I was wondering, is there a practical use case for using a CNC machine to draw for you vs using a printer? I guess a solid alternate to a printer especially if your printer ink runs out
Pen plotters are a thing - main use decorative or aesthetic reasons. I guess if you want to draw on something that can't bend through a printer. Most plotters can also be used with a cutting knife, so making vinyl stencils is one use.
Nice machine indeed! As one who has just bought the manual and plans I wonder if there is a forum of sort where the design can be discussed? As I am looking into possibly scaling it up slightly I have some outside of the box ideas how to stiffen it up. And general discussions about the design too. Private Messenger chat, Discord, forum function in wordpress, etc???
Thanks for getting the manual Kristian - I'll raise this question with my patreons and try find a good platform. I may be able to create something on my website, or I'm guessing reddit might be easier?
@@EducatingSavvas I would think Discord would be the easiest. Just create a channel and we are go. However, just choose what seems the best option for you and patreons and I will follow.
Hi, nice form factor! I am about to build the openbuilds c-beam cnc machine (8mm lead screw and v-slot wheels) in a smaller formfactor (45x45cm machine footprint). I saw you build one - do you recommend it? I want it mainly for wood work but also for some custom made aluminum parts. The work area will be about 20x25cm. Planing to hook up 1.5kw spindle.
Hiya - thanks for the comments. I found over time ballscrew and linear rails out performed other belts, leadscrews and plastic wheels. V wheels are great for 3D printers but the forces involve in CNC routing need more rigidity. I sell plans on my website with a full parts list and step by step guide including calibration. I'm obviously biases but I'd recommend reading that first before making a decision. Good luck with your projects.
@@skaman82 The foot print is roughly 650mm deep (Y axis), 700mm wide, (X Axis) 700mm tall (Z Axis). The wasteboard size is 450mm wide (X Axis) by 350mm (Y Axis) although the spindle does overhang the front that so longer pieces can be cut. The Z cutting capacity, between the under wasteboard to base of Z axis is a little under 90mm.
The CNC machine I think was 600-700£ plus extra for electronics. Generally I suggest keeping a grand to one side for CNC building but could easily go up.
Hi Savvas, do you know what grade the linear rails you ordered are? I'm currently comparing robotdigg to banggood. Robotdigg have the orginal Hiwin, a stainless steel 440C version, and the cheapest (chinese copy) GCR15. Banggood doesn't state which ones they stock but I'm assuming it's the GCR15. Any comments on this?
@@EducatingSavvas cheers Savvas. it's painful getting info on the robotdigg site as the details are strewn all over the place in individual listings and the language barrier in the descriptions leads to some confusion ("and" vs "or" in particular). other than being better suited to wetter climates it looks like the 440C might be made to a tighter tolerance but they haven't listed an actual comparison to the GCR15. hard to gauge whether it's worth the approx 40% more in cost.
They are gcr15 - I think if you go with those and perform regular maintenance you won't notice anything noticeable for general tasks. But the more expensive ones are better.
I started with GRBL controllers but now use the Duet 2 Wifi - but the CNC can be used with any number of controllers and platforms. It's best to do your own research in that respect.
The price will vary depending where you source part and what quality you want to work towards - but you could easily build this for under a grand. The cost can also be broken down into stages if you follow the plan so you don't have to buy all the parts in one go. Once I start back at the studio I'll also make kits up for the machine screws so it'll be a bit easier to get going.
So cool seeing your machine draw itself. Very impressive.
I love the TRON reference drawn on the spindle!
Nice job.
Nice Job 👍🏼
what a funny idea. I love it. Good work :)
Awesome to see this completed. Great job👍
It's a bleeding miracle!
I was wondering, is there a practical use case for using a CNC machine to draw for you vs using a printer? I guess a solid alternate to a printer especially if your printer ink runs out
Pen plotters are a thing - main use decorative or aesthetic reasons. I guess if you want to draw on something that can't bend through a printer. Most plotters can also be used with a cutting knife, so making vinyl stencils is one use.
Nice machine indeed! As one who has just bought the manual and plans I wonder if there is a forum of sort where the design can be discussed? As I am looking into possibly scaling it up slightly I have some outside of the box ideas how to stiffen it up. And general discussions about the design too. Private Messenger chat, Discord, forum function in wordpress, etc???
Thanks for getting the manual Kristian - I'll raise this question with my patreons and try find a good platform. I may be able to create something on my website, or I'm guessing reddit might be easier?
@@EducatingSavvas I would think Discord would be the easiest. Just create a channel and we are go.
However, just choose what seems the best option for you and patreons and I will follow.
Hi, nice form factor! I am about to build the openbuilds c-beam cnc machine (8mm lead screw and v-slot wheels) in a smaller formfactor (45x45cm machine footprint). I saw you build one - do you recommend it? I want it mainly for wood work but also for some custom made aluminum parts. The work area will be about 20x25cm. Planing to hook up 1.5kw spindle.
Hiya - thanks for the comments. I found over time ballscrew and linear rails out performed other belts, leadscrews and plastic wheels. V wheels are great for 3D printers but the forces involve in CNC routing need more rigidity. I sell plans on my website with a full parts list and step by step guide including calibration. I'm obviously biases but I'd recommend reading that first before making a decision. Good luck with your projects.
@@EducatingSavvas thanks, I will do that. What is the footprint of the Moot ONE?
@@skaman82 The foot print is roughly 650mm deep (Y axis), 700mm wide, (X Axis) 700mm tall (Z Axis). The wasteboard size is 450mm wide (X Axis) by 350mm (Y Axis) although the spindle does overhang the front that so longer pieces can be cut. The Z cutting capacity, between the under wasteboard to base of Z axis is a little under 90mm.
Very nice and nerdy 😅
What’s the total cost for the entire build?
The CNC machine I think was 600-700£ plus extra for electronics. Generally I suggest keeping a grand to one side for CNC building but could easily go up.
Good work, excellent explanations. Is the 3d model for the drawing tool available on thingiverse.com? Thank you!
You've reminded me that I never finished sharing that. I'll try get a video out soon with an updated version of the 3D model - which I've lost. :?
Hi Savvas, do you know what grade the linear rails you ordered are? I'm currently comparing robotdigg to banggood. Robotdigg have the orginal Hiwin, a stainless steel 440C version, and the cheapest (chinese copy) GCR15. Banggood doesn't state which ones they stock but I'm assuming it's the GCR15. Any comments on this?
Hiya I'm not actually sure. I've just emailed my contact where I bought from - a supplier on AliExpress, and will let you know when they confirm.
@@EducatingSavvas cheers Savvas. it's painful getting info on the robotdigg site as the details are strewn all over the place in individual listings and the language barrier in the descriptions leads to some confusion ("and" vs "or" in particular). other than being better suited to wetter climates it looks like the 440C might be made to a tighter tolerance but they haven't listed an actual comparison to the GCR15. hard to gauge whether it's worth the approx 40% more in cost.
They are gcr15 - I think if you go with those and perform regular maintenance you won't notice anything noticeable for general tasks. But the more expensive ones are better.
@@EducatingSavvas thanks for confirming
Nice work.
how long does it take to make a machine like this?
What electronics do you use to control the CNC you designed??
I started with GRBL controllers but now use the Duet 2 Wifi - but the CNC can be used with any number of controllers and platforms. It's best to do your own research in that respect.
Hi Savvas, I'd be interested to know how much it costs in total to build one of these, including motors, control electronics, etc.
The price will vary depending where you source part and what quality you want to work towards - but you could easily build this for under a grand. The cost can also be broken down into stages if you follow the plan so you don't have to buy all the parts in one go. Once I start back at the studio I'll also make kits up for the machine screws so it'll be a bit easier to get going.
Is the price for the plans the same for patrons or is it only patrons who can see your videos on the CNC?
Patreons did got 50% off when it was first released but that offer has now passed.