Replace Bellows on Needle Sinker bar Tricot Warp Knitting machine warping machine Karl mayer 트리코트 경편

You can view subtitles translated into your language by selecting Subtitles in TH-cam Settings.
warp knitting tricot machine.
TH-cam 자막 설정을 선택하면 원하는 언어로 번역된 설명을 볼 수 있습니다.
Description based on Karl Meyer HKS 3-M, Knitting Motion 2021.
Damaged bellows are replaced as follows:
Before replacing the bellows, place a marking above the hose clamp in order.to bring the new bellows into their correct position.
1. Push rod should be in its highest position.
2. Loosen the hose clamp.
3. Remove the clamping ring.
4. Push the bellows upwards.
-5. Loosen the cap nut.
6. Remove the bellows in downward direction.
Mounting of the new bellows is done in reverse order.
Important:
When fixing the hose clamp be sure that the bellows are not fully extended in their travel,
or respectively, that the folds are not pressed together too hard.
The weld seams of the bellows should be aligned parallel to the lengthwise d'irection of the machine.
When readjusting the knitting levers, it might be necessary to remove the bellows.
Be sure that the folds do not show any bends as otherwise their durability will be reduced nsiderably and no guarantee can be assumed.
thank you

[@sajumia9996]

How to calculate any Mesh Fabric CPC and walls.

[@WarpknittingTechniques]

We will try to create content based on the ideas you suggested.

[@mueshkumar9347]

I am opreter master this machain work job avilebal sir

[@WarpknittingTechniques]

You have great abilities. I hope many good things happen.

[@deanhackett349]

Why not install the hose clamps facing you so you don’t have to tighten them up from the back?
Surely it’s far easier and should not have any effect on the performance and reliability of the bellow.

[@WarpknittingTechniques]

That's a good idea.
The machine manufacturer is set up to work on the front of the machine.
This video was filmed behind the machine for convenience of work.

[@gangashah391]

Please sir time setting video

[@WarpknittingTechniques]

We will check and reflect the time setting method.

[@jayramparsad3021]

Very good video sir ji ❤

[@WarpknittingTechniques]

thank you

[@azharulalomgir5727]

Dear friend after a long wait I got a new video from you, thank you, hope you will give more new videos in the future.

[@WarpknittingTechniques]

Thank you for always showing interest and encouragement.

[@sajumia9996]

very instructive video Sir

[@WarpknittingTechniques]

Thank you for watching the video.