Quite expensive for what it is - but I can see uses for it: locking doors for some children (ie not allowing them into the kitchen) without requiring keys all the time, for example. I'm thinking of incorporating one into a home-theatre system, to enforce age-restriction of programmes.
This is amazing. I am a huge fan of the work and ingenuity that goes into the adafruit products. I have used the RGB negative LCD and the LCD display shield in my fire alarm control panel that I made with my arduino UNO ,your shield and LCD, some relays, and batteries. all I need is to learn how to use EEPROMS with Arduino and then I'll be set. thank you for doing what you do to make our projects possible.
+Gpexalarm101 hi, can you please guide me the same product can store fingerprint image in external storage? or computer. or is there any way to send it to my application?
Hello, Adafruit.........I am stuck. I have attached all the wires as shown in the video even when I upload it to board the fingerprint sensor lights up......but when I am using the ENROLL example then it is always giving the same error in the output. i.e. "Adafruit Fingerprint sensor enrollment Did not find fingerprint sensor :( " I don't know why. Please help me with this
Hmmm, so the sensor stores the finger print data.... is there a way to export this? I'm thinking of having multiple modules reading from the same db of stored fingerprints
Suddenly appeared in my recommendations, check this finger sensor from 9 years ago out lol I am wondering whether there is any improved version of this sensor recently?
Can you do this on a lock for a locker? I could screw open the lock and put the motherboard inside of it? Is there a size for it or do I have to make a custom size?
Is it possible to just save and write new Images in this Fingerprintsensor, without connecting to PC? Just using Arduino and some Keys? So you can Login say Number 100 and delete it or you can login and say new finger? Is it possible or is the header from adafruit not enough to do this with the Arduino directly? Is there any possibility?
It is possible to get a list of all the components used for the LCD section? Perhaps even the code used? I'm not very tech savy when it comes to these kind of things
would it be possible to hook this system up to the inside of my computer, where I can then use it to unlock and log in? P.S. I do not want to use USB (they are too messy) But I'm open to using Bluetooth or wireless, as my system supports it.
My finger print sensor light is not glowing contnously. Is it that the finger print light sensor should glow continously. Or if the blinking is because serial transmission
Hi Adafruit Industries. Please help me. How can I retrieve those id's save in fingerprint. To create id automatic without input id# when I enroll some finger. I plan to make id# increment. Ex: Ready to enroll a fingerprint! Please Type in the ID # you want to save this finger as... I want to automatic create id in there. Please help me. Thank you Adafruit Industries.
I need a system to identify several people and I throw an identification code for each of these people. This for access control. This system allows me to do this? already have some code for this purpose? thank you very much.
I have question, after we enroll the finger to fingerprint module, and then the power is shutting off, is the finger still stored? pls answer me, thx b4
I have done all steps and light in fingerprint sensor is also ON but while in serial moniter it execute till ( waiting for fingerprint) and then i put my finger in sensor it not happening anything it's not scanning my fingerprint not matching and even not enrolling.....please help me
so as it is shown that if the fingerprint is correct then it shows you the finger id#. i want to add an error message if the finger print is wrong or it isnt stored in the sensor, what should i do??
I have a question, this project only works with that type of fingerprint sensor? or also it could work with another one? because I have a fingerprint sensor but I'm not sure if it can be adapted to my arduino. Thanks and nice tutorial.
hi ma'am/sir I am a student and working with my project for 2 months only, this is my first time to use fingerprint sensor and arduino, can i have a copy of your code? Thank you!
Hello, I tryed use SFG DEmo, but I get also one answer "open device fail. Please check the password and the device address!". I'm shure, that I connect all pins true, but he didn't want work. PS: when I touch button "Open Device" and enter number of com-port of this device, Arduino UNO start lighting on L-led, and then turn on always
sory one other question remind,, optical F.P device can store 80 fingerprint templates but can't more, so i am confused about this that than how we use it in elections..? is it can support other flash or any data base..?
good evening. how could i get a code of the sensor ? put a finger and don't save the fingerprint. otherwise get a bin or hex number that refer to the finger? can you help ?
Hello, I bought a fingerprint 751 but when I fed my Arduino board , the sensor becomes red and 1 second after it turns off and therefore it is not detectable because it is offline , you have solutions for solve my problem?
hi there, i have problem with my fingerprint project, since my project connected to HMI which required modbus rtu protocol to communicate. i dnt know how to connect it..can u help me? thanks
Hi Adafruit! I am interested in a project using this fingerprint sensor and arduino board. Could you please tell me what language this code is in? Thanks, Pranav
I'm new to this device. I'm trying to enroll fingers, but every time I enroll my finger, it shows this message, "Image taken Image converted Remove finger ID 1 Place same finger again Image taken Image converted Creating model for #1 Unknown error " What should I do now. :(
Hello, my sensor panel is not blinking red, and when I try to enroll it,goes like this: Adafruit Fingerprint sensor enrollment Found fingerprint sensor! Ready to enroll a fingerprint! Please type in the ID # (from 1 to 127) you want to save this finger as... Enrolling ID #1 Waiting for valid finger to enroll as #1 Communication error How to deal with it?
i will make Project ( fingerPrint To open the Lock ) With Arduino UNO & LCD Shield Kit w/ 16x2 Character Display & Fingerprint Sensor , but i dont know what code i use for the Arduino and the LCD can u please help me
Hi, I've been learning about this and want to ask if is there a way to storage fingerprint in another space besides the one that the sensor bring (to have more fingerprints)?
Hello Hamza,this is fiona from CAMABIO,China,a leading manufacturer in fingerprint sensor reader,and we are the supplier of many famous brands,their products are using our fingerprint sensor for integration.if you have requirement on it,please contact me,my email is :camasales04@camabio.com whatsapp is:+8613510260904
I have my own fingerprint scanner and i tried it on your library. The Serial monitor says that "Did not find fingerprint sensor :( ". Does that mean that your library works only on your fingerprint scanner? or i just have to make an adjustment to the codes? please help me out. thanks
10 ปีที่แล้ว
Hello, I have the same problem now. Did you solve it?
i am also facing the same proublm....anyone who have solved plz help
9 ปีที่แล้ว
Try both: Windows 8 and Windows 7. Plus, Try Arduino IDE 1.5.0 (or the one which does not suppot YUN). And make sure that you made all connections properly, and tight.
hello mam will you please let me know how to detect this..my fingerprint is not blinking continously it is just stoped when fingerprint is placed it is not detecting..due to this our project is under process .. and it is displaying as fingerprint sensor not connected
learn.adafruit.com/adafruit-optical-fingerprint-sensor/wiring-for-use-with-arduino and maybe you mistake RXTX wires I add delay and win its problem Serial.begin(9600); delay(2000); Serial.println("fingertest"); // set the data rate for the sensor serial port finger.begin(57600); delay(2000);
Hello Nikhil,this is fiona from CAMABIO,China,a leading manufacturer in fingerprint sensor reader,and we are the supplier of many famous brands,their products are using our fingerprint sensor for integration.if you have requirement on it,please contact me,my email is :camasales04@camabio.com whatsapp is:+8613510260904
Quite expensive for what it is - but I can see uses for it: locking doors for some children (ie not allowing them into the kitchen) without requiring keys all the time, for example. I'm thinking of incorporating one into a home-theatre system, to enforce age-restriction of programmes.
This is amazing. I am a huge fan of the work and ingenuity that goes into the adafruit products. I have used the RGB negative LCD and the LCD display shield in my fire alarm control panel that I made with my arduino UNO ,your shield and LCD, some relays, and batteries. all I need is to learn how to use EEPROMS with Arduino and then I'll be set. thank you for doing what you do to make our projects possible.
+Gpexalarm101 hi,
can you please guide me the same product can store fingerprint image in external storage? or computer. or is there any way to send it to my application?
Hello, Adafruit.........I am stuck. I have attached all the wires as shown in the video even when I upload it to board the fingerprint sensor lights up......but when I am using the ENROLL example then it is always giving the same error in the output. i.e. "Adafruit Fingerprint sensor enrollment
Did not find fingerprint sensor :(
"
I don't know why. Please help me with this
best video please never stop to any video in you tube, it will help more than billion people
thanks a lot it help me a lot
how are we going to make fingerprint data to be accessed for user maintenance such as (add,delete,etc)? thanks!
could you make a video on how to use this with the solonoid to lock a safe? it would be awesome sauce if you did!
what do you mean 'connect power and ground', how do i do this? do i need extra wires? if so do they need to be specific wires? are they jumper wires ?
Hmmm, so the sensor stores the finger print data.... is there a way to export this? I'm thinking of having multiple modules reading from the same db of stored fingerprints
Suddenly appeared in my recommendations, check this finger sensor from 9 years ago out lol
I am wondering whether there is any improved version of this sensor recently?
Can it be used with other microcontrollers, like the TIVA C series?
Can you please help that how can I access and extract data of this fingerprint print sensor as I need them to be uploaded on cloud.
very good and simple!!!! thanks
Each fingerprint ID is 512 bytes long?
Can I generate the ID without saving it to the flash memory?
Thanks and congrats for the great work!
Can you do this on a lock for a locker? I could screw open the lock and put the motherboard inside of it? Is there a size for it or do I have to make a custom size?
nice tutorial. please make a video on fingerprint sensor and rfid combined lock. that would be awsome. please it's a request. thank you in advance
Is it possible to just save and write new Images in this Fingerprintsensor, without connecting to PC? Just using Arduino and some Keys? So you can Login say Number 100 and delete it or you can login and say new finger? Is it possible or is the header from adafruit not enough to do this with the Arduino directly? Is there any possibility?
will be thankful for you satisfctry answer.. waiting
It is possible to get a list of all the components used for the LCD section? Perhaps even the code used? I'm not very tech savy when it comes to these kind of things
how do you connect this fingerprint to an esp3 module
according to the coding, will i able to assign different work to different fingerprint?
After registering, can you hook this up to a breadboard or some sort of analog circuit? Do you have to use an arduino with this?
The prints stored stay on the boards memory only? Making sure due to security concerns.
Nice gun accessory, too bad it isn't little smaller, but hey, it obviously works. Now for some mechanics.
would it be possible to hook this system up to the inside of my computer, where I can then use it to unlock and log in?
P.S.
I do not want to use USB (they are too messy)
But I'm open to using Bluetooth or wireless, as my system supports it.
can u make a finger print lock with motor
Do you need to add extra code for the rgb led display
if i want i can overwrite the program of this finger print scanner module?
Just wondering, are you a engineering or programming student? You got some good ideas!
can it possible to build keypad lock system and fingerprint locking system in one mocrochip
Is it possible for the green light to stay switched until I scan my finger print again for turning off?
My finger print sensor light is not glowing contnously. Is it that the finger print light sensor should glow continously. Or if the blinking is because serial transmission
Awesome!!! When i will be able to do this stuff😘😋
Could this be used to power on something if the finger print is positive?
Hi Adafruit Industries. Please help me. How can I retrieve those id's save in fingerprint. To create id automatic without input id# when I enroll some finger. I plan to make id# increment.
Ex: Ready to enroll a fingerprint! Please Type in the ID # you want to save this finger as...
I want to automatic create id in there. Please help me. Thank you Adafruit Industries.
I need a system to identify several people and I throw an identification code for each of these people. This for access control.
This system allows me to do this? already have some code for this purpose?
thank you very much.
hi. can you add in library function : WriteNotepad , ReadNotepad ?
I have question, after we enroll the finger to fingerprint module, and then the power is shutting off, is the finger still stored? pls answer me, thx b4
yes it remains stored
Is your library file compatible with all kind of FP sensors or is it specific to yours???
I have done all steps and light in fingerprint sensor is also ON but while in serial moniter it execute till ( waiting for fingerprint) and then i put my finger in sensor it not happening anything it's not scanning my fingerprint not matching and even not enrolling.....please help me
so as it is shown that if the fingerprint is correct then it shows you the finger id#. i want to add an error message if the finger print is wrong or it isnt stored in the sensor, what should i do??
I have a question, this project only works with that type of fingerprint sensor? or also it could work with another one? because I have a fingerprint sensor but I'm not sure if it can be adapted to my arduino. Thanks and nice tutorial.
you have to research about your fingerprint sensor and how it works and then you will see
hello guys, is it possible to connect raspberry pi with fingerprint scanner model pm10a?
HELP, PLEASEEEE
hi ma'am/sir
I am a student and working with my project for 2 months only, this is my first time to use fingerprint sensor and arduino, can i have a copy of your code? Thank you!
What if I want to store the fingerprints on a computer? I want to verify over LAN?
its possible to use this fingerprint scanner on motorcycle bike ?
please reply thanks.
Good Job!
how can i download this (for seminar purpose) ??
What do you call the lcd you attached to the arduino ? i want to have one thank you
My digital output pins only make my LEDs very dim. I can't get them as bright as the ones in the video, even with no resistor. Am I missing something?
Hello, I tryed use SFG DEmo, but I get also one answer "open device fail. Please check the password and the device address!".
I'm shure, that I connect all pins true, but he didn't want work.
PS: when I touch button "Open Device" and enter number of com-port of this device, Arduino UNO start lighting on L-led, and then turn on always
I am a python programmer can i use Python Language To Code My Arduino To use This Sensor??????
sory one other question remind,, optical F.P device can store 80 fingerprint templates but can't more, so i am confused about this that than how we use it in elections..? is it can support other flash or any data base..?
good evening.
how could i get a code of the sensor ?
put a finger and don't save the fingerprint. otherwise get a bin or hex number that refer to the finger?
can you help ?
I want the same project for Roboduino. Is it possible???
Hello, I bought a fingerprint 751 but when I fed my Arduino board , the sensor becomes red and 1 second after it turns off and therefore it is not detectable because it is offline , you have solutions for solve my problem?
OK, so, what if I plug off my Arduino? Where does it save the IDs? At the EEPROM?
nice video
If i buy scanner from different not adafruit will this coding still works ? cause I think it won't can anyone tell me how to change it
hi there, i have problem with my fingerprint project, since my project connected to HMI which required modbus rtu protocol to communicate. i dnt know how to connect it..can u help me? thanks
love you....thank you so much!!!
Hi Adafruit! I am interested in a project using this fingerprint sensor and arduino board. Could you please tell me what language this code is in?
Thanks,
Pranav
Hey,
The Arduino IDE uses a modified form of C
Hope this helps!
Oh! Thanks
can any one tell me what is the program for this thing ??
how can i make it work ?
or where can i find the program to let it work ?
can we attach the fingerprint sensor to a switch?
I'm new to this device. I'm trying to enroll fingers, but every time I enroll my finger, it shows this message,
"Image taken
Image converted
Remove finger
ID 1
Place same finger again
Image taken
Image converted
Creating model for #1
Unknown error
"
What should I do now. :(
Hello, my sensor panel is not blinking red, and when I try to enroll it,goes like this:
Adafruit Fingerprint sensor enrollment
Found fingerprint sensor!
Ready to enroll a fingerprint!
Please type in the ID # (from 1 to 127) you want to save this finger as...
Enrolling ID #1
Waiting for valid finger to enroll as #1
Communication error
How to deal with it?
Thank you so much this video are very helpful for me thanksssssssssssss
bro can you please tell me from where i can download my code for fingerprint
can this be used as a power switch?
All our videos are available for HD download on Vimeo. Soon TH-cam will have this function too.
youtube still didnt add it hhh lol
It has, but only for Premium members and you have to watch the video through TH-cam despite being downloaded
Mam can we make this for bike self starter ?
provide me any kitng buyng website for the project of electonic voting mchine
i am using a GT511C3 FPS and the serial com window shows an error "Did not find fingerprint sensor :( " any solution to this problem?
conect rx of fps with tx of arduino (pin 3) and tx of fps with rx of arduino(pin 2)
R305 finger print module is working with Arduino and using this code. Do not use MAX232 in interfacing.
+Electro-Unique Creations I WANT CODE FOR R305 FRINGERPRINT SCANNER ITS URGENT PLS HELP ME
Hi, can u share me the code ? chongshienn_@outlook.com
tq .
Can i use the fingerprint sensor GT-511C1R?
i will make Project ( fingerPrint To open the Lock ) With Arduino UNO & LCD Shield Kit w/ 16x2 Character Display & Fingerprint Sensor , but i dont know what code i use for the Arduino and the LCD can u please help me
can I increase the storage capacity of templates from 162 templates to maybe say 20,000 templates using an SD card or say an external HDD?
+Taki Uddin Assalam-O-ALukum,
have you got the solution by using the same sensor? i have same query or can it save into computer?
+Shariq Ayaz no I haven't.. but I think you can use a SD card and SD shield to store them
is it possible to extract the user ID file after enrollment??
Hi, I've been learning about this and want to ask if is there a way to storage fingerprint in another space besides the one that the sensor bring (to have more fingerprints)?
How can I create my own scanner ??
can we attache green and white wire to the analog pins?
Yes you can
Just put 255 or 0
Hello Hamza,this is fiona from CAMABIO,China,a leading manufacturer in fingerprint sensor reader,and we are the supplier of many famous brands,their products are using our fingerprint sensor for integration.if you have requirement on it,please contact me,my email is :camasales04@camabio.com whatsapp is:+8613510260904
no. it is for software serial pins.
I have my own fingerprint scanner and i tried it on your library. The Serial monitor says that "Did not find fingerprint sensor :( ". Does that mean that your library works only on your fingerprint scanner? or i just have to make an adjustment to the codes? please help me out. thanks
Hello, I have the same problem now. Did you solve it?
I am also facing same problem please let me how did you solve it.
i am also facing the same proublm....anyone who have solved plz help
Try both: Windows 8 and Windows 7. Plus, Try Arduino IDE 1.5.0 (or the one which does not suppot YUN). And make sure that you made all connections properly, and tight.
i am also facing same problem , can anyone solve this
hello mam will you please let me know how to detect this..my fingerprint is not blinking continously it is just stoped when fingerprint is placed it is not detecting..due to this our project is under process .. and it is displaying as fingerprint sensor not connected
keepvid .com you can copy any youtube url and download it as a video or even mp3.
May I know which Fingerprint sensor is best...?
I use the FPM10A/FPM10 by Adafruit and it works great, would recommend it.
how you display a message by id.. And how i want to list all id that i has been scanned?
Its not working in gt511C3
Showing that sensor is not found
Can you help me ???
Yep, go for it!
how to slove this error "Did not find fingerprint sensor :("
it displays on serial monitor.
learn.adafruit.com/adafruit-optical-fingerprint-sensor/wiring-for-use-with-arduino
and maybe you mistake RXTX wires
I add delay and win its problem
Serial.begin(9600);
delay(2000);
Serial.println("fingertest");
// set the data rate for the sensor serial port
finger.begin(57600);
delay(2000);
I have communication error in my Ada enrollment of finger print sensor
How to transfer fingerprint data from fingerprint sensor to database?
Hi, does it work with Raspberry PI?
how to dowload adafruit fingerprint library
Could you use it with a rasberry pi to?
hi can using this with micro controller 16f874?
thanks
how to save data if i want to save more than one fingerprint?
does it need to be conected to the comp. to work?
Of course not, that's why an arduino is used.
+CB LS sorry, thanks :)
hi can you give me a link to the code which works with the display as well
If you got that could you send it to me please
Thats amazing
please give me required code for this finger print sensor..
If you got it could you send me it to me as well please
can we connect Fingerprint Sensor to PLC ? witch type of signal come out from sensor ?
Dude if you cannot read a data sheet how are you programming PLC's?
is there any way i can send the registered fingerprint to my base station or somewhere else via WiFi or BLE and scan my fingerprint on there.?
Hello Nikhil,this is fiona from CAMABIO,China,a leading manufacturer in fingerprint sensor reader,and we are the supplier of many famous brands,their products are using our fingerprint sensor for integration.if you have requirement on it,please contact me,my email is :camasales04@camabio.com whatsapp is:+8613510260904