how to turn between centres,no drive dog
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- how to turn between centres,no drive dog
với cái này chúng ta có 2 chống tâm cùng làm việc.kẹp giữ thay cho mâm cặp.tác dụng hay của nó là tiện được hết dọc trục mà không cần trở phôi giúp gia công chinh xác và nhanh hơn
I'm not a machinist but enjoy watching the process. I don't know how useful these tools are but they are so cool to watch them being made!
It's cool but if you are holding with a chuck you would have to recut the taper on the center every time you use it
Thank you. I learn a lot from you. You are a smart man❤
❤
Tôi ngưỡng mộ công việc của bạn, chúng là những tác phẩm tuyệt vời mà bạn tạo ra chúc mừng 🇧🇷👋
Nice design, initially I thought it wouldn't have much use except for anything larger than the collar diameter. But hey, a ground spacer collar could step down the collar face to work and allow for locking of smaller parts. Well done!
The threads and the nut on the driven center will ecert pressure on the work and tend to move the work towards the tailstock and away from the driven center thus tend to having less support from the driven center.
Yes exactly right. Runout to the center and perpendicular to the face problems.
Hello, I live in Turkmenistan and you are such a master👍
It's possible to push the part off the center. This will cause runout to the center on the drive side. Its better to put a small spot face hole offset from the center. Drive on that. If you need to, you can leave the part long on the drive side, then surface grind that side to remove the spot face.
Nice sir ji
Nếu đã dùng hai mũi tâm gia công đồng trục chính xác cao dùng mặc đó tùy vào để truyền động dùng lực xiết như vậy thì mũi tâm ngay đầu xiết đó đâu còn tác dụng là chống tâm hai đầu nữa.
Đúng! Chính xác! Nếu hiểu được như thế sẽ có cách để sử dụng cái này.
Exactly what I said. There will be runout to the center. There will also be out of perpendicular to the face on the drive side.
بسیار عالی...🎉❤🎉
It's good idea! Thanks!
Excelente ferramenta show parabéns mais uma na coleção valeu 🇧🇷🙏
Vous êtes excellent! Merci pour ces vidéos!
👍 Super, jedyne co mi nie pasuje to kieł wymontowany i zamontowany w uchwycie trójszczękowym nie bedzie idealnie w osi ale do mniej precyzujmych prac jest ok, powodzenia
Hello thank you for your video.
But Ihave a question?!
It dont make live center ballbearing be damaged?(because of the prees that you do with screw)
Mua hột dao nhẹ tiện bóng đi cho ok ,lăn bóng đó có vào đc góc vuông đâu b
Hola mi chico inteligente que manos benditas mi chico hermoso buen video mi papi lindo
The best friend👍👍👍👍
Thanks French👍
Хорошая работа👍
Qual aço você usou? Ou a peça é de alumínio?
Ótimo trabalho 🇧🇷🇧🇷🇧🇷
Интересный вариант зажима в центрах без оправки.
Làm như bạn sai bét chỉ cần đầu chống tâm ụ động lỏng nhẹ là đi mũi dao
Bạn là nhất rồi
Lỏng bằng niềm tin ah😂😂😂
Chỉ cần sử dụng đầu chống tâm gai bên mâm cặp là được rồi, đâu cần phải phúc tạp vậy
@@HảiNguyễnNgọc-o4pchống tâm hai đầu như bạn nói chỉ làm đồ nhỏ và ăn mỏng thôi còn dài và ăn dày vẫn phải có tockep.
Tiện mỏng mà sao lỏng đc. Trừ khi bạn quên gạt tay siết ụ động thôi
Very clever!!!!!!!!!!!!
две левых резьбы! Я в восторге.
Отлично!
❤❤❤❤
Great idea. To bad it is so diameter specific. I'd have to make 10 different sizes of them
Why should that be the case?
You can span every dm over the locknut you have, just not under.
@@fearlyenrage that is the problem
@@EitriBrokkr question: why should that be a problem?
For me i define a problem as a tool i cannot use but this tool i could use.
I mean the idea is simple and ease to use, you could also use just the tailstock and a spike in the cuck you have pinpointed down before use, that would work to.
But anyhow is seem not as a unusable tool to me.
Chia sẻ tuyệt vời mới lạ và hữu dụng rất tuyệt. Cảm ơn bạn đã chia sẻ 👍👍👍👍
Di dove sei? Che devo venire a imparare da te😅
Your head stock is not centred right. If you will do it, you do not nead this.
Super cool design and execution!!! ❤ I have one question, why did you make the taper go so wide, making it a smaller diameter would allow for a wider range (smaller) diameters…….
Thank you for sharing the video, one of your interested followers from Saudi Arabia