R2(config)# interface loopback 1 R2(config-if)# ip ospf network point-to-point R2(config-if)# exit R2(config)# router ospf 56 R2(config-router)# passive-interface loopback 1 R2(config-router) auto-cost reference-bandwidth 1000 set the same reference bandwidth for R1 set the dead interval along with the hello interval for both routers! it's not shown in the video. R2(config)# interface g0/0/1 R2(config-if)# ip ospf hello-interval 30 R2(config-if)# ip ospf dead-interval 120 do the same for R1 Save your configuration (Ctrl + S) Close and re-open PacketTracer It showed for me after that.
Hello. You are doing great job guys. I cannot find a "2.7.2-packet-tracer---configure-single-area-ospfv2---physical-mode" activity anywhere. You have done the 2.7.2 lab, have you decided to skip this activity? Thank you.
![[[OFFICIAL MV]] เอิ้นขวัญให้อ้าย- อ๊ะอาย สกุณาพร | ค่ายเพลงเป็นหนึ่ง](http://i.ytimg.com/vi/83x6L3X3qh0/mqdefault.jpg)
The show ip route ospf on ROuter 2 till doesn't work for me even after closing packet tracer
R2(config)# interface loopback 1
R2(config-if)# ip ospf network point-to-point
R2(config-if)# exit
R2(config)# router ospf 56
R2(config-router)# passive-interface loopback 1
R2(config-router) auto-cost reference-bandwidth 1000
set the same reference bandwidth for R1
set the dead interval along with the hello interval for both routers! it's not shown in the video.
R2(config)# interface g0/0/1
R2(config-if)# ip ospf hello-interval 30
R2(config-if)# ip ospf dead-interval 120
do the same for R1
Save your configuration (Ctrl + S)
Close and re-open PacketTracer
It showed for me after that.
Hello. You are doing great job guys. I cannot find a "2.7.2-packet-tracer---configure-single-area-ospfv2---physical-mode" activity anywhere. You have done the 2.7.2 lab, have you decided to skip this activity? Thank you.
We will upload all the physical mode activities soon! Stay connected!
And thanks for your great support and sharing my dear friend!
@@kellydeguzman9665 honestly a dumb question. Need configuration information to be able to tell what's wrong
Thank you
Glad it helped!
Thank you very much.
Welcome 😊
And thank you so much for your great support and sharing!
😍💭👀thanks
Great supporter ever.
Thank you so much...!
thanks
where can I get a downloadable PDF for
CCNAv7 - Enterprise Networking, Security, and Automation?
hi, I'm looking the same pdf did u get it if yes where?
what a boss
Glad you like it!
On mine it has R1 as the DR, what did i do wrong?
Try to save and re open the packet tracer. Then verify it!
Thanks for your great support and sharing!
35:13 checkpoint
Why do my router want a password
Security reason!
where can I get a downloadable PDF for
CCNAv7 - Enterprise Networking, Security, and Automation?
Thanks
Welcome