EASY Cabinet Doors and Drawers | Shaker | DIY | HOW TO MAKE | Circular Saw | Tutorial
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- **SUBSCRIBE** www.youtube.com...
Easy and cheap shaker cabinet doors with a circular saw DIY
This video was inspired by people who want to make cabinet doors without a table saw.
Let me show you how to build the best cheapest shaker style cabinet doors and drawers I can come up with on a budget using a circular saw.
To be clear, this is not the BEST way to make cabinet doors... This is the BEST BUDGET way to make shaker cabinet doors I have been able to find.
With that being said, I put these through an exaggerated level of abuse to test out their integrity.
They are made with 1/2" MDF used for the frame and 1/8" MDF panel. These shaker style doors look nice and are so easy to build, even a beginner can do it.
Using these budget materials, you can price each door out to be around $10 a piece. Depending on the number of doors you have to make, you can complete a kitchen remodel or bathroom remodel for less than $300.
SEXY WOODWORKING SHIRTS: woodworkingshi...
!!!!*****BUY ME A BEER*****!!!!
Did I do a good job? Buy me a drink man! I deserve it! I'm toasting to my supporters at the end of videos and would be stoked to say a toast to you!
Here are a few methods how:
Venmo: Tyler-S-22189
Cash App: cash.app/$wood...
Or buy me beers monthly by becoming a Patreon: / woodnerds
Cheers everyone!
Tools Featured:
Kreg Rip Cut Guide:
amzn.to/3U7F9NK
Kreg Door/Drawer Pull Jig:
amzn.to/47GRaOW
Kreg Hinge Install Jig:
amzn.to/3qsXQzq
Kreg Pocket Hole Jig:
amzn.to/4cM1Tds
DeWalt Circular Saw (A bit smaller than the one used in the video = easier to handle and better for this application):
amzn.to/3U3qbrR
DeWalt DCF850 (Impact Driver):
amzn.to/44e8YxS
Soft Close Cabinet Hinges:
amzn.to/3KLhmhk
Door/Drawer Pulls:
amzn.to/3sOIHsH
Paintable Caulk:
www.amazon.com...
Respirator:
amzn.to/463z2NQ
Camera Gear:
Sony A7Riii: amzn.to/2Sk4Qdv
A7iii (Cheaper but awesome alternative): amzn.to/2Slj4dZ
GoPro Hero 5 Black (Lowest Price): amzn.to/2RyotQ0
Tripod: amzn.to/2zB3mF4
Lights: amzn.to/2y24Ack
Lapel Mic: amzn.to/2BSznGe
Microphone with deadcat: amzn.to/2VnyLBj
_____________________________________________________
Disclaimer:
I am a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for me to earn fees by linking to Amazon.com and affiliated sites.
Sound Stripe copyright code(s):
MKNO9K1SG9RHBQAQ
JGGIV0IMI6RKPGNR
I was thinking about buying a Slam Simulator 2000, but after this review I think I’m just going wait for the 3000. Once they figure out how to make it stronger.
That’s true! The 2000 has a feature I didn’t have time to showcase called “where’s the toaster?”. This feature had my wife testing the durability of the cabinet doors inside the house as well. Pretty neat!
I think the 3000 is semi-fully automatic.
🤣🤣
I dunno. They just don’t make Slam Simulators like they used to. Probably made overseas.
It’s a shame, really!
I don't have the space, money, or desire to purchase a table saw and it's really tough to find videos that don't require one, or a gazillion dollars of high end equipment. So from the bottom of my fledgeling woodworker heart, THANK YOU 🙏
Of course!! I’m glad this video was helpful! Thank you for watching and taking time to comment!
Same here! This is an awesome vid!
Thank you! I really appreciate it!
Man, for someone living on a rental and wanting to give an upgrade to the old cabinets, this is perfect.
I’m glad it was helpful! Thank you for watching and for leaving a comment! I appreciate it! Cheers!
If MDF is tough enough to take the abuse of being made into a car subwoofer box, suffer the hot/cold cycles of a being in a car trunk, slamming junk into it while making tight turns, not rattle apart from the bass, and still look decent after all that time... it can be a cabinet door haha. Thanks for proving it! Certain materials get a bad rap, but this goes to prove that the reputation is not always deserved.
Great points! I appreciate you man! Thanks for watching!
Unless you plan on putting those cabinets in the kitchen near the sink, liquids or moisture from steam/hot water…….. oh wait
@JameyKing. Sure, if you don't protect it with paint, or caulk, or something else... oh, wait.
Chill out man, the point is still valid haha
If it’s sealed with a top layer, then moisture cannot reach the material.
@@WoodNerds I agree mostly but the moment you get a crack in the paint you never believed would happen because you "made this right" and it starts slowly warping and disintegrating..... Ask me how I know.
I primed my MDF until they looked like white wood. I used Benjamin Moore Bath and Spa paint. I had a very very solid coating. It looked factory made. Got a tiny split where the panel met the style and ignored it. It was about 5ft from my guest bath shower that never gets used so I figured no problem. The door quickly became wet paper after a few months of random multi night guests showering. I know it's a non issue if this doesn't happen to you with the split but this wouldn't have been an issue at all with Plywood. Maybe it's where I am in California but plywood is about $25 more for 4x8 Baltic birch 3/4 ply than the MDF equivalent. I guess I just don't think it's worth cheaping out on if you're already investing the effort to build it. But like I said I agree MDF gets a bad wrap. I've built closets with it and it's fantastic.
THANK YOU! What a great tutorial! Everyone says stay away from mdf, it's not for water place etc... This makes me feel so much better.
Of course! Thanks for watching! If probably cared for, it will last! Just make sure if it sustains damage and the raw mdf is exposed, that you touch up the paint. Water is the main enemy of mdf and the paint acts as a barrier to protect it. Other than that, should be a solid door. I’ve had some I made in my high use/high moisture bathroom for almost two years and they are still perfect.
GREAT video for folks that don't own a router or table saw!
Thanks for watching! I remember the struggle! Trying to think of those without all the goodies.
The toaster was the icing on the cake.
My wife wasn’t thrilled but it had to be done.
LOL. 🤣 The Slaminator did not meet the expectations. Good shaker style construction. 👍
Hahaha thanks for watching!
You are such a great teacher! I am just watching videos to learn to build things and have been purchasing some tools, but I don't have the space for a table saw and this really helped me to start my first project which will be a drawer. ❤ Thank You!
I’m glad the video was helpful! Congratulations on starting with your new hobby! I hope your projects turn out well!
Very well explained! Thanks
You’re welcome! Thanks for watching!
Thanks man. Im buying my first house but can only afford smaller older homes. I can drywall, fix siding, and general construction stuff all day, but millwork is a much finer end product. Most places I can afford have old cabinets, many broken/missing doors and this is giving me confidence in being able to fix/replace.
You can do this no problem! If I can do it, anyone can (I mean that). Cabinets seem much more daunting than they really are once you get into them.
Perfect
Now all I need to know is how to make the cabinets.
I’m working on plans for this as we speak!
Great video. And for anyone who is on a real budget and cannot afford a lot of tools, this is perfect. I have tool but cam appreciate making this way so that everyone can have something that look nicer. Also, these would be a great cabinet refresh for rental properties. If they get messed up by a bad tennant, its an easy and cheap replacement, while looking modern and stylish.
Great points! Thank you for the kind words!
Getting ready to down size houses. My expensive solid wood 38” cabinet doors are twisting and curved and they are only 3 years old! Next house, building my own! Thank You!
Dang! Sorry that happened. Of course! Glad the video helped! Mine are in great shape still.
Results are a total surprise. I have only used MDF as sacrificial layer to protect "good wood" or as the inner panel on a painted door.
I build things with mdf all the time. My whole miter station is entirely mdf.It's very underrated. It's strong, flat, and stable. The only down side is It's dusty.
I’ve been using it for about lot of projects for those reasons exactly! Dude! Dusty is an understatement haha. Routing it is the worst!!
I like your content and style.
Thank you for the compliment! I appreciate you taking time to say something!
Another awesome video brother. Keep up the good work. I can’t wait for the next one.!!!
I appreciate you man! Thank you!
Nicely done! I used this same technique to make a plywood 4’x8’ door and it turned out great.
I’ve been wanting to do the same to satisfy my wife’s need for a sliding barn door! Thanks for watching!
I like how the name of the paint matches you!
DWL . Love this video. Your slam simulator is the icing on the cake😆
Fantastic tutorial! Now I just got figure out how to make the actual cabinets..
Thanks man! I’m working on some plans for cabinets as we speak haha.
@@WoodNerds oh wow,I didn’t think you would actually make one, now I’m def subscribing to get the video when it’s out!
Haha I appreciate that!
I was able to accomplish a similar look and design by using 1/2” MDF panels and 1/4” strips glued to the front to simulate rails and styles. Glued and nailed down, gaps filled with spackling and sanded smooth. You can’t even tell they’re MDF once they’re painted.
I’ll have to try that out too! Thanks for watching and sharing your experience!
The explanations along the way were so helpful. A couple of questions: 1. Was the primer water-based? I've heard that could raise the MDF fibers but maybe just sanding would take care of that. 2. The edges didn't need to be filled to conceal the two pieces of MDF coming together? It maybe was addressed when you talked about using MDF for both. Nothing wrong with MDF doors! And the tool cost is so minimal. I don't understand the people who complained about that. The fence is reasonably priced, a cheaper pocket hole jig could be used, and one wouldn't really need a jig for the handles. I actually think I could do this!
I think it is water based. I didn’t experience any raised fibers when I used it. In my experience, MDF can be exposed to a little water here and there without it blowing up. It’s sitting in water and lots of exposure over time that really hurts it. Plus, once you have a light coat on the MDF, every coat afterwards isn’t touching the MDF, it’s only building on previous layers of paint so you should be fine with that.
I didn’t have to do anything special outside of what I showed in the video. I try to showcase every step so you know what to expect and can plan accordingly. Making sure your cuts are square and accurate will ensure you don’t have a lot of messy cleanup to worry about when it comes to gaps and such.
It was much easier than I thought. Safety is most important here. Just be aware of where those blade are, and where they are going to be and keep your hands out of that path.
@@WoodNerds thanks so much for the reply!
Happy to help :)
That door is too pretty for the slam simulator!!!
Haha! Still looks good! I’ll save it in case I need to replace one of my other doors I guess!
Excellent video! I'll be making my mock shakers with 1/2" panel and 1/4" trims to give it weight and less depth from edges to panel but really appreciate the circular saw method! I've built a work table with DIY drop-down saw guide but that Kreg jig is brilliant. Subbed.
I’ll have to try that method out! Thanks for watching and following along!
@@WoodNerds I'm now thinking your method with 1/2" edges might allow for a decorative bead inside it so thanks for the inspiration!
@NealosMetropolos of course! Would also be cheaper by about 50% as the more expensive plywood makes up just the border rather than the full panel.
@@WoodNerds I'm a scientist (physics) and fully approve your Slam Simulator 2000 testing methodology and results! 🖖
@NealosMetropolos hahaha thank you! It’s official!
thank you for this helpful advice and demonstration :) now I know MDF is OK.
another good test would be to slam the panel door in the other direction, a reverse slam. to see when and how the hinges might fail.
Dude! Great idea. Might have to order a slam simulator 3k for that test!
Awesome 👍🏼 video! Like the music and style a lot
Thank you! I appreciate that! Thanks for watching!
Thank you for the very through tutorial 👍
Of course! Hope it was helpful!
Dude you made this look so doable I can't wait to give it a try. My last quote for Cabinet Door Shaker Style $98 per door. I have 40 doors in my Kitchen so $3,920. What do I have to lose. Thank you for the video and your time.
It’s really not hard. Try a couple to get the process down and make sure they turn out how you want, then batch the process and make the rest. Making sure to test fit and dry assemble along the way. Good luck!
Thanks for the video, everything is great and beautiful. But when I drilled the holes for the handles from the back side, it didn’t turn out nicely, so that this wouldn’t happen, put an unnecessary piece of MDF under the drilling site, and then drilling into it wouldn’t happen. The doors turned out wonderful!
Dude! Glad to hear they turned out nicely! Thanks for sharing your results!
I am happy to view. Thank you.
Thanks for watching!
Excellent job as usual. Happy that you keep the content easy to follow. Subbed for the videos, rang the bell for the awesome t-shirts lol!
Thank you! Haha I was just replying to another comment about needing to work on more designs! I seriously appreciate the support! Cheers!
That was a thoughtful and methodical tutorial, kudos.
Thank you, Mark! I appreciate you taking time to respond!
I'm glad youtube brought you through my algorithm! I like how this worked up and I might have to use these doors on a wall cabinet set i want to build in the living room
Thanks for watching! If you do make them, I’d love to hear how they turned out!
LOVE YOUR CONTENT BRO!
I really appreciate that! Thanks for watching and taking time to leave a comment! Cheers man!
amazing video!! In Canada where I live, a sheet of MDF is actually same price, if not slightly more than a full sheet of plywood of the same thickenss. Its crazy this used to be considered a "cheap" alternative. Not for me :(
I’m sorry to hear that! Things are wound so tight these days. I have hope we’re close to a point where it starts to swing back. I appreciate you watching and taking time to leave a comment!
Awesome!
Thanks for taking the time to watch and leave a comment!
Would it be worth making my own cabinets as well as drawers and doors?@WoodNerds
@MAE74961 I think it’s a great way to gain some skill. So in that way it’s totally worth it, however, you can buy cabinet carcasses for pretty cheap these days. If you’re just trying to get it done and save time and effort, buying and assembling is probably the way to go.
@@WoodNerds okay thanks for the advice!
@MAE74961 happy to help! Good luck with your project!
Great video. To be honest I’ve always shied away from MDF but I’ll be giving it a go now thanks to you! New sub, blame Mitt. But so glad for the suggestion. And as the master himself says, keep up the good work. Wow that top setting on Slam Simulator, otherwise known as “little brother ate the last pop-tart” was impressive!
“Mitt” is ruining TH-cam for me! Haha thanks for watching and leaving a comment man! Bagel mode was too much for the simulator to handle.
Here in Brazil we use MDF a Lot, for everything. There is waterproof MDF for wet areas
Thanks for sharing your insight Ronie! Much appreciated!
Awesome video! Well done, sir.
Thank you, Scott! I appreciate you taking the time to comment! It helps! Cheers man!
Many, Many Thanks for posting this DIY for cabinet doors without a table saw or router and the little details & tips throughout are extremely helpful. Will this method work just a well with 1/4" & 1/2" plywood? I only ask because that is what I purchased for this project, before finding out it was going to require more tools/skills than I have...LOL!
Plywood can be used but you’ll want to use edge banding or some type of filler on the edges to get a clean result. In my experience the ply’s in plywood are too visible and often times contain voids that show through when painted without treating the edges first.
Awesome video!
Thank you! I appreciate it! Cheers!
Thanks for the great video. The screws are causing a bulge in the MDF. Any tips for that?
A bulge on the opposite side or the side of the hardware? Could try a bigger pilot hole. If it’s on the opposite side of the hardware, might need shorter screws!
Abso f*#%’n lutly going to try this build method out!! I love the video for a number of reasons!! 😜😂😂
Hey Misty! Thanks for watching and taking time to leave a comment! If you do, id love to know how your cabinet doors turn out!
Very enlightening. Tyvm 👌👌👍👍😊😊
I appreciate it! YWVM!
Awesome video. Thanks for sharing. Sending you some beer money 😀
Lesleigh! Thank you so much! I really appreciate it! Cheers! 🍻
I really liked this video until I found out it was just a clever way to promote the Slam Simulator 2000™️.
I mean, I get that it’s convenient having bluetooth and battery now. The 1000 was borderline a waste of money. Unless you used the 20% off coupon, but Harbor Freight decided to abandon their roots and now they don’t do coupons. So I’d need to spend the full amount. Unless I use the code NERD at checkout, but then this dude is going to get a 10% affiliate kick back and I don’t like being a part of the system. Makes me feel dirty. Such a shill. Unsubscribe. Off to watch a 10 tools I don’t regret buying sooner video because I need a 4th pica dry pencil. And maybe one of those TSO reamer tools.
Amen! Who can afford the slam simulator line anyway! Serfs could do the same thing with a grain of sand and a blade of grass. Plus smack simulator by jadooby tools does the same thing for a quarter of the price, I’m team purple all the way! Great callout! Been looking for a new version of the same thing I already have! Off to watch a “this changes everything” video to see a guy screwing a spoon to a ladder!
Get a room you two.
Trying to find a room with a spoon and ladder.
Thanks for the video! Glad to have found a video not requiring a table saw.... new to wood projects so I was wondering why you used pocket screws instead of a nail gun? Is it a matefial difference in quality/sturdyness? I am trying to do MDF to an existing flat panel wood door
I think the screws will help hold the rails and stiles together in a way that you’d get if you used joinery (dado and tenon joinery in this case). Otherwise, if the panel flexes, you might end up with the rails and stiles separating. I haven’t actually tried this out so it’s an assumption but I’d rather the extra hold there in case the little bit of glue holding them together wants to give up the ghost.
As soon as I saw the Kreg rip cut, I was out. 😂 I've tried and I could *not* get a consistent width.
I guess it takes some practice or perhaps your circular saw blade isn’t in line with the baseplate? I had a Ryobi circular saw that was impossible to use with the rip cut guide because the saw was far out of alignment.
Love this video, have a question about paint though. Our kitchen cabinet frames have all been painted with oil based gloss white so of course we would want the doors to match. Will the MBF accept the oil based paint without swelling or would a primer need to be painted first to seal it? The paint will be spray painted.
Hey! I’ve tried both on MDF and haven’t had any issues. Any time I talk to a paint specialist, they say primer is a must regardless the material or top coat paint type.
These videos are fantastic! I can't afford the store prices and have never tried anything like this, so thanks for making this so easy. However, do you think MDF would work for a slab cabinet? I’m kind of a minimalist and I think slab cabinets just look clean.
Thank you! Yeah, I think mdf would work perfectly for that. Would be much easier if a project as well. You’ll likely have to get a thicker sheet though so you don’t cut through with when drilling the holes for the hinges!
@@WoodNerds Awesome! Thank you so much! We need an update STAT, so I’ll let you know how it goes! 😅😁
Thank you, you demonstrated this very well. Love the doors and can you tell me the color you painted it.
Thank you Lynn,
Of course! It’s “clary sage” satin finish, using a “cabinet and furniture paint” base to help mitigate wear and tear. my wife picked it up at Lowe’s. I think the color manufacturer is sherwin Williams!
Hello, great video thanks for sharing your awesome skills!
Question: Is 1/8" MDF the same thing as 1/8" hardboard?
Hi! Thanks for watching! The two seem to be very similar. If anyone sees this and knows better, please correct me, but I believe hardboard is just like mdf but a higher density.
FN well done!
Haha Thank you! I appreciate it!
Just a note. Yes, you made the cuts with a circular saw, but you also must have another $400 worth of Kreg Jig products to complete the task of making the doors. I like the design and think it makes a strong door due to the solid back panel. Just remember there will be a sizeable investment in additional tooling. Nice video.
Hey, it’s more like $250 (I paid for them) but I get your point. You can make a couple of the jigs yourself but the question is how much work do you want to do and what level of accuracy is acceptable to you. To make accurate jigs that cut square and straight also require tools and materials to ensure they are square and straight haha. There’s an unfortunate truth about basically anything in the creative space and that is; tools make the job easier and the outcome better. Can someone produce high quality and accurate work with basic tools? honestly, I can’t, but can someone else? Absolutely, but where the trade off is you need to have the skills to be able to make up the gaps that these tools fill. This setup (in my honest and empathetic opinion) is the cheapest and easiest to use for beginners that don’t have a lot of the tools a seasoned maker has. Some things you just can’t make without proper tools and/or an appropriate level of experience.
Well said my friend
Take some vice grips and put it on the side of your saw . Can make straight cut without a jig
That’s a great idea! Job site jig!
What depth did you set your pocket hole jig?
Thanks!
Dude! Thank you! I really appreciate it!
@@WoodNerds Dude you're so welcome!
I have seen countless videos thinking I would need a table saw, router table, trim router, planer, jointer, DIY crosscut table saw sled, furniture grade birch ply and woodgrain filler to make a competent cabinet door.
Your doors are great looking, clearly sturdy enough and way easier to build than the alternatives.
@ShaneTheGeek I’m stoked the video was helpful! I got some feedback on my last cabinet door video that a lot of people didn’t have table saws etc. and wanted an alternative way to make them. Took me a bit to figure it out but I’m glad I was able to come up with an easy solution!
Still not sure if I am measuring cabinets correctly. I need 9 doors. Do you sell the ones you make??
Great video! When you explained the benefit of mdf to mdf, it made me question what you could use for a trim piece for added design. I know you can use the router, but that doesn’t exactly apply to the lack of equipment that is the focus of this video. There’s lots of small trim options. Wonder if you could glue trim where the rails/styles meet the panel for added detail? Thoughts?
That’s a great point! There is a bunch of trim options that could spice the basic shaker design up with almost no added effort, and since the doors are the same size, you could easily batch them together. I’m partial to adding coves in my trim work and think they would dress this up. I’ll have to try that out. Great idea!
great build whats the name of that paint color?
Hey! Thank you! It’s “clary sage” by sherwin Williams! Satin sheen!
There is a product that will make paint smooth out, well worth the price🫢
I’ll have to check that out! I could use it in the AZ summer heat!
Poor Bob got slapped hard for no reason.😂
So sick of TH-camrs being given free tools, no way they'd give me the slam simulator 2000.
It’s a blessing and a curse. Now I have to email them and explain how my wife broke it.
@@WoodNerds 😂😂🤝🏻
😂😂
Checkout the castle pocket cutter. Way better than kreg and much stronger. You could definitely get two screws in with a castle.
It’s much easier and forgiving to align pieces due to their patented low angle pocket.
Thanks for the suggestion! I’ve seen them before. The models I’ve found are $1k+ machines. I was thinking of getting the kreg foreman($300+). Any experience with the foreman vs the castle?
@@WoodNerds I just upgraded from the kreg foreman to the foot operated castle machine. I built my cabinet company with the foreman.
I am thrilled with the castle because it’s so much stronger of a connection and it’s shocking how much easier and forgiving the alignment is. There isn’t much forgiveness with the kreg foreman, however with the castle you can back the screw out as many times as you need to re align the work pieces and it’ll suck tight every time.
I really like it for plywood to plywood connections, super strong.
@Theuniverseisstrange I appreciate the information! I plan on building out my garage in the near future. Probably 18 cabinets (10 floor, 8 upper). Having a quality machine would really improve the process. I’ll have to weigh that price tag.
Where can I find mdf for $10?? Great vido!!
Slam Sim (c) needs a "damnit" sound effect for realism
There’s a third party add on “damn simulator” for that.
Of course, I should have known.
@rp9674 😂😂
Would you even need to screw the original frame? If you have straight edges between rails and stiles, couldn’t you just glue to panel directly?
I bet you could! I think trying to glue that together and keep it all straight might ruin your day haha. I haven’t tried it that way yet but I can see it being a pain.
Hi, I’ve been wanting to redo my walking closet, the one that came with the house has no drawers, only a bar for hanging… Do you have a video for closets?
Hey! Thanks for commenting! I haven’t done a closet video yet, but I am remodeling our house so I’m sure it’ll come up in the future. I haven’t specifically looked for any videos that might be out there on the topic to recommend either. I believe the wood whisperer did one not too long ago for his wife that I’m sure has a lot of good info in it.
Bro you broke the slam simulator 2k with bluetooth 😂😂😂😂
Wrecked it! Wasn’t made to be cranked up to “bagel” I guess.
nice!
Thanks Craig!
Question: do you have visible seams where the 2 pieces of mdf meet?
Hey! Very slight indication that two pieces meet. If you watch my other cabinet door video, you can see similarly what it looks like in detail.
Loved this video! I am planning to redo all my cabinet doors and was hoping to make a “thinner” door and this will work great. Is the 1/8 inch panel ACTUALLY MDF , or is is tempered hardwood? For some reason I can’t find 1/8 mdf where I live.
Mine is mdf, might be listed as 3mm sheet. I have some hardboard as well and while I haven’t used it for the panel before, I don’t think it would cause any issues to use that instead. I say this without experience using that material for that purpose of course so take that with a grain of salt.
I was told at school that MDF is illegal in the states due to it being bad for your lungs.
I guess that was a lie to make me more serious about wearing RPE.
Haha, I think everyone knows it produces gnarly dust but you can buy it almost anywhere.
I have a table saw and router table but I think I like this over the table saw and router method... yes the table saw and router tongue and groove method is more "professional" but I dont have a million dollar house... I just want some cabinet doors that will survive about 5 years until I list the house for sale... let the next homeowner get all all fancy with tongue and groove cabinet doors.
That’s a fair perspective! In my tests beating these doors up I don’t see why they wouldn’t last as long as the tongue and groove. I couldn’t be more aggressive with them in the test aside from purposely destroying them by kicking the panel in haha.
I was wondering what blade you were using - does it matter ? Someone said the more teeth it has the smoother the cut
Hey! I’m just using the standard construction grade blade that comes with the saw but that is typically true. More teeth means smaller teeth though and that makes it harder to cut. As long as you’re steady, it won’t matter too much in my experience. You’ll have to sand the tool marks off the edges either way and with mdf that isn’t too hard of a task. If you plan to do this, maybe make a test cut with the saw and blade you have, to see if the results are acceptable to you. I find that the best when it comes to making decisions.
@@WoodNerds thanks for info !!
Of course! Happy to help!
Do u use mdf board to make the cabinet frame too or just to make the cabinet doors ? I was wondering to see if I should make the whole cabinets in my kitchen with mdf .
Im sure you could. I know they make cabinets out of particle board. In my opinion though, plywood is the industry standard and when it comes to structural integrity in a bigger box like that where force can be applied across multiple axis, I’d probably stick with plywood. I could be mistaken so take that opinion lightly!
If I used 3/4" MDF how thick should the center panel be? Or the same 1/8"?
The center panel should still be good at 1/8”. Using 3/4” for the frame on top of that will make a pretty thick door(7/8”). It’s all preference so maybe try a sample before fully committing. Shouldn’t cause any issues though.
Would MDF be better than pre cut pine planks?
It depends on your skill level, the quality of the pine, and the tools you have. In my opinion, mdf is great because it won’t warp, it comes flat and as straight as you can cut it. If the pine isn’t the right cut from the tree it has a high chance of warping. Also, it seems counterintuitive but mdf is actually harder to dent than pine since pine is super soft.
@@WoodNerds Thank you for your reply! I will see if I can get pre cut MDF and if not I’ll get the cutting guide jig and do it myself haha I only have hand tools and a small drop saw but it should do. I need to make 4 large cupboard doors which is nerve wracking
@nontrickpony wherever you get your lumber might be able to make the cuts for you for free or a small fee. If not, often there will be a local woodworker you can reach out to and pay them to make the cuts for you. When I first started I knew a guy who would make cuts for free, just because he was happy to see someone still interested in making things.
Do you think these would hold up in a kitchen? Or should I bite the bullet and use better wood? I hate my current cabinet doors
In my opinion and experience, if you simply pay attention to the paint on the doors and touch up any spots that might have sustained damage, exposing unprotected mdf then you shouldn’t have any issues. Water won’t penetrate waterproof paint and water is the main concern when using mdf as a material. I made cabinet doors for my bathroom (in another video I posted) and I’ve had them up for almost two years at this point and the bathroom is high use, high humidity, high temperature fluctuations with zero issues. If you’re unsure, maybe try them out first in your bathroom. This will give you an opportunity to try the building process, and abuse them on a smaller scale before committing to a whole kitchen.
@@WoodNerds good deal. Thank ya sir!
Of course! Good luck with your project! I’d love to hear how it goes if/when you end up making them.
@@WoodNerds I’ll be sure to let ya know!
MDF needs to be pre drilled to avoid splits
Thanks for the tip!
Will 1/4 inch mdf work? Having trouble finding 1/8 mdf
For this method I think 1/4 inch would be fine. The thicker you go, the heavier the door will be but 1/4 inch isn’t a crazy jump.
Great video! I have a question for you... since I don't have local access to 1/8 inch MDF, can I glue up 1/8 inch HDF with the 1/2 inch MDF? Thanks in advance!
Hey! Thanks for taking time to comment! I don’t think that would be an issue! It’s all compressed fiber board so the transition should look similar (I believe).
@@WoodNerds Good to hear. I will give it a go and report back in due time.
@munchkyn56 awesome! Yeah, I’d be interested to hear the results!
How did he know I wasn’t wearing pants?
Everyone knows you don’t wear pants!
Where'd you get the MDF from?
The mdf used in this video I got from a local lumberyard.
factory edge is nice and straight huh...
As straight as you’re going to get without a jointer/track saw/etc.
Excellent instructions. Thanks.
Slam Simulator, epic. To really test the door, let your pissed off wife in on testing. 😊
That’s a great recommendation! I’m not sure the door would have been able to handle the wrath of my wife after she saw I was using the toaster incorrectly!
MDF is plenty durable for many purposes but not everything. Anything where moisture is a potential issue it should probably just be avoided. Just use wood in those cases. If it gets wet it'll just swell and get soft. Not worth all the work to build something just for a glass of water to ruin it.
sub for the toaster
Much appreciated! More hot toaster action coming your way!
Love the stripper shirt and Bob.
Hey! Thanks Lisa! Trying to come up with more fun shirt designs.
I can't stand shaker doors they look cheap and they are. To me there's a little difference between that and a piece of plywood they wrap grooves in. Shaker doors are good for your lake house but if you want resale value buy raise panel or make.
Hey! Thanks for watching and commenting! I’m not a big fan of blanket statements like this… preference is very subjective. If you search “million dollar kitchen” and look at the results, it’s a mixed bag of styles including shaker, raised panel, and even flat slab doors (which I find the least appealing personally). To say they are cheap is a silly statement because you can make a door of any style out of any type of material. Shaker style cabinet doors made from white oak will certainly not be cheap. Raised panel doors are nice but more complicated for the average person (to whom this video is obviously targeted). The main difference between styles is simply what bits you have to create the desired profile with and if your router/shaper is strong enough to handle the rails/stiles/panels being processed(most people don’t have a shaper strong enough to shape a raised panel). I’d also argue for anything you do to your house, the more expensive the feature, the less likely it is you’ll get equal value in resale since taste is so subjective. So my advice would be, buy/build what you like.
Where the drawers?
It’s the same process, just drawer sized. I have another video on cabinet doors and drawers if you’d like to see them made with a table saw.
@@WoodNerds yeah i need to get a table saw and i am like how can it be nobody makes drawers with a skill saw its straight cuts it has to be possible. Other than the if one wants to do the fancy dovetails joiner to make the edges fit really nice but i know if one dont do those the skill saw can do it.
Your cabinet door looks great by the way. All of them do, saw the drawer face one in bathroom. Then saw the kraig jigs lol now im like ok i guess i need a few more tools 🤪. Like a woman who says i need a few more shoes
@iowac hahaha! It’s a never ending struggle my friend! I still don’t have what most would consider to be required for woodworking (jointer, bandsaw, drum sander, etc.) they are on my list though haha. One day!
@@WoodNerds you doing awesome with what you have. I wish i had someone near me with your skills that i could come on my days off and be your gopher to learn. Hey get me this hey go grab that, or ok i think you can do xyz go cut that. But yep youtube is next best thing.
I appreciate that! You’re right! Years ago, you’d have to apprentice in a shop and learn by watching and being taught by whoever had time to teach. The internet has been super valuable that way but it lacks the hands on benefits you get from being in person!
I'm pretty sure the paint, primer, and wood glue were more than $10.
Please show us using a good wood.
I guess I could! The reason I’m doing it with the cheap stuff is I constantly get comments about how no one can afford the tools needed to make doors with the good woods.
Gangster
I keeps it real!
Mitt
Well I think this video just lost you your sponsor with slam simulator....
No worries! Slamatron saw the video and offered me a sponsorship right away! Screw slam simulator!
turned off after words "u need a jig that costs a fton" nice clickbait
✌🏻
I'm gonna show you how to make these doors without a table saw. First go buy all this other stuff to turn ur saw into a table saw😂😂😂😂