it's fake. reasons: the USB cable does not have the standard coloring (not that important, just a sketchy USB cable), but, the 4 wires in a USB cable are power (+), power (-), data (+) and data (-). there are 4 data lines on the SD card... pins 1, 2, 7 and 8. also, did you think that you could power a 3.3v SD card with 5v? 2:37 looks like a solder bridge between two pins. 2:47 cut between when he plugged it in and when the drive was supposedly detected. he never showed the bottom of the SD card before he started "shouldering" it, and when he was (and before plugging it in) he never showed the top. one more thing, the way the SD card transfers data is not the same as USB (Universal *Serial* Bus). what is the shit in the description that says "be careful because it is only for corrupt memory card."
The SDCards work at 3.3V, putting 5V will heat up and destroy your SD Card... Also, the SD uses SPI interface (readable with a timer) but not on a serial bus
Is there a way or would it be possible to convert a USB key into micro sd card slot? I'm thinking of plug and play memory for a tablet which only has a micro sd card slot
@Vegan Pete is a micro sd card reader possible? The tablet in question doesn't have a USB OR a SD card slot, only a micro sd slot much like a phone. I believe the only solution is just a huge Micro SD card but I was interested in would it be possible?
@Vegan Pete I have a 3d printer, and my idea was to adapt a female usb connector to the micro usb on the printer's motherboard, so that it reads usb flash drive, but I see that it won't work, right?
Fifty bucks says this is the same guy from Microsoft Support that calls you to tell you you have a virus and it can only be removed by purchasing a gift card.
This is fake When mc insert in card reader this points already connected the computer is not any message show and you connect this points mc is working ☹. What's the matter tell me about this
Instead of soldering on a fragile SD card why not do the soldering on an SD card holder and then insert the SD card into the holder..you can also test malt. SD cards without any more soldering or desoldering?
When soldering, do it the correct way. Use iron to heat up wire and connector in place. Add some solder Allow some time for the solder to flow and fill the void between the wire and the connector Remove the iron and wait for the solder to solidify. Don't move anything, The completed joint should look smooth and a little shiny.
first micro SD needs 3.3v data level and to communicate with SD card you need to use spi protocol that actually uses clock , data in , data out and chip select to achieve this you gonna need a chip between the USB and the SD card the convert between both devices so if you want to destroy your card just do like what he did here
There are good number of apps on Google play to recover data from a corrupt SD card. The one I use works howerver there is a problem as it recovers data from the tablet it's self and the SD card so if you only have 20 GB on your device and the SD card is 30GB then there's nowhere to store the recovered data.
Just use card reader otherwise your card will be destroyed permanently. If nothing important on sd card you can just experiment it.Software also needed on pc to recover corrupted data just like easeus,minitool etc.
vijay garg han bhi ma na kia ha 32 gb ka upar sala fake video banata ha kharab ho gaya memory card computer ma dal raha tha data sab khatam ho gaya fakeeeeeeeeeeeeeeeeesew i. Report this
Wish they would make one in reverse. I want to hook an external hard drive to a dash-cam that only has a micro-SD. It would be cheaper to get a cord made and get an external hard drive from an old computer or SSD like hard drive. Any ideas?
It would be nice to have an SD to usb adaptor so I could plug dash cams and such into a larger storage drive but it's hard to take anyone seriously who solders like this...
Oh My God...!!! Now I can access Files of FBI & NASA just from my card.. & My computer are also now turned into a super computer.. & now I can talk to aliens
Just out of curiosity what happens if you take the same pins required for data recovery, since we're already soldering a USB. Is the reverse possible. Can you connect a USB device to an SD card slot?
While connecting memory card video was cut and while showing working memory card inserted. Memory Card can't work on 5v rail, it have to convert into 3.3v.
4pin not 3pin .... Vcc D+ D- Vss ..... 2 power pin (2 longer pins are power not data) and 2 Data pin this modifications has been a new SD card purchase, not being a new storage on your pc
so nice but which wire is Vcc, +D, - D, and GND ? the colors of the wires changes from one manufacturer to other , so is useless to say "blue wire" "black wire" , etc
IT WOULD BE NICE IF IT WORK LIKE THAT BUT FOR EVERY USB DEVICE REQUIRES A USB CONTROLLER TO TELL THE SYSTEM WHAT IT IS THAT IS BEING PLUGGED INTO THE USB DRIVE WITH OUT THAT CONTROLLER BRO THE SYSTEM WILL RETURN WITH DEVICE NOT RECOGNIZED AND CUTS ALL POWER OFF TO THE USB PORT.
All data cable have same color code of wire And in the. Your video u connected only tree wire 1 is supply 2 is d03 is clk So without grond not completely close electronic circuit so sind be a ful
If the SD card does work the way it should be how the hell it will work by connecting it in random ways to destroy also usb port until inside the northbridge chip?
How to take the signal out of a HD digital video camera using a dummy SD card wired so that these data's comes out to be processed outside using a raspberry pi 0.
что за цвет провода, если у меня черный, красный, зеленый и белый... помоги? если вы правду скажете - вам лайкну! пока не спешу лайковать этот видео, буду проверять! #АНТИФЕЙК, #АНТИЛОЖЬ, #АНТИНАКРУТКАЛАЙКА, #АНТИРЕКЛАМЫ, короче, #АНТИВСЁ!
see them 2 longer pins they are for power not data like you connected to also an sd card runs off 3.3v and usb is 5v so bye bye sd card and any chance to recover data
No entiendo por qué se complican tanto la vida hablando de que es falso y que es cierto si no lo han intentado, la dinamica es muy simple... intentalo! Si cantas "victoria" y logras recuperar la info de tu microSD das "like" al video, si no... ¿porque le das like?!!, yo no se aun si esto funciona pero apenas lo intentare, mientras tanto... DEJEN DE HACER TANTA ARENA!! Y mejor intentelo y comenten los resultados aqui
ha ha ha. 2:47 so cut montage. Time blured. USB contain 2 power pins and 2 data pins. It newer work on 3 pins! I'm glad for him to have 1.8m views! Good fake !
usb cables have different colour codes not always white green blue and usb never work on three pins. no usb pinout is mentioned. why should this video be appreciated.
Free download data recovery software: bit.ly/3e6GlbZ
Not effective.
it's funny.I would call this usb-killer
it's fake. reasons:
the USB cable does not have the standard coloring (not that important, just a sketchy USB cable), but, the 4 wires in a USB cable are power (+), power (-), data (+) and data (-). there are 4 data lines on the SD card... pins 1, 2, 7 and 8. also, did you think that you could power a 3.3v SD card with 5v?
2:37 looks like a solder bridge between two pins.
2:47 cut between when he plugged it in and when the drive was supposedly detected.
he never showed the bottom of the SD card before he started "shouldering" it, and when he was (and before plugging it in) he never showed the top.
one more thing, the way the SD card transfers data is not the same as USB (Universal *Serial* Bus).
what is the shit in the description that says "be careful because it is only for corrupt memory card."
😂🤣🤣😅 Sholdering 🤣😅 Thanks for the laugh.
he is faltu.
Fake
Soldering not shouldering what are you using head and shoulders while watching this Hahahah
BUT what You said is true
@@efhraimparinas7567 probably an autocorrect fail :DDD
The SDCards work at 3.3V, putting 5V will heat up and destroy your SD Card... Also, the SD uses SPI interface (readable with a timer) but not on a serial bus
Is there a way or would it be possible to convert a USB key into micro sd card slot? I'm thinking of plug and play memory for a tablet which only has a micro sd card slot
@Vegan Pete is a micro sd card reader possible? The tablet in question doesn't have a USB OR a SD card slot, only a micro sd slot much like a phone. I believe the only solution is just a huge Micro SD card but I was interested in would it be possible?
@Vegan Pete holy fuckin shit your right, why didn't I think of that
th-cam.com/video/heoCec5uX7w/w-d-xo.html
@Vegan Pete I have a 3d printer, and my idea was to adapt a female usb connector to the micro usb on the printer's motherboard, so that it reads usb flash drive, but I see that it won't work, right?
2:45 - 2:51 He inserting another USB drive from Right hand side USB port while waiting to detect 😂😂😂😂😂
Wow the skill in editing from this guy... speechless 😂
th-cam.com/video/heoCec5uX7w/w-d-xo.html
Fifty bucks says this is the same guy from Microsoft Support that calls you to tell you you have a virus and it can only be removed by purchasing a gift card.
Enjoi getting scammed
2:48 video was cut and replaced with new clip showing it reading. Notice the lighting of surrounding.Fakkkeee
You are right
Random Videos yup, I have also seen this ... looks fake
This is fake
When mc insert in card reader this points already connected the computer is not any message show and you connect this points mc is working ☹.
What's the matter tell me about this
Yes Vedio editing
you right
fake ,5volt will damage memory card,also sd card require SPI interface so we require card reader to convert serial to SPI
isne to 5volt conact hi nahi kiya
there is no 5v contact, let alone any power going to this thing, there is just the data + & - and one lonely ground wire.
Ya that right
And first you would need to convert usb serial to microcontroller serial like serial ports and run that through an arduino
There's is no power. See the video
Fake. DON'T do this it will properly kill your PC or SD Card or both
Stefan Stueber
only the SD card will be killed at most
Instead of soldering on a fragile SD card why not do the soldering on an SD card holder and then insert the SD card into the holder..you can also test malt. SD cards without any more soldering or desoldering?
When soldering, do it the correct way.
Use iron to heat up wire and connector in place.
Add some solder
Allow some time for the solder to flow and fill the void between the wire and the connector
Remove the iron and wait for the solder to solidify. Don't move anything,
The completed joint should look smooth and a little shiny.
Hi 👋 please the USB port has a 2 wires
Red and black and some has a white and pink
Please I realy on your response
another tip is please don't do this it will destroy your sd card
@@emmanuelprosper641+, GND(-), Data TX, Data RX, malla.
fake video i know that its real fake
Chutia mat bana pagal ho jyga
all right
yes it worked, the dislike button worked
Chodu video...
Video KO hold krke dusra USB 😠😡😠😠😠dal diya...🖕🏻
first micro SD needs 3.3v data level and to communicate with SD card you need to use spi protocol that actually uses clock , data in , data out and chip select
to achieve this you gonna need a chip between the USB and the SD card the convert between both devices
so if you want to destroy your card just do like what he did here
th-cam.com/video/heoCec5uX7w/w-d-xo.html
Thanks, it worked for me. Did the same procedure on my phone, now I can make free calls from my computer.
Me too, it also enabled 6G on my phone, didn't you get that?
Damn😂😂😂
There are good number of apps on Google play to recover data from a corrupt SD card. The one I use works howerver there is a problem as it recovers data from the tablet it's self and the SD card so if you only have 20 GB on your device and the SD card is 30GB then there's nowhere to store the recovered data.
Wow I tried it my 2gb memory card turned into 2tb ...wow u r fake genius man 😆 ...by the way where can I get shouldering iron
Its Soldering Iron
ibrahim arif realy
lol:p
in the same shop you buy schoulder ; schoulder flux and deschouldering braid ? :p
JEEEEEZ ALL THAT SHOULDERING, MADE ME WANT TO SHOULDER SOMETHING :D
Tanks, the best way to destroy the SD Card.
o bhai ya fake ha
soldering iron
supper b0y
Moises Castro fake video
Moises Castro monu pandey
use an sd card to usb adapter!!!
even if the usb interface worked with the sd card, you are not bypassing anything with this, would still be corrupted data...
yes.... exactly.... if the data is corrupted it will never be resolved on its own.... you are just passing data differently ....
The pinout of the SD card does not match the video soldering indicated in the video. 8 pin is not used, but the author connects the ground wire to it.
there are some words made for person like this one. correct you have reached them man. repeat those in your memory and enjoy.
Why i need card reader?!!!
Tấn Lê Trung because this is fake
Tấn Lê Trung no lo
Omg it works it really works.... the dislike button.
Yes! I tried this on the car of my grandma and that thing is a beast now. I can read it's memory, tweak it all on the fly. Best part? There's none.
there is an easier way called MICRO SD ADAPTER
Hello, to which pins do I connect the wires of the M2 memory card (11 pins)? old phone's M2 memory card.
the video pauses for a couple seconds hes obviously edited to get views 2:45
I wonder if there are idiots who believed this and burned their cards?
use microSD card reader cost just 50 rupees and its build in most latest laptops . Unless you live on Moon and outdated :p
2:48
pausing the video and editing it so we can't see that you plug an actual flashdrive.
Sd card works on low voltage and Spi communication Bus not USB ,please do share right information.
video title should be how to destroy your sd card :D
2:47 jump video
Any Data Recovery can help you recover lost data from storage device like SD card, USB drive and PC/Mac: bit.ly/2Grd9AQ
thanks moron... 32gb sd is lost....
I thought one of the things that you need to prepare for this recovery is a brain.
Just use card reader otherwise your card will be destroyed permanently. If nothing important on sd card you can just experiment it.Software also needed on pc to recover corrupted data just like easeus,minitool etc.
Best way for destroy any type of memory card lol 😂😂😂
Right 😁😁😄😂😂😆😆😆😆
You do realize that there is a gadget called the card reader. There like 3 bucks and are super easy to use over and over and over.
Fakeeee
apne try kiya kya????
vijay garg han bhi ma na kia ha 32 gb ka upar sala fake video banata ha kharab ho gaya memory card computer ma dal raha tha data sab khatam ho gaya fakeeeeeeeeeeeeeeeeesew i. Report this
+Mr Shariq DRG,
G
rohitsingh kasautiya noorpur
It may work for using card without card reader, but it won't recover corrupted data.
2:46
vakt badal diya...
zazbaat badal diya...
Oo bhai maaro Mujhe Maaro...
🙄🙄
Wish they would make one in reverse. I want to hook an external hard drive to a dash-cam that only has a micro-SD. It would be cheaper to get a cord made and get an external hard drive from an old computer or SSD like hard drive. Any ideas?
1. different data protocols 2. USB uses 5V SD cards uses 3.3V 3.SD cards uses clock signal, USB don't
Need more explanation ?
2:47 bakchodi pel Diya frame Change hogaya
well i dont understanf that language but you are right
the light changing made it visible thats its famw
0:2:47 to 0:2:49, the shadow behind the laptop
Perfect way to destroy your sd card thanks😎😎😎
destroy
Amigo, Pin 4 of TF=(VDD or 3v3) , Pin 6 TF=(GND), Pin8=(DAT1->NC), se vc jogar 5V... irá queimar... o pin8 nem sequer é conectado...
MicroSD memory comes to 3.3Volta and the USB port has 5V you would have to convert DC-DC 5v to 3.3V to work it and still putty that it works ...
He didn't even connect the 5v in to the SD card lol... Still connected ground tho? weird.
It would be nice to have an SD to usb adaptor so I could plug dash cams and such into a larger storage drive but it's hard to take anyone seriously who solders like this...
Oh My God...!!! Now I can access Files of FBI & NASA just from my card.. & My computer are also now turned into a super computer.. & now I can talk to aliens
Just out of curiosity what happens if you take the same pins required for data recovery, since we're already soldering a USB.
Is the reverse possible.
Can you connect a USB device to an SD card slot?
"Shir, eil nid yur credid card information"
Like the ElectoBoom says: Never trust a guy with an accent.
Exactly 🤣
After watching his video i soon subcribed his cahannel but after reading all the comment I'm going to unscribed.🤣🤣🤣
Ye video fake hai sabhi dosto see requests hai issue video per (harmful dangerous act) Report Kare.... please please please 🙏🙏🙏🙏
Shouldering iron??
lol
Kya baat he ..।....👏👏👏
Bhai tera ilaj sahi jagah nahi hua....
You should have soldered an adapter instead of the actual micro SD card.
While connecting memory card video was cut and while showing working memory card inserted. Memory Card can't work on 5v rail, it have to convert into 3.3v.
Yes of course. Your theory is as good and valid as your welding.
Soldering
FAKE !!!!
working for me
@@craftvideos1697 how?
I know that but I still wanted to see what this guy dose !!
This simply cannot work. Period.
FAKE
4pin not 3pin .... Vcc D+ D- Vss ..... 2 power pin (2 longer pins are power not data) and 2 Data pin
this modifications has been a new SD card purchase, not being a new storage on your pc
true, but if you only want to transfer data in one direction you can use one data line.
there are other reasons that this is fake
Fake sala
hay if you were to do this on a regular sd card what ones would you wire?
Типо как кадр сменился мы незаметим, да?
В этом весь смысл))))
)))а я спаял,неработает,потом еще раз проверил,опять неработает.во баян.
so nice but which wire is Vcc, +D, - D, and GND ? the colors of the wires changes from one manufacturer to other , so is useless to say "blue wire" "black wire" , etc
fake
IT WOULD BE NICE IF IT WORK LIKE THAT BUT FOR EVERY USB DEVICE REQUIRES A USB CONTROLLER TO TELL THE SYSTEM WHAT IT IS THAT IS BEING PLUGGED INTO THE USB DRIVE WITH OUT THAT CONTROLLER BRO THE SYSTEM WILL RETURN WITH DEVICE NOT RECOGNIZED AND CUTS ALL POWER OFF TO THE USB PORT.
Halo I tried with a USB that has red white green and black cables but didn't work, what's your guidance on this issue.
All data cable have same color code of wire And in the. Your video u connected only tree wire 1 is supply 2 is d03 is clk So without grond not completely close electronic circuit so sind be a ful
"Good morning madam I'm peter from Microsoft tech support banking department"
Can you tell me about the wire colours which one is positive, negative, and which two middle data wires.
Wowwww. Its working.really dislike button is working.
Can i use same trick on bended sd card,if not please suggest me with suitable one
Ah yes just ignore the -5 volts wire you wont need it since it wont work anyway
If the SD card does work the way it should be how the hell it will work by connecting it in random ways to destroy also usb port until inside the northbridge chip?
Give more voltage to break your sd card, good job :! 😀
I'm pretty sure SD cards work at 3.3V while USB power lines have 5V
for usb detection u need positive , negative, rx and tx... so this video is fake
Good tiçhing thanks 👍👌👌👍👌👍👍👍👌
Four wire ---- white , green / red,black......ab isme se blue ki jagh konsi lgegi ?
I have cable that contain white green and red wire ... Can it connect without blue wire
Green wire is data + and white wire is data - and blue wire is ground or positive......
Because my usb cables having green,red,white, and black.
Do I need a corrupted SD card just to test it or can I buy / find a worthless SD card to test it?
Вау!!! Какое хорошее пособие о том как сломать флешку.
bhai apka sd card pahele se working hai waise fool bana bahut acche se aata hai
is it not connected red USB cable ? blue is same as black USB cable ?
How to take the signal out of a HD digital video camera using a dummy SD card wired so that these data's comes out to be processed outside using a raspberry pi 0.
что за цвет провода, если у меня черный, красный, зеленый и белый... помоги? если вы правду скажете - вам лайкну! пока не спешу лайковать этот видео, буду проверять! #АНТИФЕЙК, #АНТИЛОЖЬ, #АНТИНАКРУТКАЛАЙКА, #АНТИРЕКЛАМЫ, короче, #АНТИВСЁ!
My USB cable has no blue wire.
It has Red, Black, Green & White
see them 2 longer pins they are for power not data like you connected to also an sd card runs off 3.3v and usb is 5v so bye bye sd card and any chance to recover data
No entiendo por qué se complican tanto la vida hablando de que es falso y que es cierto si no lo han intentado, la dinamica es muy simple... intentalo! Si cantas "victoria" y logras recuperar la info de tu microSD das "like" al video, si no... ¿porque le das like?!!, yo no se aun si esto funciona pero apenas lo intentare, mientras tanto... DEJEN DE HACER TANTA ARENA!! Y mejor intentelo y comenten los resultados aqui
Have you ever seen a blind race driver ? Now yes
Wow 100%works
I tried myslef and it worked
Bello, I have a question. Also is I could use the another side of the cable for use in a device Android?
Thanks You, bye.
It is fake dude, it will surely burn the SD card and will absolutely not work
ha ha ha.
2:47 so cut montage. Time blured.
USB contain 2 power pins and 2 data pins. It newer work on 3 pins!
I'm glad for him to have 1.8m views! Good fake !
where can I get a shouldering iron?
usb cables have different colour codes not always white green blue and usb never work on three pins. no usb pinout is mentioned. why should this video be appreciated.