Great video. I have a 1000watt drill just lying around that I don't use much. And I will purchase a table saw soon. This will make a great project. Of course I don't intend to copy your design 100%. I will make some variation due to my beginners level of skill and what tools I have at my disposal. Nice Fixman clamps. I own a couple of them.
Hi, Nice work. I would like to ask if all the measurements are in inches, cm, or mm? Also, If you could perhaps describe the gear you used for the project and the parts name ... perhaps it would be easy to get an idea to buy them for hobby DIYs people.
Very good build. Have you got any ply due to usage of the drawer slides. I tried. It has lot of sideways ply. So I am altering with some strong side supports to nullyfy sideways ply..
Hello, very good job, it is perfect from all a great 🤙 only one question, it is possible to upload the plan with the metric measurements, greetings from Spain
Boleh jadi asas next project saya. Mungkin heavy punya type, sbb saya ada motor yg berat, tork kuat tapi bukan kelajuan. Kena tambah speed controller kot
That wood putty trick was awesome!! 👍👍👍
@@swcre8s thank you
Thank you 👍
Your welcome
thanks for sharing, God bless you
Thanks
Sebiji jsk.. terbaik bro! Proud sabahan 👍🏻👍🏻👍🏻👍🏻👍🏻
T.kasih bro..sabah buli bah😎😎😎
Very good workmanship!!
Thanks
Wonderful design and great that you share you plans but it would be be so much better of to have an actually cutting list of the various pieces.
Terimakasih videonya kreatif 👍👍
Sama2
Sae ,, resik , rapi & dak asal jadi
Matur nuwun video ne
Makasih
nice thank's for tutorial
👍👍👍
Terbaik..👍👍memudahkan kerja utk mendpatkan ukuran yg tepat.
Tq
Very nice piece. Thank you for the plans! I will use this for sure. Thank you for your generosity and sharing your skills.
Your welcome
Thanks for sharing
Your welcome 😃
I like your creativity, I happen to want to make a tool like that and I will follow the method. thank you
Thanks
Great video. I have a 1000watt drill just lying around that I don't use much. And I will purchase a table saw soon. This will make a great project. Of course I don't intend to copy your design 100%.
I will make some variation due to my beginners level of skill and what tools I have at my disposal. Nice Fixman clamps. I own a couple of them.
Thanks for your comment..just download the plan on my description and you can modified if you want
Yes downloaded already. Thanks.
Merci beaucoup pour la vidéo
This Drill Press build is the best I've seen on TH-cam.
Thanks 👍👍👍
Excellent and great job. Good finishing.👍🙏🇮🇳
Thanks
Hi, Nice work. I would like to ask if all the measurements are in inches, cm, or mm? Also, If you could perhaps describe the gear you used for the project and the parts name ... perhaps it would be easy to get an idea to buy them for hobby DIYs people.
de lo mejor que he visto muy profesional ... felicitaciones
English please
Terbaek wan...luar biasa...
Luar biasa ah..
Mantap..👍👍👍
Apa y mantap boss?
Very good build. Have you got any ply due to usage of the drawer slides. I tried. It has lot of sideways ply. So I am altering with some strong side supports to nullyfy sideways ply..
terima kasih plan nya mas .... tinggal menambah ukuran kedalaman mata bor
Sama2
Muito bem gostei 👍
Thanks
Hello, very good job, it is perfect from all a great 🤙
only one question, it is possible to upload the plan with the metric measurements,
greetings from Spain
Not possible
Bisa jadi referensi ala JSK Koubou nih wkwkwk
T.kasih...udah subscribe belum 😂😂😂
Espectacular!
Gracias
Muito bom gostei 👍
Tank you 👍👍👍
Q buen trabajo, amigo esas medidas q pones como se hace para pasarlas a mm?
Mantapppp Wan....
Mantap
Tq ji
Tq bang
@@planetkayu-wanwoodcraft5520 kurang asam ko Wan..
@@MFICHANEL hahaha
do you have an item list for this build. I.E. the rolling rails, springs, lower rail with the lock down arm
I have no list..but all item I by from shopee..some of item I just find at hardware.
Pak bos bisa g pesen seprti ini dn brpa harga nya pak bos.. sy minat
@@CHANDRA3337-k6d ngam jual ya..cuma sebagai hobi
Hello. Can such a bench drill be used to drill 5mm steel?
Not sure about that..you better buy a actual drill press for heavy work.
Boleh jadi asas next project saya. Mungkin heavy punya type, sbb saya ada motor yg berat, tork kuat tapi bukan kelajuan. Kena tambah speed controller kot
Nice tuan...
Video moves too fast to actually be helpful.
Um belo projeto, mas coloca o plano com as medidas em porra de polegadas. Nem todo mundo entende isso.
👍👍👍
👍👍👍
Itu apa nama bahanny bang yg d bentuk dan d taruh d atas bornya lalu menjadi padat?...
Makasi bang
Gam Epoxy bang
Medidas?
njiplak oleh gak bro
You copy this to JSK Koubou???
No..so many youtuber on youtube build this drill press..JSK is not first person build it.
Bisa dicontoh nih buat duduksn bor tangan
Boleh..silahkan
I found great plans on the Stodoys website. I think this is a good solution for everyone.
ada
Ada apa?😂😂😂
Did your moma teach how to talk when you were a baby?
Mr bean also don't talk right?..but you still loughing when watching his video..
@@planetkayu-wanwoodcraft5520h
...