Watching in Port Moresby city, Papua New Guinea. Very impressive. Currently embracing on solar sizing of small off-grid solar power systems for clients. Vital information from your lectures. Thank you for sharing the knowledge. God bless
I am of a different opinion please. Depth of discharge for instance let us assume 70% as specified by the manufacturer should be used in the final stage of battery sizing i.e 70% tells us that, after you've obtained your calculation as 168.125Ah, add 70% of 168.125Ah. I mean 168.125+117.6875=385.813Ah. This is approximately 400Ah capacity battery. So you go for 400Ah battery not 200Ah.... Again, you ought to have considered the effects of temperature on the battery(as specified by the manufacturer) as well as efficiency of charging and discharging (as specified) and used them in your calculation
@@Le_vis254 That's what i was going to point out... For me this sizing process is incomplete. In the intro he started talking about days of autonomy...then that was not taken into consideration in the final result....Battery efficiency as well wasn't taken into consideration...hope there's a third video coming up
@@wenzydemar4406 Of course yes, I think he'll upload a new video to correct the slight mistakes made.. He's a great teacher and one of the best interms of explanation
Great teaching, just a question. How do you calculate the DOD for the batteries? Where is 50% dod, 70% DOD coming from? Is it from the manufacturer? Is it already set in the Charge controller? I would appreciate your response.
Question How does an inverter and solar charge controller synchronize to properly regulate charging current from both the grid and external solar charge controller going into one battery bank? I really need help
Thank you very much for the knowledge shared. Can we interpret that 200ah battery with 24v inverter could run for a day if the load is within 2600whr? Also, is it adequate to rely on the information around equipment to ascertain energy consumption of the equipment, or is there any other way of getting this info?
You can check the equipment to see the power rating or daily energy consumption. You can also use an energy meter to know the energy consumption of the electrical equipment
Thank you so much I newly subscribed to your channel My queation here is , After all the calculation you got 24volts/200ah battery .so how many of it (the battery) will give or serve the Energy demand of 2,542whr.??
2 units of 200AH connected in series gives 200AH/24v to give you the whr calculated in the video. The battery bank will supply the reactive power and power losses in the inverter and also considering 50% battery usage, which is enough to supply the whr calculated in the example.
You teach very well , but I think you have to review your teaching very well Because am in a doubt that 200AH batteries cannot accommodate such load . Another thing is that you did not consider the battery efficiency and also the materials like cables loses as well For me all you have to do is to divide the t.d.p.c by 12 which is the single battery voltage you can see, then what ever it gives you is your total Batery AH then you divide it by the amp rating of your individual battery to get how manny number of battery required
Awesome Training Section 🥰🙏
Watching in Port Moresby city, Papua New Guinea. Very impressive. Currently embracing on solar sizing of small off-grid solar power systems for clients. Vital information from your lectures. Thank you for sharing the knowledge. God bless
You explain good am from Tanzania🇹🇿
Thank you sir very good achievement from Katsina state
Thanks
Your analysis is great 👍
I'm from Abuja Nigeria
Please talk more about how to do the electrical connection of the appliances the client want to use
Alright! I will by God's grace. Thanks for your suggestions
Good work, but you did not mention the days of autonomy in your steps. Is to divide or multiply by the T.D.E.C
I would assume that it should be multiple because if the total energy consumption for one day is 2542wh then two days would be 2542*2 = 5084wh
Well explained...👏👏👏
I am of a different opinion please. Depth of discharge for instance let us assume 70% as specified by the manufacturer should be used in the final stage of battery sizing i.e 70% tells us that, after you've obtained your calculation as 168.125Ah, add 70% of 168.125Ah. I mean 168.125+117.6875=385.813Ah. This is approximately 400Ah capacity battery. So you go for 400Ah battery not 200Ah.... Again, you ought to have considered the effects of temperature on the battery(as specified by the manufacturer) as well as efficiency of charging and discharging (as specified) and used them in your calculation
??
@@Solarwattng what do you mean?
@@Le_vis254
That's what i was going to point out... For me this sizing process is incomplete. In the intro he started talking about days of autonomy...then that was not taken into consideration in the final result....Battery efficiency as well wasn't taken into consideration...hope there's a third video coming up
@@wenzydemar4406 Of course yes, I think he'll upload a new video to correct the slight mistakes made.. He's a great teacher and one of the best interms of explanation
@@wenzydemar4406
Pls sir i think you can help add the calculation omitted as u have said above .
I will be glad if you do for me .
Thanks
You are good
I like the way you lecture sir
Glad to hear that
watching from Minna. Thank you for the technical details. How do we determine inverter efficiency and lost factor for DC to AC conversion?
Thanks you #Boss, God bless you for the infor
Thanks
Thankyou sir
👍
Proud of you! You make a good teacher.
Great teaching, just a question. How do you calculate the DOD for the batteries? Where is 50% dod, 70% DOD coming from? Is it from the manufacturer? Is it already set in the Charge controller? I would appreciate your response.
you basically have to decide the DOD that is suitable for you based on the number of cycles you want your battery to do during it's life span
Question
How does an inverter and solar charge controller synchronize to properly regulate charging current from both the grid and external solar charge controller going into one battery bank?
I really need help
What is the DOD of lithium battery
Good evening boss... I'm watching you from Lagos..
Thank you for your great knowledge 🙏
Thank brother, I'm Jeremie Gbadyu , watching from Liberia 🇱🇷
Thanks for watching
My God will bless u, am learning alot❤❤❤
Amen... Thanks 🙏🙏
Very educative
🙏
Please give your number 🙏🏻 @@Solarwattng
How about "days of autonomy"?
Another accurate calculation. Well done!
Thanks
Thank you boss
I really appreciate it sir
Thanks for your lecture. I have a 500wts /SAA500A inverter. What is the number of panels of 100wts can be used for 2x12v 75Ah. Thankyou once more
Am watching from Tanzania
👍
Watch from kaduna
🙏
very detailed explanations. keep up the good work
Thanks... I'm grateful
Many thanks!
Praise the Lord!
New York!
I am happy to listened to your video. Great job. Watching from Ikorodu Lagos
wow! Thanks 🙏
Great
Thank you very much for the knowledge shared.
Can we interpret that 200ah battery with 24v inverter could run for a day if the load is within 2600whr?
Also, is it adequate to rely on the information around equipment to ascertain energy consumption of the equipment, or is there any other way of getting this info?
You can check the equipment to see the power rating or daily energy consumption. You can also use an energy meter to know the energy consumption of the electrical equipment
Can't find the video on Load analysis table
Thanks Bro, very helpfull these tutorials, watching you from China
We didn't use the autonomy. what if it is two days?
Thanks brother but let's assume we're using dc only in the system, how can we size the battery bank without inverter efficiency?
just don't divide it by the 0.9. (rather by 1) since there arent any losses
How do you find your total daily energy consumption
Say my days of autonomy are 2, how do I include it in the calculation?
Multiply your AH value by the days of autonomy, for instance since his days of autonomy is 1 the Ah value remain same
i understand now . thank you am from South Africa
Thanks
Am New into solar system, I wish to know more
Please how would you know the inverter efficiency
Check the manufacturer manual or specification sheet
Am watching from Cameroon
Thanks for watching
Is the battery lithium / lead acid
Can the Growatt SPF 5000 ES charge a 15kwh battery with a 4950 watt panel?
Yes it can.
It would take 3-4hrs depending on your DOD
that is great to know. meaning i dont have to increase the solar arrray yet until i increase the inverter size...@@peterakoh3432
Thank you sir for good teaching. Sir is there 24v battery of 200Ah?
You will connect 2 units of 200AH/12v battery in series to get 200AH/24v battery bank
@@michaelakomolafe9249why was 24 volts considered instead of 12volts on the nominal system voltage in the final calculation?
Thank you so much
I newly subscribed to your channel
My queation here is , After all the calculation you got 24volts/200ah battery .so how many of it (the battery) will give or serve the Energy demand of 2,542whr.??
2 units of 200AH connected in series gives 200AH/24v to give you the whr calculated in the video. The battery bank will supply the reactive power and power losses in the inverter and also considering 50% battery usage, which is enough to supply the whr calculated in the example.
Beautiful as expected.
Thanks
How will i know the inverter efficiency?
Check the specification sheet of the inverter
Teaching good my brother. Watching u from india Rajasthan Jaipur
Thanks and welcome
Thanks
Thanks for sharing this information... God bless you!
Amen... Thanks
Thanks I am in Mogadishu Somalia .is thre cleaning in telegram about solar system
sir I'm kenneth from adamawa Nigeria can you help us with the hand out?
Thank you!
HI, I am watching from Curacao.
From Abuja. I need the pdf
Good morning brother I am watching you form Liberia
thank you
Thanks
Welcome
From Sierra Leone
@@MohamedBaimbaConteh 🙏
Please continue this teaching series
Good but i don't see the name of your channel or acount like if i want to i must goole with name
You teach very well , but I think you have to review your teaching very well
Because am in a doubt that 200AH batteries cannot accommodate such load .
Another thing is that you did not consider the battery efficiency and also the materials like cables loses as well
For me all you have to do is to divide the t.d.p.c by 12 which is the single battery voltage you can see, then what ever it gives you is your total Batery AH then you divide it by the amp rating of your individual battery to get how manny number of battery required
Keep it up, man!!!
Thanks
Another question is let's assume the days of autonomy is more that one day
What a superb explanation. Kudos 👏. Can i get your contact pls sir.
Thanks... 0810 878 1450
You forget the day of autonomy and the battery temperature.
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤
Thanks
In this lesson, u didn't take days of autonomy into consideration in ur calculations
He clearly did at the earlier half of the video, where he said for this calculation he'll use just 1 day of autonomy
Your contact please!
Sir can i have your number i have an important question to ask
I love your video and am learning alot from you sir.... please how can I be in touch with you on whatsapp sir
Thanks very much... 0810 878 1450
Your contact
+2340905 345 3640
Great
Thanks