love the vids,yall do practical mods tha people want to do to Their cars.when you do it you give the best step by step with detail instructions. JUST AS GOOD AS MCM
Keep up all of the great work 👌🏻
Thanks for linking to the part on Amazon. Definitely gonna have to do this!
Yo, you guys are putting out great content. Keep it up pls cuz i have an e92 n54 aswell
Great job! Big like guys 😎
you should wear some type of eye protection when doing all this .... at least when upside down underneath the car
Good review man :)
great channel!! you guys should do a video of all the mods of the car, what wheels you have ?
I have a e60 n54 what size pipe should i get the cut out?
man id love to see more fbo type n54 vids and maybe some cheap cosmetic stuff
be cool to see on a 55 cause im thinking of doing this to mine
finaly im more then sure to do same exhaust mode... thanks lads
The link you posted to the Cutouts is not longer available. Do you by chance remember the brand or is there one that you'd recommend? I keep running into the brand QTP but I'm not seeing a dual kit.
What cutouts did you use? Link?
Where can I buy them? The link isn't available on Amazon nomore
Hey, just wondering how these are holding up as i am in the market for some cut outs and these are like 1/3 the cost of QTP's. any issues with the motors or sealing or anything like that?
That sounds very sick! Cool mod. BTW,
Where did you get those hydraulic lifts/ramps?
Cool mod!
How have they held up? Still work fine?
can someone send me a link to the product. the one in the description doesn't work.
Where did you get the hydraulic lifts?
is there any horse power loss/gain with this mod? or is it all esthetic/sound
How are you doing I’m very late but what’s the link to find the cutout used keeps saying page not found looking for good cutouts
They amazon link to the cutouts expired can you tell me what you typed in to find that?
Found your channel last night its fahkin MINT
Any power gain or lost.
Deff getting this done to my 335 shit sounds insane
Darius Doway did you get it done. Did you have a muffler shop do it? How much did they charge?
Does that increase power?
What lift is that?
Anybody know the link to buy this ?
Any power gain
Hey bro I got a e90 335i I’m just wanna know does the cutouts scrape at all I went to 3 different muffler shops and they all told me it’s would scrape or they don’t see a good place to put it please lmk bro
Panda Panda so the exhaust setup may be different on the e90 because the way we angled the cutouts they don’t scrape they barely even sit lower then the exhaust, but again I don’t know the e90 exhaust layout so they might be right there might not be a way, I just know that the way we angled these on the e92 was mint and doesn’t scrape
Is there any way you could do this or something similar that doesn't require welding?
Garo Barsemian yeah, just cut the exhaust off and enjoy ...... you scared pussy?
awesoooome
I know this isn't related to this video but what you have done to the exhaust on the E46? It sounds really cool! Keep up the amazing content!
abdelrahman amer we'll be doing overviews of each car soon so stay tuned!
What size was the valve kit? I see them being offered as 2.5 inch and 3 inch. Believe the 335i exhaust is 2.36 inch?
hows this holding up after a few years?
Excelente
Does anyone have an MHD n54 e90 automatic stage 2 they can send my way? I can send it back once I get it done lol
Did you do a cat Delete?
Link to the part ?
cool vid.. what air jacks are those ?
pennypacker2000 yeeeeeeees plz what are they?? didn't even know they existed until this video lol
Damn I haven't had a burger in a year now you make me want to go get a burger that's a nice hamburger
Hi! I write from Spain. I have 335i e93 and I want this mod. What diameter I need? 2.5" tube or 3" tube?
Thanks!
@@BudgetBimmers also found these exhaust cutouts on alie Express. But they also give the option for 2.25 inch. I believed an e92 335i exhaust was around 2.34 inch. So I need 2.5 or 2.25?
Fucking bad ass! You guys putting work! Great vid
Do they both open with one remote? Or do you have to push two different remotes?
Wholly shit, how is this a question? Do headlights have two switches for left and right?
Hi would this pas the emisión test? From ct USA
You leave them shut and it’s stock still. No issues. Also mufflers do not effect emissions, only sound
Great video, got quoted $2000 aud to get this done on my n55 335i. Was just wondering how did you guys do the wiring ?
orhan cirak this particular kit plugged in to the 12volt cigarette lighter, so you can see in the video how we connected them above the exhaust then ran it through the trunk and then into the cabin to the 12 volt not too hard
Is this bad for the stock engine/stock tune. Is it bad for the car to suddenly have almost no more back pressure in the exhaust? Thinking about doing this to my 328i xdrive. Someone please speak about this:)
Not on a 335i because of the twin turbo setup, a 328i is NA so it needs the back pressure
sounds better than straight piped
very cool. $159 bucks plus labor. sweet
What size piping did you order ?
it's 2.5 inch .You can choose the exhaust cutout depends on your car's exhaust pipe outer diameter .
Hey did you guys order the 2.5 inch or 3.0?
it's 2.5 inch in the video , depends on your car's exhaust pipe outer diameter
Hello, we are the manufacturer of the EVIL ENERGY brand.
I saw your video showing our products. Are you interested in working together?
Here's EVIL ENERGY New Improved Exhaust Cutout : www.amazon.com/EVIL-ENERGY-Electric-Exhaust-Catback/dp/B07Q3KYFKN/ref=sr_1_fkmrnull_1?keywords=exhaust+cutout+evil+energy&qid=1556158278&s=automotive&sr=1-1-fkmrnull
The exhaust cutout we sold before are all removed . Now we're back with New which improved
1:50 had me lolin btdt.
will this pass smog LOL
How can i have all these burbles😍?!
2 things 1st invest in reciprocating saw 2nd that weld isn’t a guarantee
szuper☺☺☺BMW☺☺👍👍👍👍👍👌👌👌👌Hungary☺☺☺☺
Stock or catless downpipes?
Bobby stock downpipes, catless downpipes install on this car coming soon though
Bobby for sure man! Gunna go from quiet to a beast with the push of a button, we can't wait
C’est mieux d’avoir une ligne inox complète.
Should go open dump on the Single jingle 335
You should do hood exhaust for the single turbo 335i like straight out the turbo
I think a bird shit all over your welds. Good god man use Argon not flux core.
The cutouts are sick, I've got them on my old hot rod and it's hard not to leave them open all the time. Might put them on the 335 right after the downpipes. Is there enough room up that far is the question.🤔
lakebum7425 yeah there is that's my car in the video. I would have put them up there but I felt it would have sounded so loud in the car and I'd rather have the sound more behind the car instead over right under the middle.
His channel is called budget bummers I'm pretty sure he can't afford the expensive machinery like argon.
So much bruh.
swear to god i was with this guys brother in the Army. know a ortiz (my friends last name) ?? looks like the guy with blonde hair
Where's old mate? Not working on other people's cars?
wire it so that when you put the car into sports mode it automatically does this. A lot cleaner and more professional you know.
You all look like different variations of mr beast
I want to tell you guys that I'm super happy for you! Obviously you have a superb work ethic and I wish you much good fortune! Thank you for these great vids.