It looks amazing on the car. I had mine completely molded to the car. Along with the reae bumper and the rocker panels. Totally makes the car look different. Mine is all seamless.
You probably dont give a shit but does any of you know of a tool to log back into an Instagram account? I was dumb lost the password. I appreciate any assistance you can give me
@Joe Valentin Thanks so much for your reply. I found the site thru google and Im waiting for the hacking stuff now. Takes a while so I will get back to you later with my results.
Yes and no, you really just have to come to terms with the fact that you’ll never run the car again without a widebody kit on it, and it may be harder to resell to certain audiences if you go that route. I didn’t stress that much thinking about it because I just wanted to have fun with this build, and I’m probably going to keep it and turn it into a bigger project in the future when it isn’t my daily.
At the time it was about price. And then between deciding if I wanted a bk1 3.8 or 2.0T, I picked the 3.8 because it's much more reliable in that same model year.
unfortunately no, if you don’t cut the rear quarter the wheel won’t fit especially if you’re lowered any amount, you’ll be hitting your stock fender to the middle of your tire.
Hello, so I'm trying to get my hands on those headlights but I can't seem to find them anywhere, where did you get yours and what are they called? Thx!
Hi love the genesis, I don’t know for how much time you had the car but, have you ever had any problems with it? Are these cars reliable? Because I am planing on getting a 2.0t or a 3.8. I would apriciate it thanks
Hey! The only major issues I've had so far are my AC compressor blowing (at about 125k miles) and then literally yesterday my throttle body went out (at 128k miles). Other than that I've had no issues!
Mine didn't clip back in either LMAO :/ I have them zip tied, going to address the issue more once I get aftermarket side skirts that cover the whole rocker panel
$900-$1000 they don’t sell it as a full kit now unfortunately the front fenders and rear panels are separate sets monsterservice.pro/catalog/wide_body_kits/hyundai/genesis_coupe/
I really want this kit, but new to the process 😅. Why did U have to weld that part for the rear? Why not cut it instead? Is it because it’s too hard to cut off?
BoostedSamuari we welded/sealed that area because if it were to rain, water would get inside the car and possibly the trunk as well. Keeps it sealed off from the elements. And we folded the flaps up instead of cutting them off so that we would have minimal holes to seal up!
John Delpriore Yes! I will be posting more photos on my instagram soon as well with the new 32mm spacers so you will be able to see the new front fitment (just under flush). But rear with the 38mm is pretty flush. You could go bigger with 38mm in the front too depending on how much camber/wheel poke u want to run!
Your car is looking more beautiful each video 😻 keep the videos coming🙌🏽
This is dope I was gonna go monster service but sold my kit for the remake widebody kit. Can’t wait to see the progress, subscribed for sure.
24K Coupe Thanks bro! Your build is clean af 🙏🏼
Thank you
It looks amazing on the car. I had mine completely molded to the car. Along with the reae bumper and the rocker panels. Totally makes the car look different. Mine is all seamless.
You probably dont give a shit but does any of you know of a tool to log back into an Instagram account?
I was dumb lost the password. I appreciate any assistance you can give me
@Miles Isaac Instablaster =)
@Joe Valentin Thanks so much for your reply. I found the site thru google and Im waiting for the hacking stuff now.
Takes a while so I will get back to you later with my results.
@Joe Valentin It worked and I now got access to my account again. I'm so happy!
Thank you so much you saved my ass !
@Miles Isaac no problem =)
Your car is looking good
Nice got hit on my read quarter as going to do this to do a simple fix.
Amazing! You know where you got your love of Cars from don't you ;) And I love the Goat!
What product did you use as seam sealer on the rear fenders to seal them up? (Thanks in advance, widebody R34 owner)
I can’t recall 100%, but I believe it was either Dynatron Gray Auto Seam Sealer or Evercoat Seam Sealer
Do you just press on the gas and than let go to get those pops at 1:37?
mbn I’m trying to be like you one day lol. I’m just starting my journey.
man damn i wnana wide body kit mine i’m looking at too many videos😭
At any point of this build did you have 2nd thoughts about hacking up your rear quarters? I own one and doubt I have the courage
Yes and no, you really just have to come to terms with the fact that you’ll never run the car again without a widebody kit on it, and it may be harder to resell to certain audiences if you go that route. I didn’t stress that much thinking about it because I just wanted to have fun with this build, and I’m probably going to keep it and turn it into a bigger project in the future when it isn’t my daily.
Why’d you decide to get a bk1 instead of a bk2?
At the time it was about price. And then between deciding if I wanted a bk1 3.8 or 2.0T, I picked the 3.8 because it's much more reliable in that same model year.
What size Cleco clips did you get??
MG Gamer 1/8” !
Heya I was wondering do you need to declare the body kit too your insurance company or can you just wing it ?
I want to get the same kit I have the same headlights on my bk2 but instead the hex halos sit up right 🙏🏼
How’d you fit bk1 headlights on a bk2?
Is it possible to do this without cutting? I don't really want to cut anything on my car
unfortunately no, if you don’t cut the rear quarter the wheel won’t fit especially if you’re lowered any amount, you’ll be hitting your stock fender to the middle of your tire.
@@CynthiaCzikall alright thanks for answering, guess I have no choice lol
@@Jacob-rt6on full send or no send haha!
Are you gunna be painting the kit or are you Leaving it ?
Hello, so I'm trying to get my hands on those headlights but I can't seem to find them anywhere, where did you get yours and what are they called? Thx!
they are spec-d headlights and I ordered them from redline360.com ! The halos were custom built in and they are from circuit demon
Hi love the genesis, I don’t know for how much time you had the car but, have you ever had any problems with it? Are these cars reliable? Because I am planing on getting a 2.0t or a 3.8. I would apriciate it thanks
Hey! The only major issues I've had so far are my AC compressor blowing (at about 125k miles) and then literally yesterday my throttle body went out (at 128k miles). Other than that I've had no issues!
Ive had a 2016 rspec, 60k miles for almost a year not a single issue, thats why the sell price on them has gone up so high theyre such good cars
FUCKING GANGSTER! GONNA LOOK FRESH AS HELL PAINTED!
I love yo genesis but how much did it cast and like where if it was dealer or no ☺️☺️cause I want a genesis so bad
I got mine used from a dealership for $10K at the time
@@CynthiaCzikall I paid 25k for 2016 ultimate . 58k Miles . How much did you spend in total ?
I've seen a purple'ish widebody rolling around olympia, is that you?
Tips on getting the sideskirts to clip in?
Mine didn't clip back in either LMAO :/ I have them zip tied, going to address the issue more once I get aftermarket side skirts that cover the whole rocker panel
@@CynthiaCzikall yeah keep me posted.
@@CynthiaCzikall hit me up on IG and dm me. Would love to talk about your build with you
Whats ur exhaust set up?
in this video it was the isr race catback and isr 3in. test pipes, it’s changed since
How much was the kit? 🤩
$900-$1000 they don’t sell it as a full kit now unfortunately the front fenders and rear panels are separate sets monsterservice.pro/catalog/wide_body_kits/hyundai/genesis_coupe/
Omg finally car looks so goooood what year is it
armando sandoval 2011!
Cynthia Czikall auto or Manuel? And I’m looking for a 2016 ultimate do you think it’s worth getting?
armando sandoval Manual. And I love the car!
Cynthia Czikall does it give you a lot of problems or what’s the main issue about them
@@armandosandoval7297 I've had mine for about 8 months now and haven't had any issues and have zero complaints. I absolutely love this car!
I really want this kit, but new to the process 😅. Why did U have to weld that part for the rear? Why not cut it instead? Is it because it’s too hard to cut off?
BoostedSamuari we welded/sealed that area because if it were to rain, water would get inside the car and possibly the trunk as well. Keeps it sealed off from the elements. And we folded the flaps up instead of cutting them off so that we would have minimal holes to seal up!
Cynthia Czikall ahh I see. Thanks for the reply !!
what's the wheel specs?
19x9.5 +22 with 20mm spacers (I now have 32mm though), and 19x10.5 +22 with 38mm spacers
Cynthia Czikall so what I have is 19x9.5 22 front and 19x10.5 22 rear so I need the same as you for spacers? Just to make sure
John Delpriore Yes! I will be posting more photos on my instagram soon as well with the new 32mm spacers so you will be able to see the new front fitment (just under flush). But rear with the 38mm is pretty flush. You could go bigger with 38mm in the front too depending on how much camber/wheel poke u want to run!
Cynthia Czikall perfect I’ll be watching. If you can make a video too!
Could I possibly buy or get those spacers you’re taking off your car? I just got a rocket bunny kit but the rear is a 75mm extension
What wheels you got?
ESR SR05’s
Exact size you got them? Love these wheels
No side skirts? 👀
What color silver is that on yiur genesis that shit hard
Its called Nordshleife Gray!
Cool 👍😁🤜🤛
We have the same car ang same color!😊bk1😍😍😍
쿠페 튜닝. 이쁘네요
You’re 😍
Ok look we don't know each other but we can change that. How about we get to know each other over a bowl of fruit loops.
You are so cute 😍