I have the same issue. Water got between the battery and the module. I think this created some kind of a short and destroyed one of the parts. No liquid inside the case either.
My One R's door for the charging port and SD card no longer holds. This is due to where one of the "slits" on the core frame, that the door goes into, has broken. Do you know if the housing of the "core", the side with the SD card and charging port, can be replaced/bought separately?
Yes, you could try. It's just that there would be too many exposed areas (fpc, connectors), the case somehow also has a cooling role for the processor. It would be a little risky but not impossible.
salt water entered me from the usb c port door, I sprayed everything with wd 40 and left it to dry in rice, no signs of life, was I wrong? I am not able to disassemble it like in the video.
Depending on how long it was in seawater and depending on how you proceeded after you recovered it, it could be more or less repairable. The most important thing is to remove the battery immediately. After that, it should be rinsed with clean water to avoid corrosion of the connectors. If you follow the steps in the video and manage to disassemble it, you can try to clean the internal components with isopropyl alcohol. If it has been in salt water for a long time or you continued to use it afterward, there is a good chance that some components will be irreparably damaged.
Hi, Please help me tht my insta 360 is showing, connection lost with the lense module, please restart, But no luck of re-start, many are facing this issue. I think because of the port get loss by time attaching or ditching
Unfortunately, I did not encounter this defect. This defect can occur for many reasons. The simplest would be to try to clean the connectors with isopropyl alcohol.
![PASULOL รามเกียรติ์ ตอนที่ 4 นนทกพบรัก [Ramakien Ep.4: Nonthok in love]](http://i.ytimg.com/vi/tMUQgmZzf_A/mqdefault.jpg)
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Thanks for the video, my 4k module has the male connector damaged, do you know the ref for this part?
Great video!
Thank you!
Wow, the Patience of a saint, I think my one R now has water damage, no red battery/power light.
Mine too
@@motosardoMine did come back to life after leaving it for a few weeks, but have since gone onto a X3 and just recently an X4
I have the same issue. Water got between the battery and the module. I think this created some kind of a short and destroyed one of the parts. No liquid inside the case either.
My One R's door for the charging port and SD card no longer holds. This is due to where one of the "slits" on the core frame, that the door goes into, has broken.
Do you know if the housing of the "core", the side with the SD card and charging port, can be replaced/bought separately?
GREAT VIDEO. Where can I get a new touch screen for the one rs
I think you can only buy it from someone who disassembles such video cameras or you can buy a defective one and change the display yourself.
I have One R, and water has entered through charging port. Can you repair it.
Man i think i can totally break this into an cam for my fpv by decasing this part
Yes, you could try. It's just that there would be too many exposed areas (fpc, connectors), the case somehow also has a cooling role for the processor. It would be a little risky but not impossible.
hi, do you have a teardown video of the insta 360 flow please? I cannot find a video anywhere
on how to open the insta 360 flow
Unfortunately, I don't have this type of camera.
I need a help from uh bro
I need you help pleaseeeee!
I have SMO.4k
Led Blue solid
After update
Please helpme
Yo. Could that camera module's ribbon cable fit a raspberry pi?
Unfortunately, I don't know if it fits.
What kind of glue did you use to seal it back? Will ti be waterproof again?
I didn't use a special glue to make it waterproof again. There are special solutions for this (epoxy, silicone, acrylic).
sadly i dont have any spares. if you are from europe i could send you mine if youd like to take a look (ill pay you ofc)
salt water entered me from the usb c port door, I sprayed everything with wd 40 and left it to dry in rice, no signs of life, was I wrong? I am not able to disassemble it like in the video.
Isopropyl alcohol should be used for cleaning, not WD40. Unfortunately, until you disassemble the camera, you can't do much.
Can u help my insta360 repair cuz I on but is not on anymore 😢
My insta360 twin edition core got water damage,can u service it
I'm sorry, I don't have enough spare parts for this type of camera and I don't want you to send it if I can't assure you that I can fix it.
I have same model and its showing same issue after dropped in sea water.
Depending on how long it was in seawater and depending on how you proceeded after you recovered it, it could be more or less repairable. The most important thing is to remove the battery immediately. After that, it should be rinsed with clean water to avoid corrosion of the connectors. If you follow the steps in the video and manage to disassemble it, you can try to clean the internal components with isopropyl alcohol. If it has been in salt water for a long time or you continued to use it afterward, there is a good chance that some components will be irreparably damaged.
Hi,
Please help me tht my insta 360 is showing, connection lost with the lense module, please restart,
But no luck of re-start, many are facing this issue. I think because of the port get loss by time attaching or ditching
Unfortunately, I did not encounter this defect. This defect can occur for many reasons. The simplest would be to try to clean the connectors with isopropyl alcohol.