Bro any advise tuning a base lancer 2.0? I got definitions from US friends but just to know if you have it as well since were both in Asia? Also any advise what tables to tune? ty
You gotta connect the maf sensor to the throttle body. So that it senses that there's air passing through it and gives the maf sensor a reading for it to stay idle
Hye boss. Love to see this video. But just asking. Is this car really use original LANCER GTE engine to bolt on turbo? Or change engine to lancer GT engine?
@@NimaiN can the cvt handle the power.. how many hp and boost(kg) in this build? i dont know if its true, but somebody told my 4b11 and 4b11t are very diferent and 4b11 cant recive crank, or evo forged pistons. i would love to instal a turbo and graduali forge the engine while i up the boost. but without the forged parts would be impossible.
@@timour470 Until it breaks basically, 4b11 can have a 4b11t crank it is not that different. The main issue for more than 250hp is basically the cvt, you will need to make a manual swap or use boost until it breaks haha
You have to custom out a hole at the oil pan. Somewhere at the highest point of the oil pan, and somewhere when the oil surge, it doesn't cover the hole for the oil to return into the oil pan.
Definitely daily friendly. Easy to drive. So far no problem on them. But if you drive it hard every single second, then ofcourse you will prone to have some issues. Applies on every other engines as well 😂
great video. good quality and a lot of information
Thanks man!
Finaly a good video about this great video 💪💪
Thanks man!
Finally found good videos on this! THX
No problem ma guy!
everything you guys are doing is literally everything i want to do to my Lancer
You can do it buddy!
Good luck guys 💪🏾💪🏾💪🏾
Thank you!
Bro any advise tuning a base lancer 2.0? I got definitions from US friends but just to know if you have it as well since were both in Asia? Also any advise what tables to tune? ty
is it true the 2008-09 ecu manual ones you dont need to buy another ecu and use ones they have ?
Do you have the links for that oil feed and return line?
This guy can turbocharged any lancer via zoom
About to 5 speed swap and install a RA kit on a ASX 🤘
Красавцы парни💪, у меня тоже sportback 2.4 ( 200hp ) 2 wd. Short mt transition fm Outlander
thanks for this video.
How does a turbocharged Lancer with a CVT feel?
Double the power! And you're welcome.
I am from Brasil and i have a Lancet Gt i will make this whith my car i love this videos.
Go for it man! Good stuff. Thanks for loving the video!
Niceeee bro...
Thank you ma friend!
Need help asap, newly turbod lancer also but as soon as i start it it just dies right after i need help
You gotta connect the maf sensor to the throttle body. So that it senses that there's air passing through it and gives the maf sensor a reading for it to stay idle
just subscribed to the chanel. how you onlt have 821 subs? videos are great!!! thanks for ansering my questions.
Thanks for the love man! If you have any problems with your bolt on next time, you can ask me anytime! I'll be gladly to answer them.
Hye boss. Love to see this video. But just asking. Is this car really use original LANCER GTE engine to bolt on turbo? Or change engine to lancer GT engine?
Yes boss. Using 4B11 from gte and bolt on. Not from lancer GT
Gt and gte same engine
mantopp
Terima kasih bosss
part 2 plsss
hmm just curious, would this work on .. an Outlander 2.0 4B11?
For sure my bro.
i heard that bolt on turbo to your Lancer with auto cvt will destroys ur gearbox in long run?
As long you don't launch it from start and make sure your atf cooler is good. It'll be fine
Fuyoo... DJ liang bot
Yeeeboii
do you know if this is the same with the lancer cvt version ? i swap mine to manual but i dont know in the engine can take evo parts, like crank
Yes this is the same with lancer cvt version. This is a lancer gte with cvt gearbox. Not too sure about the crank thou
@@NimaiN can the cvt handle the power.. how many hp and boost(kg) in this build? i dont know if its true, but somebody told my 4b11 and 4b11t are very diferent and 4b11 cant recive crank, or evo forged pistons. i would love to instal a turbo and graduali forge the engine while i up the boost. but without the forged parts would be impossible.
@@timour470 Until it breaks basically, 4b11 can have a 4b11t crank it is not that different. The main issue for more than 250hp is basically the cvt, you will need to make a manual swap or use boost until it breaks haha
@@timour470 th-cam.com/video/7qCVKYCbB14/w-d-xo.html
This one has crank, rods and pistons of evo
Is inspira is good for student ? Might have one nextyear
It's good for everyone! Even students but turbocharging it might be not a good idea yet. Until you are ready to manage it.
How to do the oil lines from the turbo?
You have to custom out a hole at the oil pan. Somewhere at the highest point of the oil pan, and somewhere when the oil surge, it doesn't cover the hole for the oil to return into the oil pan.
Geee Teee Eeer
💥💥💥💥✌️✌️✌️✌️✌️
Thanks dudes i want to do these on my lancer but I don't understand if you talk in another language haha
Sorry man! But it's nothing much on when I talk on other language
What's the typical HP output on a setup like this ?
This would be on the Low 200s
Not too bad. Thanks for the info brooo
@@jarodlam1716 Yes! Basically around double the power! No problemo ma mann!
how much it cost in total? will it work with a 2.0L one
This is a 2.0L model. The 4B11 NA engine
The total cost of the item it depends where you're from. Which country you're in?
Do you recommend bolt on for daily drive?
Definitely daily friendly. Easy to drive. So far no problem on them. But if you drive it hard every single second, then ofcourse you will prone to have some issues. Applies on every other engines as well 😂
@@NimaiN what about the gas/fuel?
@@vichope6408 over here in Malaysia, we are only using pump gas which is Ron95
I have a lancer with 190k miles. Do you think it will hold boost?
As long your engine is healthy, it will hold boost well. And ofcourse it has to the at the right boost psi.
@@NimaiN I’m gonna do a compression test soon… I’ve been very careful with maintenance.
@@Blakethegoat Your engine should do fine ! Hope all is well for you.
@@NimaiN do you need an aftermarket ECU? Or can I tune my stock one? Thanks buddy love your videos…
@@Blakethegoat Thanks man! You'll need either an Evo X or Lancer Ralliart ECU. I explained the details on them at 9:09
can this setup fit for my lancer ex 2.0 gt?
Yes it can
@@NimaiN and sst gearbox is fit for 4b11 ( ex 2.0 )? or need to up 4b11t ( evo x )
@@iFocusET sst for 4b11t only
what the size copper size bro...
It's 8mm if not mistaken
Bro! I have some questions! Where can I hit you up?
Wassup man! Can hit me up on my Instagram! At @nimaingumbang
How much do you charge to do it?
I only did it for fun. Not for business purposes 😂
how many days take time to bolt on
I took us roughly 4 full nights. Didn't do it during the day
@@NimaiN bos what size turbo return line ...can share link
mana jumpa turbo kit bos?
Ni dari fb bosskuu
How much does it cost?
I'm not to sure on this. You can dm the owner on Instagram. His id is @brighton_1205
bro u ada tukar head ka after tune?
Masih ori head bro
Boss bila part 2?😭
Hahah sabarrr. Nanti dia keluar
@@NimaiN hehe ok boss sya pn pakai lancer gte nak tgk result dia🤣
@@arnoldsteven4030 uish tu kalau bolt on. Sedappp. Hahah. Nanti part 2 keluar tak lama lagi.
Omg can I bring my lancer gts to turbo mine teach me 😪😪😪🥵
Hahah it's a lot to teach!
Come to Fiji man😭
Mannn! You're so far away
Will the 4b11 be alright for cruising with all this until I get a tune? Cvt CJ
Can drive slowly. Can't boost the car yet until the ecu is changed with a base map at least. The NA map sensor can't read high reading.
@@NimaiN how was the MAF sensor & intake side done in this video?
dini projek mai
Ba rumah aku tu 😂😂😂
Be careful btw
Always careful!
그냥 팔고 에보x 사는게 더 효율적이지 않음?
Evo x는 여기에서 매우 비쌉니다.
Nimai..my jz idol
My 4B11T idol
@@NimaiN hahaha..Mine only NA..no T..no stu stu stu 🤣🤣🤣
@@Ray.939 eboteng
@@NimaiN hanya mmpu mengidam
Ralliart has the same engine, but single scroll turbo and only comes in SST gearbox hehe
Means Turbo difference only! I see. Thanks for the info!
S̷͚͕͊̆̄͐̿̇̋͘͠͝ͅe̴̺̘̮͕̺̗͋́̈̀̿̀́̀́̚t̷͕̪͍̰̽͐̑̈͠ͅt̸̡͉͈͓͓͍̪̭̞͐̅̑́l̴͍̅ȇ̷̙͕̥̈̃̆͂͒̆͋́͝ ̷̮̪͍̘͓̩̘̏̄̀̽̄̀́͆̂͠i̷̢̞̣̥͑͆ṅ̶̡̗̭͓͋̎̌̈́́͂̀̉ ̵̛͉͉̻̙͛͆͐͘̕ͅ
''How to Bolt On Turbo?'' Use a wrench and alot of swearwords.
ay bro do u got instagram or something?? i have questions