Hey Jimbo. Why is it none of those guys all loving your work don't ever bother to click LIKE? Your work is always perfect in so many ways. I guess I will continue to watch and wish. Thanks.
I'm a gate builder myself for about 10 years now. I can't stress enough to get away from those types of hinges. The way they are built they wear down. Please look at Barrel Pin hinges. They last 100x longer than normal/heavy door style hinges. The barrel pin hinges have a grease fitting for service. Not to mention they can handle the weight gain of the gate when the wood soaks up water from a nice rain. Great videos too!
I started doing gates a year n a half ago and thank God for TH-cam, I watched a few of your videos and still to this day mount my wood into the gate as you do. A very smart way to build and especially for the homeowner's. Keep the videos coming...
@@rojasluis5882did you ever find out? I am building a gate and I want to use T&G wood but only one that I can find is the shiplap at Home Depot/lowes I don’t know if that would be a good choice for the outside weather.
As many gates as you do, get a roller. SWAG Off Road is the one I have and it works great and is not too expensive. Their dies are the cheapest of any and that's where the money gets expensive. I have several curved pieces I cut on the CNC plasma table that I use as a template guide when rolling the steel. That's the secret as you can easily tell when you've rolled it to just the right curve. Make several passes with the roller to get it to just the right curve. That way, the gate always ends up matching my drawing. I cut the templates from 10ga steel - about 36"x4" where one of the long sides is cut to the curve I need. I cut letters into the template indicating what radius they were made for. When I do gate tops, I often design them to fit one of the templates I already have cut. And BTW, nice work and what a clean and neat shop you have!
Awesome gate. What is the radius on the top pieces? Do you have a video of complete install of lock box, with knob and dead bolt? What needs to be done on receiving gate?
Right on Jimbo! When I build mine I usually build my frame as one piece then cut them apart at the center. Nice to see other ways of doing it. Nice gate!
Nice, just a few months ago I built a gate almost the same except the arched top above. I've been looking for a video like yours for inspiration, but it's good to see it right now. I see you used argon, I used arc welding that makes life harder and I do not recommend. Greetings from Romanina and thanks for the video!
Glad to see those guys all wrapped up. I get nervous too with corner flex on big hanging pieces like this. Whenever I have some dead space in a sheet of steel on the plasma table I cut gussets from it, so I have a big pile of them to pick from to stiffen things up. Better over built than re-built, eh?
That's a nice looking gate you talk about the 16gage I hate it I rather use 14 but sometimes I have to use it when I do I use 5/64 rods I get it at some welding supply stores home depot don't carry them I like the way you set the wood in pretty neat
Nice project Jimbo. I want something like this at my house but about a 4 meter opening (13ish feet) with horizontal slats and just a plain old rectangle. Always a pleasure getting a jimbo vid popup. Have a good one mate!
fantastic looking set of gates jimbo,can appreciate your work even more,when we can see fixed on site,its great to have a true friend like that............all the best................dougie
I was wondering if you could answer a couple questions for me, what dimensions do you send to your metal supply to get your radius bends and is it pretty pricey?
I just copied this gate and a shop wanted to charge me $100 buck for each roll. I just ended up making a jig radius and heated up the tube square and it bends nicely
THANKS FOR POSTING THESE GREAT VIDEOS, YOU HELP ME OUT FIGURING OUT HOW TO REBUILD MY FENCE AROUND MY HOME AFTER MARIA TORN IT DOWN WITH TREE BRANCHES THAT WEIGHT UP TO 100 LBS THAT FELL ALL AROUND , STILL HAVE TO REMORE A BIG PINE TREE BELIEVE IT OR NOT WE HAVE THEM HERE TOO, KEEP THE VIDEOS COMMING , THANKS AGAIN
I cannot find the metal site you mentioned in this video. The one I did find only listed 4 ft pieces. Did you wield them together to get the length you used?
Hey Jimbo. Why is it none of those guys all loving your work don't ever bother to click LIKE? Your work is always perfect in so many ways. I guess I will continue to watch and wish. Thanks.
I'm a gate builder myself for about 10 years now. I can't stress enough to get away from those types of hinges. The way they are built they wear down. Please look at Barrel Pin hinges. They last 100x longer than normal/heavy door style hinges. The barrel pin hinges have a grease fitting for service. Not to mention they can handle the weight gain of the gate when the wood soaks up water from a nice rain. Great videos too!
Is a Barrel Pin hinge the same as a Bullet hinge? Can't find anything called a Barrel Pin?
I started doing gates a year n a half ago and thank God for TH-cam, I watched a few of your videos and still to this day mount my wood into the gate as you do. A very smart way to build and especially for the homeowner's. Keep the videos coming...
Hey Henry, what type or kind of wood you used?
@@rojasluis5882did you ever find out? I am building a gate and I want to use T&G wood but only one that I can find is the shiplap at Home Depot/lowes I don’t know if that would be a good choice for the outside weather.
As many gates as you do, get a roller. SWAG Off Road is the one I have and it works great and is not too expensive. Their dies are the cheapest of any and that's where the money gets expensive. I have several curved pieces I cut on the CNC plasma table that I use as a template guide when rolling the steel. That's the secret as you can easily tell when you've rolled it to just the right curve. Make several passes with the roller to get it to just the right curve. That way, the gate always ends up matching my drawing. I cut the templates from 10ga steel - about 36"x4" where one of the long sides is cut to the curve I need. I cut letters into the template indicating what radius they were made for. When I do gate tops, I often design them to fit one of the templates I already have cut. And BTW, nice work and what a clean and neat shop you have!
Awesome gate. What is the radius on the top pieces? Do you have a video of complete install of lock box, with knob and dead bolt? What needs to be done on receiving gate?
I had that problem
The gate is very pretty. Congratulations. Greetings from Poland
If in the future can you show the install I would love to see that on the gates.
Great deal. Just right size for us. Wish we had bought one sooner.
Holy moly you made that look easy.
I wish I lived in your neighborhood. I'd be that aggravating kid always hanging around. "Whatcha working on Mr. Jimbo ? Can I help ?"
MrTonythetiger91 🤣 me to!!!
Great work jimbo, you should do a video on installing these gates.
Jim, your designs are getting better the more you do. Nice gate and it really looks sharp. Keep them coming.
Right on Jimbo! When I build mine I usually build my frame as one piece then cut them apart at the center. Nice to see other ways of doing it. Nice gate!
Another great job.
Very very nice indeed
AWESOME! NICE LOOKING GATE..LOOKS VERY STURDY!
Nice, just a few months ago I built a gate almost the same except the arched top above. I've been looking for a video like yours for inspiration, but it's good to see it right now. I see you used argon, I used arc welding that makes life harder and I do not recommend. Greetings from Romanina and thanks for the video!
Glad to see those guys all wrapped up. I get nervous too with corner flex on big hanging pieces like this. Whenever I have some dead space in a sheet of steel on the plasma table I cut gussets from it, so I have a big pile of them to pick from to stiffen things up.
Better over built than re-built, eh?
I have the sudden urge to go build an RV gate! LOL Great Video!
I am completely impressed with the quality of each project!!
Awesome Job jumbo
Beautiful Gates
That's a nice looking gate you talk about the 16gage I hate it I rather use 14 but sometimes I have to use it when I do I use 5/64 rods I get it at some welding supply stores home depot don't carry them I like the way you set the wood in pretty neat
I love your jobs watching all time jumbo you good
Beautiful gate, Jimbo.Well done. 👍🇺🇸
Thanks Chris, Jimbo!
Looks beautiful
Great video. Gates came out awesome. Just hope no one parks too close to them.👍🏻
Beautiful work, and so nice to have your friend around.
Best regards.
That's an awesome gate, great attention to detail. Thanks for sharing
LOOKS BEAUTIFUL, AWESOME JOB!!!
Really nice Jimbo! I always liked the look of black steel and wood together. Great design.
Thanks Brian, Jimbo!
Jimbos Welding Toyland again, Thanks Jimbo.
Классные видео!!! Отличный инструмент и руки золотые))
Nice project Jimbo. I want something like this at my house but about a 4 meter opening (13ish feet) with horizontal slats and just a plain old rectangle. Always a pleasure getting a jimbo vid popup. Have a good one mate!
Thanks for watching Troy, Jimbo!
Looks GREAT!!!
Super nice!!!👌👌👌👌.
This video should have 2k likes by now atleast
Thanks jumbo awesome job
Nice looking gate.
Your table is bad ass!
Great video. Nice gate!
Looks Great. I might have to build something like that for my house.
fantastic looking set of gates jimbo,can appreciate your work even more,when we can see fixed on site,its great to have a true friend like that............all the best................dougie
I need some one in Trinidad
Wow, that might be the most beautiful gate I've ever seen! And your craftmanship is amazing! Very inspiring, thanks for sharing!
I was wondering if you could answer a couple questions for me, what dimensions do you send to your metal supply to get your radius bends and is it pretty pricey?
I just copied this gate and a shop wanted to charge me $100 buck for each roll. I just ended up making a jig radius and heated up the tube square and it bends nicely
Great video man. Wanted to ask if you have a video of the actual hanging of the gate like when you welded the gate to the post.
Great looking gate.
Thanks Wayward. Jimbo!
JIMBO. PLEASE DO ME A FAVOR. CAN YOU ASK PAT WHAT COLOR STAIN THIS IS. THANK YOU. LOVE ALL YOUR VIDEOS BY THE WAY. ALWAYS LEARNING SOMETHING NEW.
Yup need to know what stain it was too.
Love it, Very inspiring!
Beautiful gate Jimbo, I'd love to have your skills. Keep up the great work my friend.
Great job, what is the radius that you used? What kind of wood you used?
THANKS FOR POSTING THESE GREAT VIDEOS, YOU HELP ME OUT FIGURING OUT HOW TO REBUILD MY FENCE AROUND MY HOME AFTER MARIA TORN IT DOWN WITH TREE BRANCHES THAT WEIGHT UP TO 100 LBS THAT FELL ALL AROUND , STILL HAVE TO REMORE A BIG PINE TREE BELIEVE IT OR NOT WE HAVE THEM HERE TOO, KEEP THE VIDEOS COMMING , THANKS AGAIN
Thanks for watching, Jimbo!
Wow Jimbo
Holy shit that gate GORGEOUS
You are amazing, one more time a beautiful job, congratulation!
You are the best! 👍👍👍
you make look so easy...thanks for sharing
Love that gate. Want to build one for my place in a couple yrs
You know your stuff, thanks for sharing your knowledge Sir.
Great looking gate Jimbo, I really like the design and build! 👍👍
Beautiful Gates Jimbo
Great job awesome vid!
Good job and look nice.
First time I see one of your videos Jimbo, thanks for sharing your techniques. Great camera angles and really well explained! 😉
Nice beautiful art work,
What size length and thickness post you used to hold gate up
Great Job, love the design. I'm about to build a similar gate. What is the radius you had the top pieces rolled to?
and i love your welding table
Thank you for making the vid! Was the wood presloted or did your buddy buy it like that? I like how they fit together so easily!
home depot has it, called tounge and grove, i believe pine.
Да с таким оборудованием ,одно удовольствие работать
попробуй с нашими зп соруди такую мастерскую!)
Nice door. Barell hinges are great too.King metal has lots of them. Luckily there is one 15 min from my house
Can you make a video on how you put the door handle on?
love this gate. wish I could afford something like this
Pat sure like to screw around alot :o)
Great looking gate. Love it. Congrats to the own and maker ;o)
Great gate, good skills.
Great video. Thanks.
You're the man sir.
What thickness for the 1x2 do you recommend? Also do you recvomend using a 4x4 steel post to mount gate to? If so what thickness? Thank you!
I cannot find the metal site you mentioned in this video. The one I did find only listed 4 ft pieces. Did you wield them together to get the length you used?
What type of wood is that? How wide and tall is your gate?
Looks awesome Jimbo, great job! 😃👍🏻👊🏻
Nice!
nice work!!
Que clase de madera pusistes ? Bonito trabajo
Nice gate bro
Any suggestion on how to cover a sheet metal gap from frame
What kind of paint did you use?
Brush, rattle can, or sprayer?
Thanks for watching, Oil base sprayer. Jimbo!
what a gorgeous stunning looking gate!!! love it!!! :)
I see Jimbo, I'll give it a thumbs up 😉. I would like to have a hobby room like you have..
Great job!
Thanks for watching! There is a lot of good ones out there. I like HTP you can go to usaweld.com and check them out. Jimbo!
JIMBO'S GARAGE thanks Jimbo!!
Love your videos man, what is the ratio for the bending part of the fence? Thanks man!
Beautiful
What size steel square tubing is a good to use as a good rule of thumb? Is the .06 ok or to thin?
Wow i love how the gates looks and i love when you combain wood and steal design
Thanks for watching, Jimbo!
Love the Swagoffroad table........nice.
very good, good job!
Nice job! I like the arch at the top.
Nice!!!!
Excellent work! Any idea what the radius of the bend in the tubing is? Enjoy the videos!!
Awesome work !
Have you used any barrel hinges? I heard you mention them in this video. I have some questions I need answered if you could help out. Great videos
Amazing work...ciao
Nice👍