Lift or raise it, lower or raise the air. That’s about it, I still use the tunes 9001 skimmer from my nano on a 40 breeder with a 10g sump. I like small skimmers that I remove the cup and clean repeatedly and often. Work horses for sure, wouldn’t pull much out of my 20g for that reason. Idk why it’s rated for such small tanks, should be rated for bigger IMO. Says heavy bio load 17g water volume, which I doubt that’s true tbh
@@John_Benson yeah, it took a while to get my tunze 9001 dialed in and set up properly. Took about 2 months of just little tweaks and watching/waiting. Got an ato and that helped with 90% of the problem once it was through the break in period after physical manual cleanings.
Most of us around here will skip the skimmer on a tank that small as water changes are really quick and easy to perform given the small volume. That said, there are a few nano skimmer options like the Bubble Magus QQ1 and Eshopps in-sump nano skimmer
Really interesting. My skimmer is actually making something like boiling water without any stink. In my case i think it is a pump problem because it sometimes make a sort of vibrating noise, and since it do that, the bubble produced are not the same. Did you already see something like that
Can you do one of these for HOB Aquamaxxx skimmers. Mind blows huge bubbles makes gross water in the cup, but never foams. Sometimes fills up super fast.
Can you do video on tuning a Octo Reef HOB 1000 Protein Skimmer. I have one just got it hooked up and seems like it’s not foaming I have a silencer on it. Came with a air valve but the guy did not hook it up. BTW it’s the newer version with the white input & output heads. Thank you
My skimmer is at max air speed, and the bubbles break where the cup connects to the base, but the foam head only coats the inside of the cup's neck and not getting over into the cup itself. do I need to adjust the skimmer to be high so it gets over the top? I have a Reef Octopus Reagal 250INT and use mesh socks
Hello, could you please guide me, why sometimes the skimmer becomes like fresh water and makes big bubbles. And then again fix is that any problem in water?!
I got the Bubble Magus Curve 9+ and that bad boy stinks to high heaven! 😂 I always hate maintenance time when I clean the collection cup and lid really good. Whole house gotta be aired out. My sump stand has holes in the back of it for cords, and last summer between the heat/humidity I had to actually cover the lid holes with plastic cling wrap to prevent the wafting through the house lmao 😂 Love/Hate relationship with it.
My skimmer was working awesome just had to clean it out and the smell is rancid one day it over flowed witch never happens it’s been like a month since I deep cleaned whole skimmer after cleaning everything went back to normal
What about when the skimmer keeps collecting clean-looking water? It doesn't stink, very clear. Even at the leanest setting, my skimmer still bubbles over with clearer water. My tank recently went thru a mini cycle due to adding cured dry rock, but the skimmer continues to bubble almost half of 50 gallons. I cant just keep replacing the RODI water. The last thing I can think of is wait a lil longer for the cycle to finish...
High guys …I am new here and just subbed. Can you direct me to a video that covers all the basics of the first time start of what I’ll need. I mean everything from ( I am thinking a 20 tank and all the equipment) , I mean All that I’ll need. I am confused for example , is this device you are highlighting in this video needed. I appreciate any help ….cheers
Here is the link to our 5 Minute Saltwater Aquarium Guide. It's a series of quick videos with direct advice on how to get your first tank started 🙂 th-cam.com/play/PLBaMLrfToJyxJ1PuJZwhkxvvdFP14eV_t.html
I've got an Octo 110S and I think it's set up okay. However, my foam isn't particularly constant, it seems to rise and fall depending on what it's collecting. I do see reasonably darker skimmate in the collectors cup and it stinks when it does collect. Is it odd that it should rise and fall like this though? I find it I try and keep the head up top it'll overflow quickly all of a sudden over night etc.
Same thing was happening with my 110 sss. I had a light bioload for that skimmer and my water was really clean, not very many nutrients in the system... since then I've removed the filter socks. I just use very coarse grade filter mesh that let's all the food particles through. The skimmer works much better, more consistent, darker skimmate. I also feed a little more than I used to. The skimmer likes it!
It sounds like your skimmer may be oversized for the tank/bioload. When you get inconsistant skimmate production, that's usually the case. Like the other commenter mentioned, removing your filter socks (or other mechanical filtration) may actually help the skimmer perform more consistently.
Ok, I’d say that if you take the lid off your skimmer and my wife doesn’t complain I would immediately test her for Covid 😂. On the DC skimmer along for the journey, I do not believe it would work, because of the diameter of the neck. In fact, I believe you guys addressed this already in a previous video. Cheera
Lucky me , both my experience of using Deltec APF-600 and Bubble King Supermarin 250 for my 120 gallon 4x2x2ft tank , the smell from 1 full skimmate always drives my sibling coughing mad ! Emptying it makes me on the verge of throwing up , smell of baby faeces . The things we endure for this hobby !
seems like either no one runs external skimmers anymore or the people who do are seasoned enough to know how to fix their issues. Either way there seems to be little to no content about tuning an external skimmer. I'd love to see BRS mention external skimmers in videos like this one
For some reason, recirculating skimmers still haven't caught on. At least, not as much as traditional one pump skimmers have. Recirculating skimmers are awesome because, as you already know, the ability to adjust the feed pump independently of the bubble producing re circulation pump is just one more layer of fine tune control 🙂
@@BRStv yes! But with all that adjustment I feel like I might be missing something. For example I used run high flow through it and it worked alright but I now run medium-to-low flow(which is probably closer to what Reef Octopus recommends) and it works so much better. It seems to pull more organics in my low nutrient system than my insump skimmer does in its high nutrient system
When you tested the air flow at different depths in other video the results were different than what you suggest here, deeper water level equals less air flow, shallower resulted in more air flow, you got it wrong here suggesting to reduce the water height to reduce air flow, head pressure is not as relevant as you think
If you can raise it up even further, try that next. This is one of the easiest ways to get the skimmer from overflowing. Also, make sure that you haven't dosed any chemicals or medications to the tank recently as many of them can cause your skimmer to go a little nuts for a while.
“ This video is the solution” *TO YOUR TANKS POLLUTION*!!! Come on, guys. I can’t believe you let an opportunity like that slip right through your fins 🐋 … 🥺😞😭
A protein skimmer is a piece of equipment that we use for saltwater aquarium filtration. This video is a great explanation of what a protein skimmer actually does and how it works 🙂 th-cam.com/video/nxIHutSG1Vc/w-d-xo.html
![ประสบการณ์ จ้าง Developer ที่ผมจะไม่มีวันลืม [ภาค2]](http://i.ytimg.com/vi/pZbsSDRrmXA/mqdefault.jpg)
I'd be interested in seeing something like this for the nano skimmers what can fit in the back chamber of the AIO tanks.
Fluval ps2 skimmer xo
Lift or raise it, lower or raise the air. That’s about it, I still use the tunes 9001 skimmer from my nano on a 40 breeder with a 10g sump. I like small skimmers that I remove the cup and clean repeatedly and often. Work horses for sure, wouldn’t pull much out of my 20g for that reason. Idk why it’s rated for such small tanks, should be rated for bigger IMO. Says heavy bio load 17g water volume, which I doubt that’s true tbh
Nano skimmers are for sure tough to get dialed.
@@John_Benson yeah, it took a while to get my tunze 9001 dialed in and set up properly. Took about 2 months of just little tweaks and watching/waiting. Got an ato and that helped with 90% of the problem once it was through the break in period after physical manual cleanings.
Agreed, something on small skimmers like the fluval mini
I have learned so much from you guys. Thank you for doing what you do.
Thanks for the constant great info guys 🙂
You’re amazing guys thanks a lot for all your videos!!! Always Help me a lot! Bless
Great video! Can you do a video on the K1 nano skimmer? I have one on my JBJ 45 gallon. Thank you
It's funny how Randy reacts when Ryan's talking. Pretty much in every BRS video. 😁😃
😀nod nod 😃 nod nod 😀nod nod 🙂
Whats he supposed to do?
Lol yes
Randy..awesome information you are presenting…can you make a video comparing skimmer running 24 hrs a day vs operation only at night time?
2:34 Thomas always gets a 👍
This taught me everything i needed to know Thank you so much🤣
what’s also good for some nano tanks? Like 10-15 gallons and either a protein skimmer or any other methods
For that small of a tank I would skip the skimmer and run a 24/7 continuous water change with 2 dosing pumps.
Most of us around here will skip the skimmer on a tank that small as water changes are really quick and easy to perform given the small volume. That said, there are a few nano skimmer options like the Bubble Magus QQ1 and Eshopps in-sump nano skimmer
Really interesting.
My skimmer is actually making something like boiling water without any stink.
In my case i think it is a pump problem because it sometimes make a sort of vibrating noise, and since it do that, the bubble produced are not the same.
Did you already see something like that
Can you do one of these for HOB Aquamaxxx skimmers. Mind blows huge bubbles makes gross water in the cup, but never foams. Sometimes fills up super fast.
You can absolutely tune it with the wedge the cavat being you need to keep the water level exact with the top off switch
Very good advice
Since going German (Deltec and Bubble King) every skimmer has just been set it and forget it. Can’t recommend them enough!
Can you do video on tuning a Octo Reef HOB 1000 Protein Skimmer. I have one just got it hooked up and seems like it’s not foaming I have a silencer on it. Came with a air valve but the guy did not hook it up. BTW it’s the newer version with the white input & output heads.
Thank you
Octo-150 classic is the best of all
My skimmer is at max air speed, and the bubbles break where the cup connects to the base, but the foam head only coats the inside of the cup's neck and not getting over into the cup itself. do I need to adjust the skimmer to be high so it gets over the top? I have a Reef Octopus Reagal 250INT and use mesh socks
Hello, could you please guide me, why sometimes the skimmer becomes like fresh water and makes big bubbles. And then again fix is that any problem in water?!
I only run a canister on my sps reef tank never used a skimmer or a sump
Hii sir am facing trouble with regal 300 int can u plz help me out
Controlller Blinking light & skimmer getting off
I cant do this with the bubble magus curve 9
I got the Bubble Magus Curve 9+ and that bad boy stinks to high heaven! 😂 I always hate maintenance time when I clean the collection cup and lid really good. Whole house gotta be aired out. My sump stand has holes in the back of it for cords, and last summer between the heat/humidity I had to actually cover the lid holes with plastic cling wrap to prevent the wafting through the house lmao 😂 Love/Hate relationship with it.
im currently using bubblemagus z6 skimate stinks like something dies holding my breath everytime i clean my collection cup
My skimmer was working awesome just had to clean it out and the smell is rancid one day it over flowed witch never happens it’s been like a month since I deep cleaned whole skimmer after cleaning everything went back to normal
can i replace my AC pump on my octo skimmer with a dc pump but use the same skimmer body.
Most of the Reef Octopus AC skimmers can be retrofit with the Varios skimmer pumps, but it does depend on which model we're talking about.
@@BRStv i have the Diablo XS160
What about when the skimmer keeps collecting clean-looking water? It doesn't stink, very clear. Even at the leanest setting, my skimmer still bubbles over with clearer water. My tank recently went thru a mini cycle due to adding cured dry rock, but the skimmer continues to bubble almost half of 50 gallons. I cant just keep replacing the RODI water. The last thing I can think of is wait a lil longer for the cycle to finish...
High guys …I am new here and just subbed. Can you direct me to a video that covers all the basics of the first time start of what I’ll need. I mean everything from ( I am thinking a 20 tank and all the equipment) , I mean All that I’ll need. I am confused for example , is this device you are highlighting in this video needed. I appreciate any help ….cheers
Here is the link to our 5 Minute Saltwater Aquarium Guide. It's a series of quick videos with direct advice on how to get your first tank started 🙂
th-cam.com/play/PLBaMLrfToJyxJ1PuJZwhkxvvdFP14eV_t.html
no filter sock! use without it!
I've got an Octo 110S and I think it's set up okay. However, my foam isn't particularly constant, it seems to rise and fall depending on what it's collecting. I do see reasonably darker skimmate in the collectors cup and it stinks when it does collect. Is it odd that it should rise and fall like this though? I find it I try and keep the head up top it'll overflow quickly all of a sudden over night etc.
Same thing was happening with my 110 sss. I had a light bioload for that skimmer and my water was really clean, not very many nutrients in the system... since then I've removed the filter socks. I just use very coarse grade filter mesh that let's all the food particles through. The skimmer works much better, more consistent, darker skimmate. I also feed a little more than I used to. The skimmer likes it!
It sounds like your skimmer may be oversized for the tank/bioload. When you get inconsistant skimmate production, that's usually the case. Like the other commenter mentioned, removing your filter socks (or other mechanical filtration) may actually help the skimmer perform more consistently.
Ok, I’d say that if you take the lid off your skimmer and my wife doesn’t complain I would immediately test her for Covid 😂. On the DC skimmer along for the journey, I do not believe it would work, because of the diameter of the neck. In fact, I believe you guys addressed this already in a previous video. Cheera
Lucky me , both my experience of using Deltec APF-600 and Bubble King Supermarin 250 for my 120 gallon 4x2x2ft tank , the smell from 1 full skimmate always drives my sibling coughing mad ! Emptying it makes me on the verge of throwing up , smell of baby faeces .
The things we endure for this hobby !
seems like either no one runs external skimmers anymore or the people who do are seasoned enough to know how to fix their issues. Either way there seems to be little to no content about tuning an external skimmer. I'd love to see BRS mention external skimmers in videos like this one
For some reason, recirculating skimmers still haven't caught on. At least, not as much as traditional one pump skimmers have. Recirculating skimmers are awesome because, as you already know, the ability to adjust the feed pump independently of the bubble producing re circulation pump is just one more layer of fine tune control 🙂
@@BRStv yes! But with all that adjustment I feel like I might be missing something. For example I used run high flow through it and it worked alright but I now run medium-to-low flow(which is probably closer to what Reef Octopus recommends) and it works so much better. It seems to pull more organics in my low nutrient system than my insump skimmer does in its high nutrient system
My BK Supermarin 160 pulls dark stuff out, but it doesn’t really smell. Bad sign? Anyone else? I have a heavy bioload, btw.
That one on the right looks like my redstarfish skimmer I wonder if they ripped off your version 😆
still using an ASM mini G....haha thing just don't quit....greatest cheap skimmer that existed....not sure it's made anymore
❤️
When you tested the air flow at different depths in other video the results were different than what you suggest here, deeper water level equals less air flow, shallower resulted in more air flow, you got it wrong here suggesting to reduce the water height to reduce air flow, head pressure is not as relevant as you think
What if it’s a hang on tank skimmer yall never address those type of skimmers
My skimmer overflows excessively, its on a stand and it has a water flow control
If you can raise it up even further, try that next. This is one of the easiest ways to get the skimmer from overflowing. Also, make sure that you haven't dosed any chemicals or medications to the tank recently as many of them can cause your skimmer to go a little nuts for a while.
@@BRStv thanks g, I’ll try the air valve as well
“ This video is the solution” *TO YOUR TANKS POLLUTION*!!!
Come on, guys. I can’t believe you let an opportunity like that slip right through your fins 🐋 … 🥺😞😭
What is that???
A protein skimmer is a piece of equipment that we use for saltwater aquarium filtration. This video is a great explanation of what a protein skimmer actually does and how it works 🙂
th-cam.com/video/nxIHutSG1Vc/w-d-xo.html