Great great video man!! My jetta didnt blow in the superior exit, and checking like the video, i found that the back servomotor was locked. Cleaned and recalibrated it and started to work right! I owe you the repair bill. XD
First do Basic settings with VCDS to calibrate flaps if not works try to pulverize electric contacts spray to servomotors and to polen filter hole , when climatronic is ON at max. Speed. If still not working you need to replace servomotors. See what errors you have in VCDS.
Hi. I've got a b5 passat 2004, with the ac switched off, I can't regulate the air temperature inside the car! Choosing 18° the air is cold, in the minute that I increase the temperature it turns to hot, even at 19° or 20°. It's impossible to have an average temperature. What could be the cause of this problem? It would be great some help.
Check the heat radiator. Under the bonnet behind the engine are 2 hoses, remove them both and pressurize water. You put water on both, one at a time. See if it works.If it didn't work it meant that is a problem at motor flaps. Diagnosis with VCDS will show if is problem with flaps. Sorry if English is wrong.
C.M C.M Thank you my friend. The problem is definitely with the flaps. I am getting rid of the car after Christmas so looking for a quick fix to see me through the winter months. Any suggestions? Your English is very good 👍🇬🇧🏴🇬🇧🏴
@@gatecfixmods hello. The temperature sensor is located in front of the car, in front of the cooling radiator. If you look through the grid in the middle of the bar you will see it. Why you replace? It's indicate wrong? Change it only if it's indicate wrong temperature at climatronic display. Photo: encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcRnLRGqfgG_z7dzzDpoTT-RHGZWNrPBjAEKPWg6dbouG4QwVbvp
hi, do you know what exact motor is faulty, i have flow but no heat the flow is from all the places just no heat also get these codes . just i want to be sure to know the right motor to change thanks 00603 - footwell/defroster Flap Positioning Motor (V85) 37-00 - faulty pasat b5 positioning motor for temperature flap v68 vw footwell defroster flap positioning motor v85 01274 - Air Flow Flap Positioning Motor (V71) 37 -00 - Faulty
Sorry to be so off topic but does anybody know a method to get back into an instagram account?? I stupidly forgot the password. I would appreciate any assistance you can offer me.
@Alan Konnor Thanks for your reply. I got to the site through google and Im in the hacking process now. Looks like it's gonna take quite some time so I will reply here later with my results.
Great great video man!! My jetta didnt blow in the superior exit, and checking like the video, i found that the back servomotor was locked. Cleaned and recalibrated it and started to work right!
I owe you the repair bill. XD
Where are the v71 and temperature sensor? I need reemplace it and the v2. Thanks
Heater is blowing only hot air where do you think is the fault?
botao duro do climatronic como resolver
How do you go about fixing the motors for the servo flaps when they break
First do Basic settings with VCDS to calibrate flaps if not works try to pulverize electric contacts spray to servomotors and to polen filter hole , when climatronic is ON at max. Speed. If still not working you need to replace servomotors.
See what errors you have in VCDS.
C.M C.M Heater is only blowing cold air. What would you check first?
@@London1064 the v2
@@gatecfixmods what is it?
Hi.
I've got a b5 passat 2004, with the ac switched off, I can't regulate the air temperature inside the car! Choosing 18° the air is cold, in the minute that I increase the temperature it turns to hot, even at 19° or 20°. It's impossible to have an average temperature.
What could be the cause of this problem?
It would be great some help.
Hello. You need to put on vcds diagnose to see what problems have.
I have no heat in my car, i read some codes for the temperature flap (is it the flap motor?) And its a permanent fault
Do you know where i find these flap motors?
Did you solve? Same problem
How do you Make it display temp and not -C ?
I don't know what you mean ... Why do appear -- instead of the temperature? This is because the temperature sensor is removed.
I have climatronic that I am installing from another car. But illumination and outside temp does not display - -C
Its celsius... America needs to change their temperature stuff...
Press and hold econ+auto same time
@@florinmatei4507 Will that change it from °C or °F Or will that turn off canbus? Which wire is for outside temp
Heater is only blowing cold. What would you check first?
Check the heat radiator. Under the bonnet behind the engine are 2 hoses, remove them both and pressurize water. You put water on both, one at a time. See if it works.If it didn't work it meant that is a problem at motor flaps. Diagnosis with VCDS will show if is problem with flaps.
Sorry if English is wrong.
C.M C.M Thank you my friend. The problem is definitely with the flaps. I am getting rid of the car after Christmas so looking for a quick fix to see me through the winter months. Any suggestions? Your English is very good 👍🇬🇧🏴🇬🇧🏴
How problems temperature display ---
I removed temperature sensor when I removed the board.
How to check temperature sensors board my skoda superb not display---plese board map my ac compressor not work 2007 modal superb
@@kengarage hello, where is the tempertature sensor? I need reemplace it but I dont know the position in the board.
@@gatecfixmods hello. The temperature sensor is located in front of the car, in front of the cooling radiator. If you look through the grid in the middle of the bar you will see it.
Why you replace? It's indicate wrong?
Change it only if it's indicate wrong temperature at climatronic display.
Photo: encrypted-tbn0.gstatic.com/images?q=tbn%3AANd9GcRnLRGqfgG_z7dzzDpoTT-RHGZWNrPBjAEKPWg6dbouG4QwVbvp
@@kengarage vcds says that my passat has a fault 00818 (short to B+) in the sensor for evaporator outlet temperature (G263).
hi, do you know what exact motor is faulty, i have flow but no heat the flow is from all the places just no heat also get these codes . just i want to be sure to know the right motor to change thanks
00603 - footwell/defroster Flap Positioning Motor (V85)
37-00 - faulty
pasat b5 positioning motor for temperature flap v68
vw footwell defroster flap positioning motor v85
01274 - Air Flow Flap Positioning Motor (V71)
37 -00 - Faulty
Did you find out? Same problem now I have!! 😢
can the airflow motor be replaced without removing the dashboard?
Sorry to be so off topic but does anybody know a method to get back into an instagram account??
I stupidly forgot the password. I would appreciate any assistance you can offer me.
@Dean Valentino Instablaster ;)
@Alan Konnor Thanks for your reply. I got to the site through google and Im in the hacking process now.
Looks like it's gonna take quite some time so I will reply here later with my results.
@Alan Konnor It worked and I finally got access to my account again. I'm so happy!
Thank you so much, you saved my ass !
@Dean Valentino happy to help :D