2009 2010 2011 2012 2013 2014 Acura TSX Amplifier Upgrade - ELS Amplifier Bypass - DIY Pro Series #3

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 ต.ค. 2024
  • If you want to upgrade the amplifier in your second generation Acura TSX you are going to want to check out this video. We cover almost every scenario you can think off when upgrading your amplifier.
    You can find our products down below.
    T-harness with LOC - mobilemaxcarau...
    Premium Sound System Amplifier Bypass - mobilemaxcarau...
    ELS Amplifier Integration Harness - mobilemaxcarau...
    Premium Sound System PNP Amplifier Upgrade - mobilemaxcarau...
    Kicker PNP Subwoofer Upgrade - mobilemaxcarau...

ความคิดเห็น • 27

  • @AcuraAudioGarage
    @AcuraAudioGarage  3 หลายเดือนก่อน +1

    You can find our products down below.
    T-harness with LOC - mobilemaxcaraudio.com/product/honda-acura-sedan-universal-subwoofer-amplifier-t-harness-loc/
    Premium Sound System Amplifier Bypass - mobilemaxcaraudio.com/product/2009-2010-2011-12-13-acura-tsx-amplifier-bypass-non-navigation/
    ELS Amplifier Integration Harness - mobilemaxcaraudio.com/product/2007-2008-2009-2010-2011-2012-2013-acura-tsx-amplifier-integration-harness/
    Premium Sound System PNP Amplifier Upgrade - mobilemaxcaraudio.com/product/2004-2005-2006-2007-2008-acura-tl-pnp-amplifier/
    Kicker PNP Subwoofer Upgrade - mobilemaxcaraudio.com/product/acura-tl-tsx-ilx-tlx-kicker-8-subwoofer-factory-replacement-package/

  • @Navitech_LisaPeng
    @Navitech_LisaPeng 3 หลายเดือนก่อน

    You are pretty professional.

  • @Kylethemestupfile
    @Kylethemestupfile 3 หลายเดือนก่อน +2

    Time stamp where the dogs appear is 41:01
    Just for future reference, for the power wire from the battery, there's actually a hole in the frame rail that leads right inside the cabin just to the left of the brake pedal. I successfully ran a 4AWG wire through it, I bet you could fit a 0AWG with a little extra effort
    I'm confused about your t-harness connections at 18:30. One channel connected to a full range signal and the other channel connected to a subwoofer that I would assume is getting a higher power signal than the full range. Can you make that make sense to me? I mean I suppose the dub amp is filtering out the high levels, but then why even hook up a high level in the first place?

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน

      what harness would you like? Also could you send some photos our way of the location you are talking about. We would love to show everyone a way without having to drill any holes. Thank you for the feedback.
      As for the signal of the rear speaker and subwoofer you are right. But there are some circumstances where someone might want the crossover higher than the factory subwoofer is at. So if you send both signals you can decide where the crossover point is.

    • @Kylethemestupfile
      @Kylethemestupfile 3 หลายเดือนก่อน

      ​@@AcuraAudioGaragewhat exactly are my options for the harness? I was planning to order from you at some point. I have a 2012 tech package wagon. Was going to go full aftermarket and use the jbl 8 channel you have on your website.
      I did consider the crossover frequencies. I am still curious as to the differences in power since i'm sure the subwoofer gets a higher power signal than the full range. Would the aftermarket amp level the two inputs?

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน

      @@Kylethemestupfile You want the ELS integration harness. JBL amp is great but not super loud.
      That is a great question and my assumption is the line-out converter circuit does level them both out but I would need to test it. Also in our video we didn't set our crossover over 100hz so if the higher end signals were louder we did not hear them.
      I will do a test and let you know. The harness you will use won't have this issue because it plugs in at the amp.

    • @Kylethemestupfile
      @Kylethemestupfile 3 หลายเดือนก่อน

      @@AcuraAudioGarage it seems my last reply didn't post earlier today.
      I will gladly accept the ELS integration harness!
      Also, in response to your earlier message, I will happily send you photos of how to run the power wire. Or maybe even possibly a video. What would be the best way to communicate?

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน

      @@Kylethemestupfile yes please email us at sales@acuraaudiogarage.com with the link to video or pictures. Also please send us the shipping information so we can send the harness.

  • @justchris8442
    @justchris8442 3 หลายเดือนก่อน

    Question. Currently have 2 12's on a "1000w" amp getting the signal from the 8in factory sub by a simple non powered loc. I have your amp bypass, do I still need to wire the stock sub to the bypass or can I leave unwired? Basically can i just add 4ch amp for doors with bypass w/out messing with sub loc?

  • @anthonysilva4938
    @anthonysilva4938 2 หลายเดือนก่อน

    So I have a 2nd gen cl and after market touchscreen, I’m getting that alternator whine and tried everything so at this point I’m thinking it has something to do with the aftermarket radio not mixing with the stock 2ohm speakers. So can I bypass the amp and upgrade the speakers with 4ohm ones. It’s a boss be7acp head unit. Thanks for any help!

  • @justchris8442
    @justchris8442 3 หลายเดือนก่อน

    Def ran my power wire thru grommet and up passenger side. Zip tied fuse to strut bar. Had enough wire from amp kit.

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน +1

      @@justchris8442 did you leave the grommet half sealed or poked a hole in the factory grommet? The suggested length from the batter to the fuse should not be over 18 inches so be careful but as long as everything is secured you are good.

    • @justchris8442
      @justchris8442 3 หลายเดือนก่อน

      @@AcuraAudioGarage Poked hole thru grommet and sleeved 0g wire. Fuse is about 10-12 inches from battery. Thank u for the vids ✊🏾

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน

      @@justchris8442 you mind sending a link to a picture or video of your wiring. We want to do and updated video to show people other options cause drilling isn't always the easiest for a DIYer with limited tools.

    • @justchris8442
      @justchris8442 3 หลายเดือนก่อน

      @@AcuraAudioGarage Tried to won't upload 🤷🏾‍♂️ but just like u explained in the latest vid, it right under glove box and behind the carpet. Kept under carpet and was able to run it directly under side paneling.

  • @joshuasavage7859
    @joshuasavage7859 27 วันที่ผ่านมา

    wheres located the factory amplifier for the 2012 acura tsx

  • @jdmlifestyle5499
    @jdmlifestyle5499 3 หลายเดือนก่อน +1

    Could have used this video months ago 🤣

  • @dnareti
    @dnareti 3 หลายเดือนก่อน

    Is there an amplifier bypass for the 4 gen Tl ?

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน

      Yes we have it for the base and the same integration harness for the ELS

    • @dnareti
      @dnareti 3 หลายเดือนก่อน

      @@AcuraAudioGarage ok I have the technology package

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน +1

      @@dnareti you can follow scenario 5 its the exact same as the TL. Here is the link for the integration harness. mobilemaxcaraudio.com/product/2007-2008-2009-2010-2011-2012-2013-acura-tsx-amplifier-integration-harness/

  • @ChinoBinFishen
    @ChinoBinFishen 24 วันที่ผ่านมา

    I Hope I Wire This Shit Right I Just Bought The T Harness

  • @justchris8442
    @justchris8442 3 หลายเดือนก่อน

    41:07 the 🐶🐶 appear. 2011 Acura TSX V6. 2 Skar audio aftermarket amps will be installed.

    • @AcuraAudioGarage
      @AcuraAudioGarage  3 หลายเดือนก่อน

      do you have navigation?

    • @justchris8442
      @justchris8442 3 หลายเดือนก่อน

      @@AcuraAudioGarage No navigation. Still debating on replacing factory radio. Dislike the delay in Bluetooth from phone. Premium system. Also trying to add rear door speakers. ✊🏾