Holset H1E H1C Turbo Rebuild
ฝัง
- เผยแพร่เมื่อ 9 ก.พ. 2025
- Buy H1E H1C Turbo Rebuild kit: turbolabofameri...
Buy H1E 64 x 76 10 blade Turbine Shaft: turbolabofameri...
H1c H1E upgrade rebuild kit : turbolabofameri...
H1E H1C WH1C WH1E rebuild kit : 421b62.myshopi...
62mm H1C H1E housing, wheel, plate, and rebuild kit upgrade : 421b62.myshopi...
67mm WH1C turbine housing upgrade with Wastegate : 421b62.myshopi...
64mm WH1C turbine housing upgrade with Wastegate : 421b62.myshopi...
H1C hx35 60mm by 70mm T3 .82 turbine housing 3 inch v band exit : 421b62.myshopi...
67mm Hx40 t3 .82 housing 3 inch exit : 421b62.myshopi...
64mm hx40 t3 .82 housing 3 inch exit : 421b62.myshopi...
64mm by 76mm hx40 10 blade turbine : 421b62.myshopi...
67mm by 76mm hx40 10 blade turbine : 421b62.myshopi...
Ordered the kit last night can’t wait to get it and get it rebuilt
How can we buy turbocharger service kit from Bangladesh?
Where can I find this rebuild kit?
What product do you use to clean your turbos before rebuilding them
Where can I find a set of a snap ring pliers that size for the hx35/40 rings/clips?
thrust collar to the thrust Bearing looks wrong to me
nice video, keep up the good work!
Can you rebuild my turbo
Followed your process step by step and can't get the shaft to spin and seat correctly, I'm not sure what I'm doing wrong, any help Is greatly appreciated
I’m not sure. I had some people put the spacer in upside down, or the selector didn’t go in the pocket, if you are installing an hx compressor wheel and using the hx collar the plate has to be machined for the shorter collar
@@turbolabamerica I got a rebuild that came with a OE h1c thrust collar. How much would it be for you to rebuild it and do the upgraded wheel and with shipping? My zip code is 98632
Do you have a idea of turbo longevity when the C- clips are installed incorrectly.
(flat side toward the bearings)
Likely wont matter it’s just good practice
Will this kit work on the wh1c from a 94?
Did you ever get a response or order the kit? I have the 1994 wh1c and am curious as well
@@branmanhosmaniac3489 I ordered the kit on Amazon I believe. Also a new turbine wheel because I messed it up. Left hand thread
I have a new H1e it has endplay is it ok?
jiemrvow the wheel should not move in and out or axial more than .002”
@@turbolabamerica This moves more than .002
The play is only axial
Can I tighten it up easily it is a new turbo.
can i rebuild without balacing?
Yes
can i rebuild without balacing?
No, most Definitely NOT!!!! you could be super brave and make index's n re align them as long as your not changing the wheel.....but rule of thumb is no...they spin far to fast.....even after balancing the index mark alignment bothers me....lol