I Can't Leave ANYTHING Stock..... Can Am Defender Gets A New Look!!!!!
ฝัง
- เผยแพร่เมื่อ 27 ส.ค. 2024
- We Install some goodies on the Can Am Defender we just purchased!! This thing looks sweet!!!
Don't forget to head over to www.baldeagle.com for all you JH Diesel Merch!!
Put a JH Diesel wrap on it and it will be ready to turn over into Cleeter's pond.
Hellz Yeah That Would Be Sick & Really Cool
Hahah. 3 videos later. I just couldn't keep it outta that water hole. I just love boggin
Hahaha! My coffee darn near shot out of my nose when I read this. Brutal lol
Fucking savage 🤣🤣
Put the spacers on the rear to bring them out more even with the fronts
Agreed, would definitely make it look better like that
@@michaelparker6954 Definitely going to try it. Might need a little bit smaller ones than what I have
@@JHDieseland4X4 You probably know this already, and more than I do, but you want to minimize the scrub radius of the front tires, especially when you are running oversized tires, to ensure you are not putting unnecessary stress on your hub and tie rods. Near zero scrub radius is ideal, which is the point at which the kingpin angle intersects the ground, which therefore acts as the pivot point for the tire. If you have an off center pivot point, and you drive hard through mud, you are applying a lot of force on the tires causing them to spread away from eachother, blowing apart your front end.
*edit* so, in summary, not having the spacers is better from a technical perspective.
Definitely have to space the back or order the correct offset rims to compensate.
Super atv is in my backyard, about 20 minutes from me . They are great people that stand behind what they sell . I've watched them grow and it's awesome to see them succeed, from lil ole Madison, Indiana. Thanks for sharing
Clutch kit does wonders on these machines saves your belts as well with the bigger tires. I own a 21 defender. I tuned it through 5 star as well and she scoots out now.
Which kit did you use? Did 35’s on my limited and looking into 5 star also.. Epi mudder is kit I’m looking at now
some light tint all the way around would look good... especially with the black...
No spacer was definitely the move... great upgrades, looks sic!
Probably need the spacers on the rear so they match the front width
Bring lawn mower racing on.. Cleetus needs this
Us Canadians love supplying our southern (and warmer) brethren fans! JH, Boosted Boyz, KSR, Goofy, Fasterproms, Coop Spagett and most certainly the main players @ PFI Speed, Gordo, Brent and Jamie!
The more rad stuff uploaded equates to increased beasts!!! Thanks dude!
Weather it be an X3, Defender, or any other unit, you can’t beat them Canned-hams. Simply the best out there right now.
That's all they were was light bars. I had a triple double in a 79 Chevy short bed that was plastic but looked awesome. That was around 92 when I had that
The shoutout to Caleb with Shifted Ind was cool, I run their adapters on my duramax for my 16.5 welds. His stuff is the best!
I know this things gonna be fun in the pits! Keep doing what your doing man ,hope I'm on your level one day!
JH is the man!
That's a nice clean rig. Perfect for cruising around the mean streets of Bradenton!
Your going to love the HD springs. I put them in mine and it illuminated the stock squat really well!
Great start! We are coming out with a Long Travel kit for the Defender right now to add some width and allow for larger tires and a smooth ride.
Awesome!! Love y’all’s work!!
@@JHDieseland4X4 Thanks!! Can’t wait to see what you do next!!
Put some lasfit LEDs and that'll be set. Just an easy plug in play and probably the best LED that's budget friendly, not cheap but not expensive. Canadian brand
I just happen to run into this video, and MAN!! this video is so crisp and clear! Kudos😎👍
New tires look sick af.
Definitely need to get 4in portals for it with them tires. You wont break as much stuff on the unit if you have them.
Love the CanAm.
Curious as to why you haven’t built a diesel drag car/truck to go out with Cleet and them though. Feel like you could make a bad unit
It is in the works!! Keep up with the channel in the near future! Lots of big projects coming up
@@JHDieseland4X4 that’s what I like to hear!!
It looks so clean brother. Nice 👌
Nice video. Keep em comin
That's a sweet machine!
You need a couple JH stickers!
Thanks for sharing!
defiantly needs some tint, that is gonna finish the look off. cant wait to see it finished
Needs a alignment. That passenger front wheel is toed out a bit. Looks frickin cool though.
👍Great choice 1st thing u replace on Can-an is stock tie rods
Amazing how those wheels and tires woke that thing up!!! 🔥
You might put the spacers on the rear axles as they don't seem to stick out as far as the front
Thing looks wicked! My parents bought the camo version for a lake buggy and hunting buggy I’m gonna have to show them this so they understand how big of a necessity this is 🤷🏻♂️😂
Those new shoes are sick! The 27” tires are just to small. Especially in the deep ruts.
Good call on no spacers IMO. Beautiful build
Jh you should put the 2 inch spacers in the rear
Too match the front, it looks odd now.
Looks sick but put spacers on back to flush rim s wmwith front and get some 1 to 1.5 pucks for shock u can fit 35s all day no rub. But clean ass limited
Great choice of wheels, and tires. Looks way better.
JH WHO???
Just a suggestion, put those spacers on the rear tires. Might help stability and even might look cool.
👍🇺🇸👍 Ozark Mountains
Nice machine. Hopefully we see the snorkel mod! 🤙🏽
Put the spacers in the rear to even it out
Put the wheel spacers on the rear. Then the front and rear wheels will extend out the same distance.
Can’t wait to see the “big truck” back in action,
FOR THE LOVE OF GOD Tint Those Windows next Justin please!!! LOL....she is looking absolutely mean with those boggers and nice rims on there, now Wint the Tindows and have the JH Diesel and 4×4 "see threw" mirral covering the entire back window😲😲😲😮....SHE WILL BE SICK BROTHER!!! Great moves so far man ....see you on the next 🤙🤘🦅....ps typed this RIGHT before you said yout going to tint LOL
Ran a set of 35 inch moto havoc on defender with forward arms and 2inch puck lift .. Road great rubbed at full lock flexing but heat gun fixed that
You should put the spacers on the rear so you don't have the offset front and rear visual its like the fronts are saying let's get some but the rears are like naw ill just watch you have fun
The stock tires maybe a little softer sidewall that could cause to rock side to side with a big load, I think you did the right thing with your tire selection should have much more stability. The Can-Am is looking assume, I hope it brings you trouble free ride for years to come.
Recently got my 2022 Defender xmr and they are such bad ass units
Braydon price just posted a video on here and he bent his tie rod or rods so it’s a good thing you put stronger ones in it
Wheels 👍
Ride hight👎 just would look better with at lease 4" lift to bring in those front wheels a bit. Otherwise put spacers at lease on rear wheels. To even out the look and better travel.
You gotta put on led bar on front and glow kit with whips. I think you will enjoy it more and get more use in the night. S×S guys probably give ya great price on the stuff😊👍
And some ideas for more power in budget. Just a suggestion 👍✌
Two in one 💪😊👍work n play machine.
Did great on the wheel style and tire pic💯😊👍
Calebs spacers are the only spacers you'll need.
It's narrow in the back, throw them spacers in the back🤟🤟🤟🤟
Add the spacers to the rear to even out the stance
You are right it's amazing how tires and rims changes the look of a rig. She's look good but something is still missing on her. 🤔 just a thought camo rap the girl? And loving the shop content keep it coming.
"...6 inches. It just looks massive, ok?" 🤣🤣🤣
CT Tie rod would work perfect for what u want bro
Cool machine, you should let me buy it.
Based on how it looks from here.... you need the spacers on the rear ONLY.
"Gonna sneak it in the back door" he says.
I don't think thats the first time.
😆😆😆
Simple clean
I would put the spacers on the two back tires
Clean rig!!
Looks so much better
It's a beauty bar for the bed like the ig big foot monster truck keep up the videos my guy oh yeah don't touch the epa crap on the can am you already know that though salute from oakland california
🤘😎👍 should put the spacers on the rear.
Window tint will look sick. Make sure to tint the windshield too
Always do spacers on the rear. They are narrower in the rear
Put the spacers on the rear wheels so they track the same as the front.
Put the spacers on the back I think they look a lil sunken in
All you need now is signal lites for ya defender
Boggers for the win every day. She is a beaut. Perfect upgrade I would say.👍✌️
Looks way better
Jh ur rig looks badass with that control arm kit and tires i dig it
Rig looks badass
Good Stuff👍👍
That thing looked wimpy stock but it looks mean as hell now with the suspension upgrades, boggers and 20’s
Sweet unit! Tires and wheels look awesome!
I like seeing the process JH 👍
That defender looks bad ass with the new wheels and tires hell it’s got same size tires as my truck 😂
I see you did the upgraded ball joints also
Looks like you need the spacers on the back. I mean if the front pokes more than the back.
Put the spacers in the rear
In Australia it’s called a “sports bar”
Looks like you could use the spacers on the rear of the machine.
Put the spacers on the back
Shoulda got moorehead off-road arms and rack instead of the Walmart specials
You need a sneaky peat 🤘
POP THR SPACERS IN THE BACK IT LOOKS UNBALANCED WITH THE REAR FURTHER IN THEN THE FRONTS
When you beef the tie rods up your looking to bend the next weakest part which is a $400 rack instead of a a $50 tie rod
Tie rods got a bad bad rep of falling appart just crusing on the defenders
Or when your pulling out of snow in 4x4 locked it will just go ahead and bend and pop your axle out... yeah he made the right choice.
JH y'all rock! Love the channel and content! I'm here for the algorithm! Peace
I would use the spacers on the back it looks to narrow in the back.
I've been to that Publix!
I need one of these so bad, but lord the cost. I have to ride my atv to the bottom of my mountain to get to my truck during bad winters, like the past few weeks (can get up just going down on ice is not fun) Heated and covered so I could plow in shorts and a tea-shirt! Its about time they became street legal to. I mean your spending 30k on it you better be able to drive it down the road. Would have to drive it around in snow storms to make money to pay for it. Even though they are costly, for me that would be an investment for many years of comfort plowing and riding around my 300ac farm, only way to justify that cost.. after my boat is paid off LOL
Its smart you got the better tierods because braydon price just tore his up the other day riding around his property
Maybe put a spacer on the back wheels?
Sweet enjoying the defender videos. 👍
those wheels and tires are killer.
I've never seen Justin without a dip in.
You obviously have enough money to spare to not worry about breaching new vehicle warranty. Nice position to be in 👍
Nothing he did will void the warrenty, i have had 2 defenders and from lifts to 32 inch tires, wheel spacers forward a arms, my dealer has been great.
Man the CanAm is looking sweet!
totally changed the look!
If you ever bend your satv control arms switch to Jake moorhead's arms for a defender. I've seen one of my friends bend 2 portal brackets without damaging his control arms.
Surprised you didn't get ahold of the guys from up here in Michigan at SxSBlog.....
Lookin goooood.