You must do 1 of 2 things, or disolve all metals, or remove only industrial silver contacts and disolve them. After disolving, filtrațion, precipitațion, do the lye and sugar transfornațion, washing, and after that melt the silver. You shold get atleast 7g of dilver from that amount.
Al fundir el cloruro de plata tenes mas pérdidas de material, siempre es recomendable metalizar el cloruro de plata con clavos de hierro o con soda cáustica...
good tip I use, attach an angle grinder to a support facing up with a disc of medium thickness, more than 1.5mm, and press on the underside of the contact, it will heat up and loosen the silver contact, huge acid savings. hope to have helped.i am from Brasil, i use Google traductor
Waste of Nitric Acid! Remove the contacts from the copper arms first. Use an Oxy/Propane or Oxy Acetylene Torch. When it starts to glow red, pluck off the contact. Saves you Time, Acid and Money!
You do realize that in his country he can get nitric acid for less than electricity per kilowatt in the US. The amount of nitric acid he used in this video in his country cost less than $0.001. honestly, not even a tenth of a penny. He could do this ten times, and it might cost him a penny.
You must do 1 of 2 things, or disolve all metals, or remove only industrial silver contacts and disolve them. After disolving, filtrațion, precipitațion, do the lye and sugar transfornațion, washing, and after that melt the silver. You shold get atleast 7g of dilver from that amount.
Sir thanku for information
Good information sir, very very thanks sir
Al fundir el cloruro de plata tenes mas pérdidas de material, siempre es recomendable metalizar el cloruro de plata con clavos de hierro o con soda cáustica...
good tip I use, attach an angle grinder to a support facing up with a disc of medium thickness, more than 1.5mm, and press on the underside of the contact, it will heat up and loosen the silver contact, huge acid savings. hope to have helped.i am from Brasil, i use Google traductor
Thank you information sir 👍🙏
سلام،مگه کلریدنقره را میشه ذوب کرد؟
پس چرا بعضیا کلریدنقره را به اکسیدنقره تبدیل میکنند وبعدذوبش میکنند.
Ketika menuangkan nitric acid apakah menambah air?
Waste of Nitric Acid! Remove the contacts from the copper arms first. Use an Oxy/Propane or Oxy Acetylene Torch. When it starts to glow red, pluck off the contact.
Saves you Time, Acid and Money!
Sir 👍🙏Thank you for information
You do realize that in his country he can get nitric acid for less than electricity per kilowatt in the US.
The amount of nitric acid he used in this video in his country cost less than $0.001. honestly, not even a tenth of a penny. He could do this ten times, and it might cost him a penny.
@@scrapping4shibawhich percent HCl and HNO3 for use for silver recovery
Good video sir.👍
With lots of love💝
Thanku
Which percent of HCl and nitric acid use for silver recovery
Solo con acido nítrico, por cada gramo de material que tengas se utiliza 1,5 ml de acido (concentrado) y 1,5 ml de agua destilada....
Nice video i learn a lot from you 🤘🤘
Thanku
Kya aap MCB points lete ho
Aap k pass h kya
61gm copper is Rs 30 Plus acid and heat and gain silver Rs 41 vah
Assalam o alikum sr
mi sa che c'è qualcosa che non torna...
100% pure silver yes or no
Plata ley quizas 960 a 980 no se si con este proceso se llega a 999,9
U r a great 👍👍
Thanku
Good information 👍
Thanku
Nice video 👍
Thanku
Good video 👍👍
Thanku
🫡🫡👍👍👍👍
61gm m 0.78gm silver vah
Good 👍 👍
Thanku
Good evening sir
Thanku
Waste of time and good acid just desolving copper
mail address plz
Plz comment box
Definitely not worth the effort and time
Pls number sir
Good video 👍
Thanku
Thanku