⛏️Bitaxe Setup Instructions⛏️

⛏️Bitaxe setup instruction video. ⛏️
🛒altairtech.io/...
Step by step instructions also listed below
1. Attach the display to Bitaxe PCB (skip this step if you purchased with AxeSheath)
2. Plug Bitaxe into the included 5V power supply. Please do not plug any non-approved 12V power since that will permanently damage the device.
3. Bitaxe will now attempt to connect to a default network, which it will not find. To configure the Bitaxe use a WiFi capable device such as a Phone or Laptop and search for the new WiFi Access point Bitaxe_XXXX.
4. Connect to the Bitaxe SSID and you should be prompted for or redirected to the AxeOS web portal. If this does not happen after you connect to the Bitaxe, open your browser and visit 192.168.4.1
5.When you see the AxeOS web portal click on the ‘settings’ button
6.Configure the WiFi SSID and password for your local WiFi network (Note:
Bitaxe is not compatible with 5Ghz Wifi, it only works with 2.4Ghz WiFi).
7.Double check your WiFi SSID name and password before entering, to prevent manual recovery later.
8.Update the pool URL, port and user to your preferred pool. We recommend ckpool or publicpool for solo mining.
9. Click Save, then click restart to apply the changes.
10. Done! If everything is configured correctly your bitaxe will start mining. You can re-visit and reconfigure the Bitaxe on your local network by visiting the IP address displayed on the device.
You can also press the ‘boot’ button on the device to enable the WiFi access point and connect to it directly at any time. Pressing the ‘boot’ button again will disable the access point.