Hello, I have a BenQ W11000 recently it has started to flicker but instead of no picture a bright white flash comes for a second it happens after some time of using it
Hey Surya, You can try below steps, however they are just universal options and not specific to your product - 1. Reset the projector to factory default settings 2. Change HDMI Cable 3. Check for OS upgrades (if available) And if the product is new and under warranty, get it repaired or replaced from company
HDMI CEC makes the use of a single remote for all devices, which is convenient to use in the long run. As you said, it carries power so may be responsible for damage of the equipment. But the general recommendation is to keep the same on. Can you provide more information on the same?
Hey Doc, that’s right. Its a good practice for controlling the equipments connected using HDMI cables, but in India, we have noticed that voltage fluctuations has not only damaged the HDMI cables but also the equipments’ HDMI ports too.
Sir i hv an epson projector installed in my lab..... Facing an issue of blank of projector screen after every 1-2 mins.... How cn we fix the pblm... Cn u help
I solved mine by changing the refresh rate of my laptop from 60hz to 56hz. Although doing this sometimes makes the 4K HDR video play a bit choppy and out of sync, I must set the resolution down to 1080p. But It's ok if the annoying flickering issue is solved this way! EDIT: Changing the EDID Version to 1.4 on my projector works just fine! No customization is needed on the laptop since the laptop auto-detected the screen capability that EDID.
bought brand new Viewsonic X10-4K LEDprojector. While watching any video, in 5-6 minutes the display goes off. sometimes the audio remains but video goes off. Moreover, in its OS, while switching from remote button up or down, there is flickering issue in content reading. Even it blinks too. please help.
My Sony VPL-HW40ES projector, connected to a Denon AVRX4100W, starts blinking a few minutes after changing the source (ROKU or Apple TV) output from 720 to 1080P, eventually going totally black. I've never figured it out and suffered with 720 video for the last 6 years. Any ideas?
Hi there , so I bought brand new jvc np5 4k native projector, I was watching top gun maverick and like 5 to 10 mins into the movie it started flickering. Kinda like when u turn a blender on in the kitchen and it flickers . Btwy I'm using an xbox 1x on wifi to stream 4k content. I also changed to 4k 18gbs hdmi cables . Should I hardwire my xbox to my router. What are ur solutions?
Nothing helps if the led driver (leds power source) gives that. My DLP has a battery and even if there is no ac power source, hdmi etc connected it gives that stroboscopic effect (like some LCD screens have) in menu screen.
I am using Benq Tk700 Brand New. From day 1 i am facing picture bright and picture dim in movies and sometimes in you tube content. Receiver Yamaha 3060 . Dune HD 4k Pro Media player. Currently I changed my HDMI cable 50 ft length to Blue Rigger 4k 2.1 HDMI cable. Still I face the issues. What may be the problem.
@@TanmayMehta What u said is 100% true sir . It's due to eco mode , lamp saver mode and smart echo mode . Its running smooth only at normal mode . How to correct it ? I called benq and they took my projector which is still under warranty. u r suggestion sir ?
Picture flickering on DLP projectors can be caused by light sensor and a bad colour wheel in most cases, cleaning the light sensor will stop the flickering.
Need help, talk to us -
bit.ly/GBAVIBA
My issue was resolved magically by just putting on this video!! It wasnt working all night, I pugged in this video, and you fixed it!!
Wow! Let’s make this magic video viral 😀✨
Thanks so much! Lamp life span was causing the flickering. :)
Glad it helped 😀👍🏻
Hello,
I have a BenQ W11000 recently it has started to flicker but instead of no picture a bright white flash comes for a second it happens after some time of using it
Hello Tanmay ! I am facing this issue with my new Wzatco Alpha 2 android projector ! Can you please me with the solution to model specific ?
Hey Surya,
You can try below steps, however they are just universal options and not specific to your product -
1. Reset the projector to factory default settings
2. Change HDMI Cable
3. Check for OS upgrades (if available)
And if the product is new and under warranty, get it repaired or replaced from company
Hai tanmay, suggest me a good budget branded projector
Depends on your room size, application and resolution expectations sir.
it was my refresh rate, thanks for the help! it wasnt matched with the max of the projector
Glad that worked 👍🏻😀
HDMI CEC makes the use of a single remote for all devices, which is convenient to use in the long run. As you said, it carries power so may be responsible for damage of the equipment. But the general recommendation is to keep the same on. Can you provide more information on the same?
Hey Doc, that’s right. Its a good practice for controlling the equipments connected using HDMI cables, but in India, we have noticed that voltage fluctuations has not only damaged the HDMI cables but also the equipments’ HDMI ports too.
@@TanmayMehta what if we are able to achieve a good stable current supply with the use of a good stabilizer and an UPS?
@@TanmayMehta what if we are able to achieve a good stable current supply with the use of a good stabilizer and an UPS?
Sir i hv an epson projector installed in my lab..... Facing an issue of blank of projector screen after every 1-2 mins.... How cn we fix the pblm... Cn u help
Did you try any of these 7 tips?
I have a NAYONFA 5G&2.4G WiFi Projector 10000L Flickering got fixed by using another outlet plug without the extension cord, thanks a lot.
I solved mine by changing the refresh rate of my laptop from 60hz to 56hz. Although doing this sometimes makes the 4K HDR video play a bit choppy and out of sync, I must set the resolution down to 1080p. But It's ok if the annoying flickering issue is solved this way!
EDIT: Changing the EDID Version to 1.4 on my projector works just fine! No customization is needed on the laptop since the laptop auto-detected the screen capability that EDID.
bought brand new Viewsonic X10-4K LEDprojector. While watching any video, in 5-6 minutes the display goes off. sometimes the audio remains but video goes off. Moreover, in its OS, while switching from remote button up or down, there is flickering issue in content reading. Even it blinks too. please help.
Hey Shahzad, lock a complaint with the company's service center. It can either be -
1. Projector issue
2. HDMI Cable issue
3. HDMI output of the AVR
My Sony VPL-HW40ES projector, connected to a Denon AVRX4100W, starts blinking a few minutes after changing the source (ROKU or Apple TV) output from 720 to 1080P, eventually going totally black. I've never figured it out and suffered with 720 video for the last 6 years. Any ideas?
Check the video settings in Denon, and change the refresh rate of Roku or Apple TV to 1080p at 50Hz
thank you for this video. It gave me the information to fix the issue. My issue was refresh rate on projector and computer was different.
Glad it helped
Hi there , so I bought brand new jvc np5 4k native projector, I was watching top gun maverick and like 5 to 10 mins into the movie it started flickering. Kinda like when u turn a blender on in the kitchen and it flickers . Btwy I'm using an xbox 1x on wifi to stream 4k content. I also changed to 4k 18gbs hdmi cables . Should I hardwire my xbox to my router. What are ur solutions?
Nothing helps if the led driver (leds power source) gives that. My DLP has a battery and even if there is no ac power source, hdmi etc connected it gives that stroboscopic effect (like some LCD screens have) in menu screen.
Hello sir,My projecter is running but screen is turning on and off but video is playing, please help me to resolve this
Did you try any of these fixes?
I am using Benq Tk700 Brand New. From day 1 i am facing picture bright and picture dim in movies and sometimes in you tube content. Receiver Yamaha 3060 . Dune HD 4k Pro Media player. Currently I changed my HDMI cable 50 ft length to Blue Rigger 4k 2.1 HDMI cable. Still I face the issues. What may be the problem.
Why don't you lock a complaint with Benq? Also, try checking picture mode settings and normal and eco mode. It can be due to eco mode too!
@@TanmayMehta What u said is 100% true sir . It's due to eco mode , lamp saver mode and smart echo mode . Its running smooth only at normal mode . How to correct it ? I called benq and they took my projector which is still under warranty. u r suggestion sir ?
Mine was frame lock. I turned it off and it stopped flickering.
DUKANE IMAGINE PRO 8933W
Thanks for the share 👍🏻
Hello sir
Sir i changed lamp and ballast circuit in viewsonic pjd 7720h projector.but still flickering.
Please tell some tips
Did you try the mentioned 7 tips? Also, can you share your AVR configuration?
Yes
But still flickering
I spent 10,000
Picture flickering on DLP projectors can be caused by light sensor and a bad colour wheel in most cases, cleaning the light sensor will stop the flickering.
Thanks for the share!
I am using viewsonic mini projector. It has started flickering
Lock a complaint urgently and check for the source. Try ensuring a clean power supply to projector!
I get flickering green screen no video I’m using Yamaha v6a receiver Sony 4k projector baluns cat 6. Apple tv
Try adjusting the refresh rate and switching to HDMI for Projector to AVR connection
you forgot clean ±1% AC power?
Only IGBT PVM BASED true double conversion online ups can provide it. UTL Alfa Online Ups will do!
The second and seventh step is about Power Supply
@@TanmayMehta cool
Facing the with video capture card in to out
Having a hard time to understand & digest what he's explaining
Old video so must be! Try to check new ones for better results!
@@TanmayMehta Sokey il passa..dowana to falla intowa diabetic coma tryina understanda watcha sayinga. For no reason il get a migraine