If anybody fancies a face lift Speedo dial and white LED upgrade conversion please get in touch. Also if you bought the repair kit and made a mess and have given up or broken needles and any where near London we can help. Can replace the motors if needed.
hello brother can you help me please i have rangr rover sport 2008 The wire was cut off from connector cluser can you give me circuit wiring So that I can return it to connector thank you
Acetone on q tip will clean those off easily. I just recently did this on my L322. Also do not remove the needles it will damage the motor. There are 4 holes which must be drilled out to gain access to the screws to remove the LCD without removing the needle.
Awesome Don't show the next step of removing the needles. Thanks.....
Great video, thank you. Bought my parts from AK Speedo. Great technical support. Thanks again.
If anybody fancies a face lift Speedo dial and white LED upgrade conversion please get in touch. Also if you bought the repair kit and made a mess and have given up or broken needles and any where near London we can help. Can replace the motors if needed.
How did you get the pointer off??
Hi what type of tape are you using
and do I need to remover the needles just to replace the lcd
hello brother
can you help me please
i have rangr rover sport 2008
The wire was cut off from connector cluser
can you give me circuit wiring
So that I can return it to connector
thank you
How did you get the gauge needles removed
Lee Boss th-cam.com/video/moZ0ctQxWNY/w-d-xo.html
Ranger rover sport 2009 ? I can
what about speedometer in Km and not in miles? is the ribbon the same?
Yes the same, cheers www.akspeedo.com/
Do you sell the lcd pixel for the 04 Range Rover HSE? Hi
Email us a picture of your speedometer: akspeedo@hotmail.co.uk
Please DON'T remove the pointer needles, without our needle removal kit! www.akspeedo.com/
Could have mentioned that at the start of the video !!!
What did you clean the contacts with?
Acetone on q tip will clean those off easily. I just recently did this on my L322. Also do not remove the needles it will damage the motor. There are 4 holes which must be drilled out to gain access to the screws to remove the LCD without removing the needle.