Crucial TIPS To RECONDITION YOUR VEHICLE BATTERY Using NEW Arc Welder, For Cars Trucks, Semi, RV
ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- If you bought the new Welder here are some very Helpful tips!
THE BEST Ceramic Coating EVER goo.gl/z9TrgR
Hoolios Tools Below
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
Welder Used in video amzn.to/3L0yP5v
You can go with the 180 AMP amzn.to/3OX5pqa
or
You can go with the 200 AMP amzn.to/3EjGjgd
Syringe amzn.to/44tvouU
Distilled Water amzn.to/3L0brFo
Best Welding Gloves amzn.to/3KZS53b
Best Welding Helmet amzn.to/3OTXmKF
Wall Mounted Power Washer amzn.to/3PeGYpq
Original Battery Video • How To RENEW CAR & TRU...
Our Motorcycle Channel / sweetscoots
Camera Used amzn.to/45khwnm
For OUR FREE GIVEAWAY
Just Send a comment to us that you want a free sample in our free giveaway.
Our channels:
/ sweetprojectcars
/ mrknowitallguru
/ sweetscoots
/ sweetmotorhomes
ALERT**** Throw out your WD-40, PB Blaster along with all your Slick 50 because we found the best Lubricant for EVERYTHING tinyurl.com/bd...
We Guarantee you will love it.
________________________________________________
If you would like to help us out.
www.paypal.me/...
________________________________________________
The small compensation we receive from the Amazon links helps to keep our channel available to you ALL for FREE!!
****Disclaimer****
Due to factors beyond the control of SWEET PROJECT CARS, we cannot guarantee against the improper use or unauthorized modifications of this information. Make sure you check with your manufacturer to make sure this will not affect your factory warranty. SWEET PROJECT CARS assumes no liability for property damage or injury incurred as a result of any of the information contained in these videos. Use this information at your own risk. SWEET PROJECT CARS recommends safe practices when working with tools seen or implied in our video and written content. Due to factors beyond the control of SWEET PROJECT CARS, no information contained on this TH-cam channel shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this content is the sole responsibility of the user and not SWEET PROJECT CARS.
Folks here are some great tips to using your new battery re-vamping machine. Quote of the Day: *When a man opens a car door for his wife, it’s either a new car or a new wife*
Thanks
My battery is boiling over at 30. What am I doing wrong?
mike turn it down until it is just boiling and let it do its job there and make sure you dont have too much electrolyte in the battery
Thanks, Sweet for encouraging all of us to restore old sulfated batteries the easy way- with our DC welders. May I suggest for everyone's safety that everybody get a 2' long black ground cable and a 2' long red hot cable and take a minute attaching those to your battery. Then when you are clamping the welding ground and your positive electrode stingers and charging with caps removed, any sparks you get are nowhere near the open battery. Just a friendly suggestion. Keep up the good videos, Sweet!.
Thank you for watching and sharing, have a great day. mad Mike
Hey 👋 Mr. Revamp Champ!!!😂 I took the ground clamp off my welder and put a Mag Nut on it, bestest thing I ever done👍 BroTher, y'all have a stupendously awesomely week!!!
and don't forget to tell Miss Esméralda that Hoolio said "duh huh" she'll know whatcha mean 😂🤣😅🤣😅🤣
Awesome Jay!! Thanks as always for the view and input, we really appreciate it! Everyone sends their best to you and yours, hope you have a fantastic week as well my friend. mad Mike & team
Thank You for the clarification, as well as where to set the welder. What to do, as well as what not to do, so you don't blow your fuse or cause boil over great tips and advice 😀
Glad to help Kevin! Thank you for watching and commenting, it's always a pleasure my friend, have a great week. mad Mike & team
Great small unit Mike. Thanks for sharing. Have a great week! Regards Nico.
It really is Nico! Thanks for watching and sharing my friend, have a fantastic week as well. mad Mike & team
Thank you! It worked here. Just the breaker tripping... But the battery is like new with 8 cycles and 24h of slow 2A charging.
Nice work my friend!! Glad we could help! Thank you for watching and sharing your sweeeeet results, hope you have a great week. mad Mike & team
For anyone who is trying this and your breaker keeps tripping...use the arc force setting on the right side light. This allows you to start at 0 power to get a good boil for 5 mins then the 10 min rest. Slowly work up to 30 power. This is working for me. Arc force gives more amps at less volts so the breaker won't trip
Thanks for the tip. I’ll give this a try, because I keep tripping my breakers even at 50.
Perhaps it’s because I have a new home with all these fancy breakers: dual purpose combination AFCI/GFCI
Thanks Mike, I recall this video well and did something similar during covid days for battery.
Glad to help Kyle! Thanks as always for watching and sharing, hope you have a great week my friend. mad Mike & team
I had the problem with breaking breakers, and that may have been my problem I'm not sure. I know my circuits aren't that great. I just took my ecoflow battery backup system and it worked just fine with running the machine. I started at 30 and ramped up to 70. Bottom line is I got the job done! Oh, and I just had another clamp that I used to clamp onto the battery post and then use the units clamp to clamp onto that clamp. I guess you could say I had a clamping good time hahaha
Thanks for the tips Leonard, we truly appreciate the input as it helps other viewers! Have a fantastic week my friend. mad Mike & team
Awesome, Thank you! & for the quick reply 🤙🏻
Glad to help David! Thanks again for watching, have a great day. mad Mike & team
Awesome video, thanks for all the insight, and instruction! This seems to work very well for flooded batteries. Has anyone tried this with an automotive AGM plate type? I have a 7 year old Deka AGM that is finally showing “REPLACE” when checked with a battery tester. Continuity is also “bad” apparently, at just over 12%. All my other batteries show around 5%, but they are the flooded type.
Regardless, I have nothing to lose so I’m going to give it a shot, after unsealing it and adding a bit of distilled H20 into each cell. Since I was just quoted $291 for a new Group 48 760 CCA replacement from Napa. I suppose the worst thing that can happen is showing up there with a slightly crispy core return...😂
Thanks again
Mike. I bought the MMA 200 a few days ago. I plugged it in to several different 110 volt outlets in the house, some with 15 amp breakers and some with 20 amp breakers, and was unable to keep the machine running for more than 10 seconds before the breaker tripped and turned off the machine. What voltage and amperage circuit breaker are using in your videos using the Vevor? So, I took the machine to a friends house and plugged it in to 220 volt service and was able to run five 2 min/5 min cycles on a 12 volt deep cycle marine battery that is no longer taking a full charge. Before the cycles, the battery measured 10.6 volts on the multimeter. After the cycles, the battery measured 12.9 volts and load tested beautifully (only dropped down to 12.5 volts under load). Thats' the good news. Now, for the bad news. I got home, reinstalled the battery in my boat, hooked up all the wires, turned on my two depth finders and within 5 minutes of powering the depth finders, the voltage on the battery dropped to 10.6 volts. What is going on? Have you seen this before? Any advice would be appreciated. Thanks.
I also bought the 200 series and I'm having the same problem with my breakers. In the video he's using the 140. I guess bigger isn't always better.
Just the instruction I needed! Thanks
Glad we could help! Thank you for watching and sharing, hope you have a great week my friend. mad Mike & team
Mike I have followed your directions to a tee and after about two and a half minutes the breaker blows. I have the welder set to the suggested settings. I have tried multiple locations and still have not got it to go past a few minutes. I am assuming the positive cable goes on the positive terminal and negative on the negative. Any help would be much appreciated. Thank you
Did you ever solve the issue? I’m having the same problem
Hey Mike,....I guess this methodology couldn't work on an AGM battery? How could a person "monitor" a boil? Any help would be greatly appreciated! Do you have a favorite or different inverter arc welder that you might recommend? And many thanks for sharing all your knowledge over the years.
It works only on lead acid batteries Marcob, we like this unit amzn.to/2K1UsWQ Hope this helps my friend, have a fantastic day and great weekend. mad Mike & team
Thanks Mike for throwing me under the bus! LMFAO
👍👍👍👍👍👍👍
Any time Kerry :) LOL Just looking out for your best interests my friend :) Thanks for the view buddy, have a sweeeeeet week. mad Mike
tried this yesterday on my 4 years old working battery with 450 CCA ( 525 new ). zap it a few times and it jump up to 528 lol. i havent retest it yet , gonna do it later this evening
Thanks for watching and sharing, have a great day my friend. mad Mike
Just bought one from online home Depot only $60 bucks! Thx Boss, 1i .)
How well did it work?
Hey so im having problems i followed step by step on the video only problem was i put too much water and is overflowing my breaker for some reason cant handle it even though its 20 amp. It shuts off after about a min. I dont know what i did wrong. Can someone help me find a solution
Hi Mike, will this Vevor stick welder 140 amp work for a car battery or does it need to be 200 amps? Thank you
Hello David, any of these will work my friend amzn.to/3L0yP5v ; You can go with the 180 AMP amzn.to/3OX5pqa or You can go with the 200 AMP amzn.to/3EjGjgd Thank you for watching and asking, hope you have a great day. mad Mike & team
Well I bought one but haven't had time to try it out yet and I've got a mower battery to do .
Nice! Thank you for the view and comment, have a fantastic week and all the best on your project my friend. mad Mike
Tried this with the car battery and got the bubbling immediately. However, using the exact same methods, I could NOT get either marine battery to bubble at all. I even cranked it using the 220 amp in my garage with no luck. Tried it 7 times now....5 min on and 10 min rest. Nothing more than 1.37 volts measured with the multimeter on the battery. Any idea why I can't get any bubbling?
if you are using the same tools we share here in this video and you have enough of this amzn.to/3S5VC2u in the battery it should boil I can pretty much guarantee if you crank the welder up high enough it will start to boil sometime it takes a minute to get going mad mike out
Solder your wire connections on the clamps too, they did a lousy job on my set ...
After using the welder do I still need to charge it with a battery charger or it's plug and start?
Just put it on this amzn.to/3kmCThX for at least 24 hours after doing the process shown, then you're good to go. Thanks for watching and asking, have a great day. mad Mike & team
@@SweetProjectCars I have this one battery where this specific cell won't bubble, I tried it couple of times even putting higher voltage but it still won't bubble, it's the only one out of the others that does that, even left it for a day but still..... Any recommendations?
So Mike, how about those pesky side mount terminals? The one that screw into the side.
As Hoolio would say, use el boltos in el holeios LOL Hope this helps Steve, thanks for watching, have a great week my friend. mad Mike & team
Heh, heh. Thanks to Hoolio. I just wanted to hear 😆him to say it. @@SweetProjectCars
Terrific video if you have the 200 amp stick welder, what settings are used as far as the amps with the dial
Start out low and slow, then gradually turn it up until you get a rapid boil on all of the cells. See this video th-cam.com/video/VYtkn-N_p4s/w-d-xo.html it's our original welder/battery video and has a lot of helpful information about this process. Thanks for watching, have a great week. mad Mike
Thanks will do
Would this welder work with a pickup truck battery as well?
Julio should have promoted the welder again.
Hoolio slips in and out of the shop when we're shooting videos, LOL, he does NOT want to get caught on the camera :) Thanks for watching, have a great week. mad Mike
Good tips, thanks for sharing, God bless !
Glad it was helpful Michael! Thanks for the view and comment, it's always appreciated my friend, have a blessed week. mad Mike & team
Do you ever repair gel batteries? And have you had any success?
This process can only be done on lead acid/wet style batteries my friend. Thanks for watching and asking, have a great week. mad Mike
@@SweetProjectCars you the man!! mad MIKE
I got the 140 unit. Whats the setting for an Atv battery ? I tried bringing it to 70 it boiled. Next round 30 it boiled and lots of smoke.. I even emptied some acid out after the first round.
It shouldn't smoke, u must have an bad cell
Do you ship to the UK
Unfortunately, we don't bigsy, customs is ridiculous to send even a tiny sample. We truly appreciate the view and you being here with us from the UK, thank you, hope you have a great week my friend. mad Mike & team
Yes sweet project cars can I get a sample of the world's most amazing lubricant.
Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at sweetprojectcars@gmail.com with your name and mailing address!!!
How do i get the free sample?
Congratulations!! You are a winner!! Click here tinyurl.com/bdf6a6ky to see what you have won!! You have 12 hours to e-mail us your address to receive your free sample!! If you would like the sample, E-mail us at sweetprojectcars@gmail.com with your name and mailing address!!!
If they are too stupid to not know how to make the connection they sure as hell dont need to be reconing batteries.
Is this one also good for deep cycle and golf cart batteries? Or should I go with the decopro for those?
This will work fine for the deep cells as well my friend
Awesome thanks!
Where's Julio?
Think he got a hold of the syringe and hypodermic needle full of goo gone from the last video…let’s hope he’s ok!
He's around James! LOL Thanks for the view, hope you have a great week. mad Mike & team
💪💪💪
Thanks for the view David, it's always a pleasure my friend, have a stupendous week! mad Mike & team
😊Ty Mike.
Absolutely Betty! It's our pleasure to help. Thank you for watching and sharing, hope you have a great week my friend. mad Mike
Make sure u dont uae a ac welder..
Just use the recommended tools in Hoolio's tools list and you are all set! Thanks. mad Mike
👍🏿👍👍🏽
Thank you for the view my friend, hope you have a great week. mad Mike