... My bike has brass spacers that I think are grinding into the fork itself because there is a ever increasing gap?..... Put in some plastic washers for now..... The spacer in between the bearings is still is still there So I know the bearings are not collapsing towards each other... Does this sound normal?
Hi this don't sound normal. On the front wheel you'll have the bearings and spacer . Then when you put the wheel on you should have 2 wheel spacers that go between your dust seals and forks and that is it for spacers .
By the looks of your short you have a different spindle to the one on my bike , mabey a previous owner has put the wrong one in . Might be worth looking for a new one
love your videos bro! i have the same bike too
great video mate, Total noobie here, so was easy to follow and understand 👊😀
Thanks for the feed back ! I do try and keep the videos simple and to the point with enough info to be able to do the job .
... My bike has brass spacers that I think are grinding into the fork itself because there is a ever increasing gap?..... Put in some plastic washers for now..... The spacer in between the bearings is still is still there So I know the bearings are not collapsing towards each other... Does this sound normal?
Hi this don't sound normal. On the front wheel you'll have the bearings and spacer . Then when you put the wheel on you should have 2 wheel spacers that go between your dust seals and forks and that is it for spacers .
@@F15hlermoto
th-cam.com/users/shortsqkrzj5ffFIc?si=hCFo6W7oIJhYRHAJ
@@F15hlermoto ... The axle is also smaller than the holes in the fork And the whole wheel can go up and down If your front wheel becomes airborne..
By the looks of your short you have a different spindle to the one on my bike , mabey a previous owner has put the wrong one in . Might be worth looking for a new one