My pin charger melted when it touched my metal legged desk. tried to find a replacement but the aftermarket pins didn't exactly fit well enough for continuous charge. I'm planning to make this from the ill-fitting charging cable. Thanks and I'll let you know if successful. A genius idea.
Thank you for the good explanation. Do you know if this is the outer 2 for the 5 volts and ground in all devices with 4 pins? I have a 4 pin GPS Tracker but no magnetic charging cable is included.
I really wanted to add this comment cuz it really worked ....like no joke ....works on Samsung gear sport ....thanks Edit :Later I found out it was a ripoff
I just need to charge my Garmin Descent MK2i till I get my Cable back, not sure if the pinouts are the same but where did you get them from? Edit, found my old spare Descent MK1 spare cable and chopped the Plastic to charge :-)
I like you video, I intend to try it. Just 1 question. Instead of charger, can I use a mouse. Then I connect the mouse usb to a electricity adapter. I have some broken mice, and I don´t want to breke a phone charger. Thank you
You could use the data wires if you wanted to access the files on the watch or upload using a PC. But this video was just for charging the watch. It might be a bit difficult to get a stable connection with four pins at the same time but there's nothing to stop you trying it.
Did the original charger plug into a usb charging head? If so then it most likely uses 5 volts so should work if you can find the pin out for the watch
@@tomm8815 yes original. Charger has usb type but i dont know it is 5walt or more. Can you pls look for kospet prime specs & reply me back as my original charger not working and i am not gettin from market not even from online store.
I can't seem to find the diagram for my watch (NiceFuse W3 SmartWatch), is there any other way to determine the pin out for both ports? As to know which is positive and which is negative
I just threw in the trash and made it again This time I followed all the steps (I don't know why it didn't work first time) And thank God it worked, at least the watch screen shows "charging" But I'm preoccupied with overheating This thing seems like it could start melting
I can't tell you how much you helped me today bro but just keep helping people......i made this and now my watch is charging ❤️
I tried it and it worked for my forerunner 235. thanks for the person who made this video
Great video! You saved me in mexico. I used a 9v battery and pen spring for no electrical outlet! Thank you!
Thanks man, it worked like charm.. perfect solution until I get the order delivered
Thanks a lot!!
It's works perfectly in a Descent MK1.
Very useful, easy to do and cheap.
Thanks for the video. I just made one for my smartwatch from USB cable.
Amazing work made one for me today working fine.. Thanks mate👍👌👌👌
My pin charger melted when it touched my metal legged desk. tried to find a replacement but the aftermarket pins didn't exactly fit well enough for continuous charge. I'm planning to make this from the ill-fitting charging cable. Thanks and I'll let you know if successful. A genius idea.
I was try and... It work!!! Thank you
Thank you for the good explanation. Do you know if this is the outer 2 for the 5 volts and ground in all devices with 4 pins? I have a 4 pin GPS Tracker but no magnetic charging cable is included.
IT WORKS ON GARMIN FORERUNNER 225
EXELENT IDEA
THANK YOU VERY MUCH.
Saved my life!
Thank you for my watch charged ❤️
I dont have paper clips what to do ??? I have the garmin fenix3 hr
I really wanted to add this comment cuz it really worked ....like no joke ....works on Samsung gear sport ....thanks
Edit :Later I found out it was a ripoff
Glad it helped
I just need to charge my Garmin Descent MK2i till I get my Cable back, not sure if the pinouts are the same but where did you get them from? Edit, found my old spare Descent MK1 spare cable and chopped the Plastic to charge :-)
Great! Worked for me 👍🏻
Super, j'ai fabriqué un système différent proche de ton système et funcione bien 👍🖖
Thank you, it works! Garmin 35
Thank you for this this method help me with kw98 I ordered cable it will take 1 week tell then can I use this method
Bro you are doing a good work carry on
Thanks
Thanks bro🎉🎉🎉🎉🎉🎉❤❤ 4:44
Cheers mate, this was a very genius idea
Will this for magnetic 4 pin also?
Thanks man. Worked fine with my instinct. :)
Thanks you so much!!!
Thanks bhaiya
i cannot find the pin-out information for a Sunnto 7, if anyone (or Tom) can assist?
Great hack thanks
For garmin fénix 2 is the same?
Works on Garmin vioactive 3 thank you!
Any solutIon for 4 pin? Please help
If your watch has 4 pins that means there are 2 for charging and 2 for data transfer.
If you want to charge it then just make 2 pin
THANKS BRO😀😀👍👍👍🏼
how about with 3 pins ?
it works thank u so much man
Me funcionó pefecto!
I like you video, I intend to try it. Just 1 question. Instead of charger, can I use a mouse. Then I connect the mouse usb to a electricity adapter. I have some broken mice, and I don´t want to breke a phone charger. Thank you
I didnt think of that but yes a usb mouse wire should work fine as long as you can determine the power and ground wires from the data wires
@@tomm8815thank you!
Hello brother
I tried and its work
Thx a lot.
yo lo hice con un borrador y unos alfileres
Agradable. no pensé en eso
Bro what about the data wires they could be needed so why did u not use them
Are they nesaccary?
You could use the data wires if you wanted to access the files on the watch or upload using a PC. But this video was just for charging the watch. It might be a bit difficult to get a stable connection with four pins at the same time but there's nothing to stop you trying it.
Does this also work for a 2 pin smart watch? Thanks
Possible. If there are only two pins, it would suggest that they are to charge the watch
Thanks mate . I made one for my amazfit
Nice, good to know it workes for multiple watches
Genius
# respect
Can i charge my kospet prime smart watch with 4pin adapter. Pls reply. 🙂
Did the original charger plug into a usb charging head? If so then it most likely uses 5 volts so should work if you can find the pin out for the watch
@@tomm8815 yes original. Charger has usb type but i dont know it is 5walt or more. Can you pls look for kospet prime specs & reply me back as my original charger not working and i am not gettin from market not even from online store.
It will work on Hysek Slyde HD3 watch
4 pins ?
well done brother
Thank you bro
great information 🙏🙏
Muchas gracias
TX for this 👍👍👍👍🙏🙏
No problem 😊
Good job 👍
Hi, anyone know what the suunto spartan usb pinout diagram is?
Did you find the diagram? I need it to
I cannot fin the pin-out for a Suunto 7 either??
I can't seem to find the diagram for my watch (NiceFuse W3 SmartWatch), is there any other way to determine the pin out for both ports? As to know which is positive and which is negative
do you know what happens when you switch the positive and the negative? will it break the watch???
Wait. I did it. It started charging bit then stopped. Tried to turn on but it's not turning on anymore. Guess I should've bought another charger ...
I just threw in the trash and made it again
This time I followed all the steps (I don't know why it didn't work first time)
And thank God it worked, at least the watch screen shows "charging"
But I'm preoccupied with overheating
This thing seems like it could start melting
Update: left it charging at night. It worked. 10/10
Thanks my smart watch is on thanks
great ....
👍
Thanks it’s working
how to tell which one + or - ?
Generally + is red and - is black or a dark colour, if you have a multi meter you could check
@@tomm8815 Not the wires I ment on the watch how tell + or -
@@lawrencejd8935 oh, you have to look up the pin out diagram for your watch or check any forums for people who know
@@tomm8815 Thanks mate
@@tomm8815 what happens if you switch the two acidentally? will it break the watch????
Muchas gracias funciona 👌
Wow good jobs 😂
Now I can charge my Vigorun Smartwatch
Thanks bro you are great
Very good!
🙌🏿
Couldn’t get it to work
Did you use a USB cable that was working before hand ? And did you connect the right wires to the pins on the back of the watch?
Now my thor 3 pro can esly charge thx
Big brained fellow
Ferry useful
❤❤❤❤❤❤❤❤❤❤❤
Is it work the same for Garmin Epix cradle/charger?