The NEW Pride Mobility jazzy™ Carbon Travel Lite® Folding Power Wheelchair Review - PART 7

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ต.ค. 2024

ความคิดเห็น • 30

  • @dinavanderheyden9333
    @dinavanderheyden9333 6 หลายเดือนก่อน +2

    I just bought one of them I’m 93 years old. I hope I did the right thing I did take it out. Went over the railroad. Everything works. I have to get used to it yet. Wish me luck.

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  6 หลายเดือนก่อน

      That is awesome! no dukes of hazard jumps over the railroad tracks now!! 😁 Enjoy your new ride.

    • @michelb.8953
      @michelb.8953 3 หลายเดือนก่อน

      Did you know you can cut off the back up beeper noise? Just push and hold down the horn button at the same time you push and hold down the slow mode button. The horn button is top right, slow mode button is bottom left. Hold both buttons down at the same time until you hear a beep. That should cut off the back up beeper.
      If you want to turn the back up beeper back on, press the horn button at the same time you press down the fast mode button until you hear the beep and that will return the back up beeper. Horn button, top right and

  • @ArtStoneUS
    @ArtStoneUS 26 วันที่ผ่านมา

    I bought one in July of 2024 and I've been very happy with it. They made some slight modifications to the joystick control, but nothing terribly significant. The current version can disable the backup noise by holding the button down for 3 seconds.
    The chair will be significantly slower when you're riding it on carpet as opposed to outside on concrete or asphalt

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  24 วันที่ผ่านมา

      Yes, you are correct they changed the joystick to another version for some reason.

  • @joanhelgeson9118
    @joanhelgeson9118 6 หลายเดือนก่อน +1

    Thank you so much for this very thorough review! I am renting one for a week to see if I want one and your presentation was very informative and I learned a lot! Again, thanks!

  • @CynthiaHolmes-t6h
    @CynthiaHolmes-t6h ปีที่แล้ว

    I loved how detailed this video was, thank you! I as well would have liked to see it operate outside.

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว

      Glad you liked it! This was a customer's new scooter and I didn't want to get it to dirty. Thanks for watching.

  • @danielturner2603
    @danielturner2603 5 หลายเดือนก่อน

    On the jazzy carbon when the battery is charged does the charger shut itself off. I don't want to overcharge it

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  5 หลายเดือนก่อน

      Hi Daniel, I've tested SLA type batteries and charges and they do not switch off but haven't tested the theory on Lithium Ion. I suppose you could test this yourself if you have the equipment by plugging the charger into the charge port of the battery pack with the pack on the chair and place a multimeter reading DC volt into the joystick charge port left and right pin sockets to read the voltage (be careful not to let the two testers touch each other). Unplug the charger and see if the voltage reading goes down. If you do see a drop in voltage, then yes, the charger is still supplying a charge to the battery. Best rule of thumb when charging batteries is once it shows fully charged on the charger, remove the charger from the charge port and especially with lithium ion. You should never charge the battery unattended, and we also recommend not at night when you are sleeping just in case it does catch on fire. SLA batteries are ok overnight but no more than 14 hours, if they are still charging after that amount of time, it may be a bad battery, or the batteries are old and need replacing.

  • @elyo94
    @elyo94 ปีที่แล้ว

    i'm still looking if it is nvr2, vr2 or r-net module, that will be a big help

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว +1

      Here is the part number and description for the Jazzy Carbon controller:
      MEC2200186
      POWER MODULE M7084;JAZZY CARBON(INNUOVO:7084-SPWB-2)
      MSRP $944.00 😲

  • @bstar41421
    @bstar41421 5 หลายเดือนก่อน

    My elite e5 gives a flash code of 10 what does this mean

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  5 หลายเดือนก่อน

      I take it you mean a Jazzy Elite ES?
      10 flash code is over voltage.
      An excessive voltage has been applied to the control system.

  • @allondajackson6344
    @allondajackson6344 ปีที่แล้ว +1

    I think you should have taken the chair for a ride outside.

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว +2

      I would of if it wasn't already sold to a customer lol

    • @wincharles1195
      @wincharles1195 ปีที่แล้ว

      @@lasvegasscooterslifts I’m getting mine as a Christmas present I am in Arizona

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว +1

      Well Merry Christmas!! the best Christmas presents are the ones you buy yourself LOL. Hope it's not on backorder like the rest of 99% of the pride products smh

    • @wincharles1195
      @wincharles1195 ปีที่แล้ว +1

      @@lasvegasscooterslifts I actually took it off the showroom floor at the place where I got it, so no, I didn’t have to order it

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว

      Thats good, Enjoy your new ride :)

  • @rudyespanol7734
    @rudyespanol7734 ปีที่แล้ว

    Can’t understand this guy. All I heard is his breathing . ✌️

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว

      I was thinking I might have to put up subtitles.

    • @slowslug3247
      @slowslug3247 ปีที่แล้ว +1

      I actually really appreciated this review, it’s very thorough unlike others. As a disabled person myself I would never complain about someone’s breathing 🙄

    • @lasvegasscooterslifts
      @lasvegasscooterslifts  ปีที่แล้ว +1

      Breathing is a good thing right, 👍 It means I'm making constructive videos 😊 Thanks, SS