Very good to know these simple formulas, especially if using for diesel fuel. number one you don't want to foul your fuel pump nor cause any internal wear, but also keeping your injector tips as clean as possible for as long as possible is the trick to engine longevity. New standards for today's fuels remove too much sulfur from the diesel, causing fuel pumps in older diesels to wear out too soon, so formulating the fuel to the age of ones engine is important. Thanks for another good one, Alek. If you wrote a book I'd sure buy it.
The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
You need to neutralize sufuric acid by sodium hydroxide solution, then to wash with water-ethanol solution to remove sulfonic acid (sodium sulfonate salt) produced by the process
Yes, you have to neutralize it, in my case I do baking soda instead, it is alkali but not so aggressive as hydroxide, after that, you still need to use a bit of absorbent and if doubtful, run the copper strip test and check the PH.
the acid will produce some sort of asid bitumen even from clear hydrocarbon, so if it is transparent but dark, the dencity is resemble the diesel fuel, no copper stripe reaction and smell is not a factor, then it can be used as is after simple silica gel settling.
I realy liked your video. You explained very well. Very informative. I have three questions if you can help out. 1. How to stabilise the Plastic pyrolysis oil. 2. How de acidified the pyrolysis oil. 3. And how to bleach the oil. Waiting for your reply sir.
Hie aleck today i tried to clean my distilled oil using this method but my resulting fuel turned out to be redish in colour not goden yellow where am i going wrong
Hi, there could be many factors, the first one is the actual distilled oil is a product of pyrolysis not a continuous distillation, so more oxidized at the start, was not settled for a few days, also you may need to settle it longer after acid reaction, plus try to reduce acid amount to 0.5%, and try to use a washing soda instead of baking one - (sodium Carbonate 10% water solution to make 10% of volume in relation to treated oil).
can you tell my how that used oil react with oxidisers? ore how is that staff viscosity made Im not shure how temperature resistance is made of oil ore their viscosity . And is it posibel chemicaly to turn that oil to diferent fuel tipes with out destiler? Im wondering because I like the idea of useing seperators for my car most clean burn I get from alcohole and I belive less polution at exaust Im not shure tought if it is posibel to use oil and alcohole together???
The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
You're great Sir! God bless you. Can I ask you if I can do this bleaching method for my waste motor oil but it is not distilled oil, it is a centrifuged oil product of centrifugation process. I don't do distillation process of cleaning waste oil. I am just cleaning my waste oil through centrifuge machine. The centrifuged oil is black, I want to bleach it to make it a little bit transparent. I saw this video and I want to try it also. I am not sure if I can do the same process with the centrifuge oil,not distilled oil. Thank you.
Hi, no it is really difficult to bleach used motor oil as such, you may try this method, but keep the oil at about 50c: th-cam.com/video/YUT4ZQMBgVo/w-d-xo.html you may make it cleaner, not transparent.
First, a modern engine will not be able to digest black diesel. Some old stationery ones will give no hack about the fuel type or quality. Second, any fine-filtered used motor oil is still packed with unburnable additives that are not so great for a fuel system. The benefit of this process is - the vehicle's engine works the same as with the standard diesel fuel, with no smoke, no coked injectors, and no busted fuel pump. Also, there is no need for a double fuel tank system to switch from one fuel to another to flush the pump and injectors before stopping or starting the engine. In other words - one can make regular diesel fuel in a backyard
شما باید تصمیم بگیرید که روغن شما چه خواصی خواهد داشت، سپس باید به اصطلاح استانداردهای اعمال شده برای هر نوع روغن را بیابید، این استانداردها خواصی را که روغن و همه مواد افزودنی باید بر حسب درصد رعایت کنند، فهرست می کنند.
@@santeryi9 All the best this Holiday Season my friend. Nephew is kicking around the island somewhere. I think everyone should have their own glassware lab (complete lab) 🙂
Good morning Sir, I try several time to clear used engine oil to clear as your method, but unfortunately I couldn't do it. I used 200mi used oil and 2ml sulfuric acid, baking soda please help me to do this properly thanking u.
Dear sir Alek polek Sir I see ur 2nd video for cleaning waist oil Sir please can u tell me ur 2nd compound what is in whit bottle I no it's ur secrets And its my request Please what is u use for 2nd ingredients Plz
Can also The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
@@santeryi9 I have a small unit in my home Means I m cleaning oil with Formic acid and bleaching earth With hot temperature Oil clean very well but oil have bad smell Im in lahore Pakistan
Yes, you have to neutralize it, believe me, the oil companies are using the sulp[huric acid to bleach the fuel, the very same one that you get from the petrol station, in my case I do baking soda, it is alkali but not so aggressive as hydroxide, after that, you still need to use a bit of absorbent and if doubtful, run the copper strip test and check the PH.
@@santeryi9 "the oil companies are using the sulp[huric acid to bleach the fuel" - no, do not use!!!! Now only a mechanical cleaning method is used! - and therefore 0.001% sulfur! Also, the use of zinc catalysts helps to neutralize sulfur in petroleum during distillation. You do not understand at all the processes of petrochemicals and alcohol distillation.
Sorry Igor, yes you are the most genius person, you know everything, about modern petrol and alcohol distillation, so please tell me if you have at least one patent in this particular field, explain about proper petroleum distillation to the person from Burkina Faso, who tries to make a little bit of fuel for his farm equipment... anyway yes you are the smart person, but honestly your Ukrainian diesel and petrol are far from perfect, In most cases it is made out of natural gas condensate, somewhere around Chernovci, and no one in Ukraine makes it the way you mentioned, moreover it is sounds like you are trying to attract attention to your channel with my help by starting a controversy, accusing me to be dumber than you.
@@santeryi9 1) I have another channel! 2) I know what I say because I was on refineries in the EU! 3) Yes I am currently in the process of patenting (4 inventions) - so I can not show the equipment! 4) It is not necessary to make conclusions on video on my channel - it is 1% of all experiments. 5) I live in Spain and I got an Immigrant start-up visa to Canada. 6) I have state support in Spain. 7) If you want to talk, then call and I will explain in detail what is the your problem....
Very good to know these simple formulas, especially if using for diesel fuel. number one you don't want to foul your fuel pump nor cause any internal wear, but also keeping your injector tips as clean as possible for as long as possible is the trick to engine longevity. New standards for today's fuels remove too much sulfur from the diesel, causing fuel pumps in older diesels to wear out too soon, so formulating the fuel to the age of ones engine is important. Thanks for another good one, Alek. If you wrote a book I'd sure buy it.
Thanks a lot for your interest, I also have videos where I use no acid methods.
Wow
The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
Thêm vào khi trưng cất hay khi đã thành dầu diesel vậy bạn
great video tutorial sir, but i want to ask about the power used in 2nd step. what is it?
The powder is baking soda.
You are great scientist mate! congrats!. I would like to learn a lot from you!
Thanks for all!
I realize it is pretty off topic but do anybody know of a good website to watch new movies online ?
@Axl Yosef Meh lately I've been using Flixportal. just search on google for it:P -zayn
@Zayn Archer Thank you, I signed up and it seems like they got a lot of movies there :) I appreciate it !!
You need to neutralize sufuric acid by sodium hydroxide solution, then to wash with water-ethanol solution to remove sulfonic acid (sodium sulfonate salt) produced by the process
Yes, you have to neutralize it, in my case I do baking soda instead, it is alkali but not so aggressive as hydroxide, after that, you still need to use a bit of absorbent and if doubtful, run the copper strip test and check the PH.
Is this oil can be used as an engien oil or as a fuel
@@housnihousni5927 diesel fuel.
@@uchennatiger4751 you knw how to refine
@@santeryi9 hello can we talk ?
U Are good
I trying at my home
Yes it's working
Bundle of thanks
Babar gill frome Pakistan
Thank you.
You mentioned it can be used as is at the start but looking at the solids that came out of it that would be a bad idea
the acid will produce some sort of asid bitumen even from clear hydrocarbon, so if it is transparent but dark, the dencity is resemble the diesel fuel, no copper stripe reaction and smell is not a factor, then it can be used as is after simple silica gel settling.
can we use the same process to remove the odor of rubber oil/fuel?
Yes sure, though experiment first.
Is the old bit of fence Stirring stick a requirement haha
How is the used engine oil distilled before adding the sulphuric acid?
Check these steps: th-cam.com/video/8gBnwAN8o_I/w-d-xo.html
@@santeryi9 Thanks. But, can I construct this myself.
great video but just one question, what do you do and how do you get rid of your waste products, surely not down the sink or in your domestic waste?
I’ve been playing with a Similar process… The waste products are burned it to create heat for the refining process
I’ve been playing with a Similar process… The waste products are burned it to create heat for the refining process
Great video sir,
But do I have to boil the oil ?, and is that sodium hydroxide?
Thanks
Ethanol/methanol+sodium hydroxide, no heating required
Wat else can i supplement baking soda with?
I realy liked your video. You explained very well. Very informative. I have three questions if you can help out.
1. How to stabilise the Plastic pyrolysis oil.
2. How de acidified the pyrolysis oil.
3. And how to bleach the oil.
Waiting for your reply sir.
Too much to answer, please send your questions to my personal box via the contact page: www.ferromit.com/contact.html
What is the white substance added to the black oil
Sodium bicarbonate NaHCO3, baking soda.
good evening a question about sulfuric acid and triethanomaline what amount was made

Hello! Would it be a difference to repeat the whole procedure with acid and soda?
Hie aleck today i tried to clean my distilled oil using this method but my resulting fuel turned out to be redish in colour not goden yellow where am i going wrong
Hi, there could be many factors, the first one is the actual distilled oil is a product of pyrolysis not a continuous distillation, so more oxidized at the start, was not settled for a few days, also you may need to settle it longer after acid reaction, plus try to reduce acid amount to 0.5%, and try to use a washing soda instead of baking one - (sodium Carbonate 10% water solution to make 10% of volume in relation to treated oil).
how much baking soda pr 1 liter?
hello friend, please could you tell me the materials you use. I would appreciate your answer
can you tell my how that used oil react with oxidisers? ore how is that staff viscosity made Im not shure how temperature resistance is made of oil ore their viscosity .
And is it posibel chemicaly to turn that oil to diferent fuel tipes with out destiler? Im wondering because I like the idea of useing seperators for my car most clean burn I get from alcohole and I belive less polution at exaust Im not shure tought if it is posibel to use oil and alcohole together???
Can you please help with all the ingredients for bleaching used engine oil
The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
Добрый день.сода полностью погасила кислоту?
can you also not use it as engine oil again ? aswel as diesel feul?
You can convert it back to motor oil by adding required additives.
You're great Sir! God bless you. Can I ask you if I can do this bleaching method for my waste motor oil but it is not distilled oil, it is a centrifuged oil product of centrifugation process. I don't do distillation process of cleaning waste oil. I am just cleaning my waste oil through centrifuge machine. The centrifuged oil is black, I want to bleach it to make it a little bit transparent. I saw this video and I want to try it also. I am not sure if I can do the same process with the centrifuge oil,not distilled oil. Thank you.
Hi, no it is really difficult to bleach used motor oil as such, you may try this method, but keep the oil at about 50c: th-cam.com/video/YUT4ZQMBgVo/w-d-xo.html you may make it cleaner, not transparent.
@@santeryi9 thank you so much sir.
Sir what is the filter used ?
great experiment . can one use the same process to bleach kerosene to pure colourless
Yes, you can
What chemical you added to clear the color?
baking soda??
What is the purpose of all this ? Doesn't "black diesel" work just as well ?
First, a modern engine will not be able to digest black diesel. Some old stationery ones will give no hack about the fuel type or quality. Second, any fine-filtered used motor oil is still packed with unburnable additives that are not so great for a fuel system. The benefit of this process is - the vehicle's engine works the same as with the standard diesel fuel, with no smoke, no coked injectors, and no busted fuel pump. Also, there is no need for a double fuel tank system to switch from one fuel to another to flush the pump and injectors before stopping or starting the engine. In other words - one can make regular diesel fuel in a backyard
You are a great man. Applause!
What percentage of baking soda is added?
10% of 10% solution.
Sir what is ratio backing soda u are use in this?
salaam
can you pls give me your whatsApp number or whatsApp me +93708880838
How do i treat used oil in large volume
How to make emulsion fuel?
What ml of sulfuric acid can be added to 150litres of diesel and also of triethanolamine
Contact whatapp
+919930708046
He told something about 1/10 if I listened correct...
Can i use HCL ?
What is HCL? hydrochloric acid? no.
How much the temperature of the oil
Chemical bleaching - from 20c to 60c, in this case 20c
If pyrolysis oil is bleached by this method, would it be useable in an engine without fractionation?
No, you will need to separate the light fraction first.
Enjoying the process
Qual nome do produto?
صديقي احتاج لماده تزيل الرائحه الكريهه للوقود البنزين
هل هذا البنزين بحد ذاته له رائحة كريهة، أو أن رائحة البنزين تشبه رائحة البنزين، هل هذا لإزالة الروائح الكريهة من الوقود؟
Can you use sulphuric acid in bigger quantities of used motor oil to clean it.just use 1% of it?
what is the concentration of the acid? 50% 95%?
@@mooobash3590 98
Nice one Bro
Thanks 🔥
ایا میتوانید به من بگویید..بعد از شفاف کردن.چه مواد افزودنی اضافه کنیم..برای تبدیل ان به روغن موتور
شما باید تصمیم بگیرید که روغن شما چه خواصی خواهد داشت، سپس باید به اصطلاح استانداردهای اعمال شده برای هر نوع روغن را بیابید، این استانداردها خواصی را که روغن و همه مواد افزودنی باید بر حسب درصد رعایت کنند، فهرست می کنند.
Is it bentonite soda ? Or which one soda it is ?
Just baking soda, check this video: th-cam.com/video/YUT4ZQMBgVo/w-d-xo.html
8 14:01 a0mjh.yuyjdvnh
Lj7tjgbn6uk?99u O
Fn2q.
9UIR54H😢😮😅😊😮😢🎉😂❤@@santeryi9
Is it car oil or cooking oil
it is a base oil obtained from car oil distillation: th-cam.com/video/VH5P_Jt2Nvg/w-d-xo.html
Great sir👍
Thanks.
السلام عليكم ماهي اسم الماده التي تصفي الدهن المستعمل
هناك نوعان من المكونات ، الأول هو حمض الكبريتيك المركز ، والثاني هو صودا الخبز.
How much have you added baking soda?
I am adding 1% by volume of soda 10% solution
Are you adding 10% of baking soda for total volume of oil. Or total volume of sulfuric acid?
What is the white substance that you added please? I want her name
Baking soda
@@santeryi9 The name of the liquid added in the first please
@@otmanealaoui6001 acid
Why the oil is clean and so lequied
It is oil distillate th-cam.com/video/v6Wk4WkM2XY/w-d-xo.html
my eyes deceive me....you have glassware on the bench....lol good to see you my friend
Thanks a lot, some glassware is common for me, though not really included in my videos.
@@santeryi9 All the best this Holiday Season my friend. Nephew is kicking around the island somewhere. I think everyone should have their own glassware lab (complete lab) 🙂
You are man my frent thanks
Hi, does this method work for plastic pyrolysis diesel?
Yes it will work with diesel from plastic as well.
@@santeryi9 Is there a method that works for tire oil?
@@metincetin2980 you can try this one: th-cam.com/video/YUT4ZQMBgVo/w-d-xo.html
Can reuse as fuel or diesel?
yes, just run a copper stripe test first, and use.
Sir can u please tell me the recipe for mm liter wise
Es muy apreciable el cambio felicidades
How Can make 01lts pls help thanks
what is the powder sir ?
Baking soda.
What are the chemical with out filtering
there are two components, first - sulfuric acid, second baking soda.
@@santeryi9 you know with out heating & filtering. Formula
Good morning Sir, I try several time to clear used engine oil to clear as your method, but unfortunately I couldn't do it. I used 200mi used oil and 2ml sulfuric acid, baking soda please help me to do this properly thanking u.
I am cleaning already distilled oil, not the one directly from a sump.
If I listened correct, you would need 20ml sulfuric acid for 200ml oil.
@@markhonigschmid6116you didn’t it’s 2ml
What is the white thing
silica gel, check this method: th-cam.com/video/YUT4ZQMBgVo/w-d-xo.html
try cornstarch or gelatin as used to clean up cooking oil
Doesn't work for fossil oil
@@antoniosestar3671 damn how do you know this?
@@namenotshown9277 because the black color is from oxidation, not from impurities like in cooking oil
@@antoniosestar3671 ok thankyou I see its actually very complex process to make oil new again......too hard for me
@@namenotshown9277 I already do it at home, its not that hard once you get your distillation going
Thanks for your help
Very Nice
What's that white thing? CaO?
baking soda.
我听不懂英文。白色液体是什么啊
苏打粉
This is two cool/so great
Plz provide description
Dear sir
Alek polek
Sir I see ur 2nd video for cleaning waist oil
Sir please can u tell me ur 2nd compound what is in whit bottle
I no it's ur secrets
And its my request
Please what is u use for 2nd ingredients
Plz
Triethanolamine.
@@santeryi9 love u sir
Now I m subscribe ur channel
Thanks a lot.
Can you share the name of the second chemical that you used ?
Baking soda, sodium bicarbonate
Can also The separated base oil was then mixed with activated alumina at a proportion of 1:5 alumina. The alumina was added to remove the dark color. The same method was employed in the Toluene, 1-butanol, and ethanol and also with Toluene, 1-butanol and isopropanol. The same method was working in the Toluene, 1-butanol, and isopropanol by solvent to oil ratio 1:2 and 1:3
Goodjob
Lo triste no me deja traducir😣
0:47
It's not engine oil ....
It is a waste engine oil that was distilled first and become so called base oil.
Bro, use gloves when handling conc sulphuric acid
Thanks
Butt oil have smell
How get his smell
The method helps to reduce or eliminate the smell as well.
@@santeryi9
I have a small unit in my home
Means I m cleaning oil with
Formic acid and bleaching earth
With hot temperature
Oil clean very well but oil have bad
smell
Im in lahore Pakistan
Ur waist oil is not to much dirty
Butt my waist oil is to much black very dark black he have to all ready to much bad smell u no what type smell
16 minutes of stirring oil wtf
You can fast forward, just wanted to show the process without cuts, so not accused of lie.
how can i get i touch with you
این روغن کارکرده نیست.
sulfuric acid - it is very bad idea!!!! Engine is ded! A modern fuel have a 0,001%!
Yes, you have to neutralize it, believe me, the oil companies are using the sulp[huric acid to bleach the fuel, the very same one that you get from the petrol station, in my case I do baking soda, it
is alkali but not so aggressive as hydroxide, after that, you still need
to use a bit of absorbent and if doubtful, run the copper strip test
and check the PH.
@@santeryi9 soda - work only 30%
@@santeryi9 "the oil companies are using the sulp[huric acid to bleach the fuel" - no, do not use!!!! Now only a mechanical cleaning method is used! - and therefore 0.001% sulfur! Also, the use of zinc catalysts helps to neutralize sulfur in petroleum during distillation. You do not understand at all the processes of petrochemicals and alcohol distillation.
Sorry Igor, yes you are the most genius person, you know everything, about modern petrol and alcohol distillation, so please tell me if you have at least one patent in this particular field, explain about proper petroleum distillation to the person from Burkina Faso, who tries to make a little bit of fuel for his farm equipment... anyway yes you are the smart person, but honestly your Ukrainian diesel and petrol are far from perfect, In most cases it is made out of natural gas condensate, somewhere around Chernovci, and no one in Ukraine makes it the way you mentioned, moreover it is sounds like you are trying to attract attention to your channel with my help by starting a controversy, accusing me to be dumber than you.
@@santeryi9
1) I have another channel!
2) I know what I say because I was on refineries in the EU!
3) Yes I am currently in the process of patenting (4 inventions) - so I can not show the equipment!
4) It is not necessary to make conclusions on video on my channel - it is 1% of all experiments.
5) I live in Spain and I got an Immigrant start-up visa to Canada.
6) I have state support in Spain.
7) If you want to talk, then call and I will explain in detail what is the your problem....
Thank you for sharing your experiences with us.
I left a comment on your contact page.
Waiting for your response
Can you please help with all the ingredients for bleaching used engine oil
Contact whatapp
+919930708046
Thank you for sharing your experiences with us.
I left a comment on your contact page.
Waiting for your response