 bend , ya aint throwing it around like that
Are y’all located in Georgia?
Yep
Looks trrrible with screws. Use rivets
Make more sense to get already made corners. Looks like shit. Could have hung 10 corners why he still works on 1 haha
hookem proof of concept. And if you're using miter boxes then you're spending too much money and adding unnecessary seams
Ive spent a day and a half trying to do this....no 90 degrees no 45 degrees the roof has stupid angles and you go too fast! Plus your camera guy needs to go.
Craig. Stewart it wasn't planned. But id be glad to help you.
hes too busy drinking his beer
He’s drunk gets paid 10 bucks an hour and shoots dope every half hour in the back seat of the truck.... you get what you pay for
Never spot paint especially with Senox paint
R right 😂😂😂
Do you shave your hands? They look smooth
tree fiddy 😂😂😂😂💪
Verdaderamente son de terror🤢
Im not sure why but i want to hire you as long as you promised not to do a one piece miter ever again.
😂😭
I can't make that promise
How to make the template ?
I'll have to make a video
I new a guy as a kid that didn't have to use caulk on them he was anal bout that
Way to slow that’s why I use box miters way way way quicker
Mark Schaefer again... this is proof of concept. I was told that it was impossible to do
Needs some offsets
anyone from the jersey area?
Perfection imgur.com/gallery/ALUFLKi
Looks like your just trying to get nothing done..
Next time could you use more caulk? .......that wasn’t enough!
sillypuddy stl lol sure!!!!
Great vid brother. I just got n2 the business. Enjoyed watching it
sillypuddy stl thanks. I'll do more in the future.
sillypuddy stl let's talk! Are you on IG?
Put down the beers and take a class instead. Looks terrible.
It won't let me put pics on here
Worst mitre ever..lol
WV Voice $125k a year says you’re wrong.
karl jackson lol.
I will go out of business if I do a job like this
So what. Who cares.
Im a roofing installer and i think its not a good job..i score u 5/10